gpsp/arm/arm_stub.S

858 lines
39 KiB
ArmAsm
Raw Normal View History

#include "../gpsp_config.h"
#define defsymbl(symbol) \
.align 2; \
.type symbol, %function ;\
.global symbol ; \
.global _##symbol ; \
symbol: \
_##symbol:
.text
.align 2
#define REG_R0 (0 * 4)
#define REG_R1 (1 * 4)
#define REG_R2 (2 * 4)
#define REG_R3 (3 * 4)
#define REG_R4 (4 * 4)
#define REG_R5 (5 * 4)
#define REG_R6 (6 * 4)
#define REG_R7 (7 * 4)
#define REG_R8 (8 * 4)
#define REG_R9 (9 * 4)
#define REG_R10 (10 * 4)
#define REG_R11 (11 * 4)
#define REG_R12 (12 * 4)
#define REG_R13 (13 * 4)
#define REG_R14 (14 * 4)
#define REG_SP (13 * 4)
#define REG_LR (14 * 4)
#define REG_PC (15 * 4)
#define REG_CPSR (16 * 4)
#define CPU_MODE (17 * 4)
#define CPU_HALT_STATE (18 * 4)
#define REG_N_FLAG (20 * 4)
#define REG_Z_FLAG (21 * 4)
#define REG_C_FLAG (22 * 4)
#define REG_V_FLAG (23 * 4)
#define CHANGED_PC_STATUS (24 * 4)
#define COMPLETED_FRAME (25 * 4)
#define OAM_UPDATED (26 * 4)
#define REG_SAVE (27 * 4)
#define REG_SAVE2 (28 * 4)
#define REG_SAVE3 (29 * 4)
#define REG_SAVE4 (30 * 4)
#define REG_SAVE5 (31 * 4)
#define reg_a0 r0
#define reg_a1 r1
#define reg_a2 r2
#define reg_base r11
#define reg_flags r9
#define reg_cycles r12
#define reg_x0 r3
#define reg_x1 r4
#define reg_x2 r5
#define reg_x3 r6
#define reg_x4 r7
#define reg_x5 r8
#define MODE_SUPERVISOR 3
2021-07-31 00:20:18 +02:00
@ Memory offsets from reg_base to the different buffers
#define IWRAM_OFF -0xA8000
#define VRAM_OFF -0x98000
#define EWRAM_OFF -0x80000
#define SPSR_RAM_OFF 0x100
2021-10-23 23:59:51 +02:00
#define STORE_TBL_OFF 0x118
#define REGMODE_RAM_OFF 0x400
#define OAM_RAM_OFF 0x500
#define PAL_RAM_OFF 0x900
#define RDMAP_OFF 0xD00
#define IOREG_OFF 0x8D00
2021-10-23 23:59:51 +02:00
#if __ARM_ARCH >= 6
#define extract_u16(rd, rs) \
uxth rd, rs
#else
#define extract_u16(rd, rs) \
bic rd, rs, #0xff000000; \
bic rd, rd, #0x00ff0000
#endif
@ Will load the register set from memory into the appropriate cached registers.
@ See arm_emit.h for listing explanation.
#define load_registers_arm() ;\
ldr reg_x0, [reg_base, #REG_R0] ;\
ldr reg_x1, [reg_base, #REG_R1] ;\
ldr reg_x2, [reg_base, #REG_R6] ;\
ldr reg_x3, [reg_base, #REG_R9] ;\
ldr reg_x4, [reg_base, #REG_R12] ;\
ldr reg_x5, [reg_base, #REG_R14] ;\
#define load_registers_thumb() ;\
ldm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5}
@ Will store the register set from cached registers back to memory.
#define store_registers_arm() ;\
str reg_x0, [reg_base, #REG_R0] ;\
str reg_x1, [reg_base, #REG_R1] ;\
str reg_x2, [reg_base, #REG_R6] ;\
str reg_x3, [reg_base, #REG_R9] ;\
str reg_x4, [reg_base, #REG_R12] ;\
str reg_x5, [reg_base, #REG_R14] ;\
#define store_registers_thumb() ;\
stm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5}
@ Returns an updated persistent cpsr with the cached flags register.
@ Uses reg as a temporary register and returns the CPSR here.
#define collapse_flags_no_update(reg) ;\
ldr reg, [reg_base, #REG_CPSR] /* reg = cpsr */;\
bic reg, reg, #0xF0000000 /* clear ALU flags in cpsr */;\
and reg_flags, reg_flags, #0xF0000000 /* clear non-ALU flags */;\
orr reg, reg, reg_flags /* update cpsr with ALU flags */;\
@ Updates cpsr using the above macro.
#define collapse_flags(reg) ;\
collapse_flags_no_update(reg) ;\
str reg, [reg_base, #REG_CPSR] ;\
@ Loads the saved flags register from the persistent cpsr.
#define extract_flags() ;\
ldr reg_flags, [reg_base, #REG_CPSR] ;\
msr cpsr_f, reg_flags ;\
#define save_flags() ;\
mrs reg_flags, cpsr ;\
#define restore_flags() ;\
msr cpsr_f, reg_flags ;\
@ Align the stack to 64 bits (ABIs that don't require it, still recommend so)
#define call_c_saved_regs r2, r3, r12, lr
2011-09-04 16:37:46 +02:00
@ Calls a C function - reloads the stack pointer and saves all caller save
@ registers which are important to the dynarec.
#define call_c_function(function) ;\
2011-09-04 16:37:46 +02:00
stmdb sp!, { call_c_saved_regs } ;\
bl function ;\
2011-09-04 16:37:46 +02:00
ldmia sp!, { call_c_saved_regs } ;\
@ Update the GBA hardware (video, sound, input, etc)
@ Input:
@ r0: current PC
#define return_straight() ;\
bx lr ;\
#define return_add() ;\
add pc, lr, #4 ;\
#define load_pc_straight() ;\
ldr r0, [lr, #-12] ;\
#define load_pc_add() ;\
ldr r0, [lr] ;\
#define arm_update_gba_builder(name, mode, return_op) ;\
;\
defsymbl(arm_update_gba_##name) ;\
load_pc_##return_op() ;\
str r0, [reg_base, #REG_PC] /* write out the PC */;\
;\
save_flags() ;\
collapse_flags(r0) /* update the flags */;\
;\
store_registers_##mode() /* save out registers */;\
call_c_function(update_gba) /* update GBA state */;\
;\
ldr r1, [reg_base, #COMPLETED_FRAME] /* return if new frame */;\
cmp r1, #0 ;\
bne return_to_main ;\
;\
mvn reg_cycles, r0 /* load new cycle count */;\
;\
ldr r0, [reg_base, #CHANGED_PC_STATUS] /* load PC changed status */;\
cmp r0, #0 /* see if PC has changed */;\
bne 1f /* go jump/translate */;\
;\
load_registers_##mode() /* reload registers */;\
restore_flags() ;\
return_##return_op() /* continue, no PC change */;\
;\
1: ;\
ldr r1, [reg_base, #REG_CPSR] /* r1 = flags */;\
ldr r0, [reg_base, #REG_PC] /* load new PC */;\
tst r1, #0x20 /* see if Thumb bit is set */;\
bne 2f /* if so load Thumb PC */;\
;\
load_registers_arm() /* load ARM regs */;\
call_c_function(block_lookup_address_arm) ;\
restore_flags() ;\
bx r0 /* jump to new ARM block */;\
2: ;\
load_registers_thumb() /* load Thumb regs */;\
call_c_function(block_lookup_address_thumb) ;\
restore_flags() ;\
bx r0 /* jump to new ARM block */;\
.size arm_update_gba_##name, .-arm_update_gba_##name
arm_update_gba_builder(arm, arm, straight)
arm_update_gba_builder(thumb, thumb, straight)
arm_update_gba_builder(idle_arm, arm, add)
arm_update_gba_builder(idle_thumb, thumb, add)
@ Cheat hooks for master function
@ This is called whenever PC == cheats-master-function
@ Just calls the C function to process cheats
#define cheat_hook_builder(mode) ;\
defsymbl(mode##_cheat_hook) ;\
save_flags() ;\
store_registers_##mode() ;\
call_c_function(process_cheats) ;\
load_registers_##mode() ;\
restore_flags() ;\
bx lr ;\
cheat_hook_builder(arm)
cheat_hook_builder(thumb)
@ These are b stubs for performing indirect branches. They are not
@ linked to and don't return, instead they link elsewhere.
@ Input:
@ r0: PC to branch to
defsymbl(arm_indirect_branch_arm)
save_flags()
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0
defsymbl(arm_indirect_branch_thumb)
save_flags()
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0
defsymbl(arm_indirect_branch_dual_arm)
save_flags()
tst r0, #0x01 @ check lower bit
bne 1f @ if set going to Thumb mode
add r0, #2 @ two LSB are cleared after
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0 @ keep executing arm code
1:
store_registers_arm() @ save out ARM registers
ldr r1, [reg_base, #REG_CPSR] @ load cpsr
load_registers_thumb() @ load in Thumb registers
orr r1, r1, #0x20 @ set Thumb mode
str r1, [reg_base, #REG_CPSR] @ store flags
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0
.size arm_indirect_branch_dual_arm, .-arm_indirect_branch_dual_arm
defsymbl(arm_indirect_branch_dual_thumb)
save_flags()
tst r0, #0x01 @ check lower bit
beq 1f @ if set going to ARM mode
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0 @ keep executing thumb code
1:
store_registers_thumb() @ save out Thumb registers
ldr r1, [reg_base, #REG_CPSR] @ load cpsr
load_registers_arm() @ load in ARM registers
bic r1, r1, #0x20 @ clear Thumb mode
str r1, [reg_base, #REG_CPSR] @ store flags
add r0, #2 @ two LSB are cleared after
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0
.size arm_indirect_branch_dual_thumb, .-arm_indirect_branch_dual_thumb
@ Update the cpsr.
@ Input:
@ r0: new cpsr value
@ r1: bitmask of which bits in cpsr to update
@ r2: current PC
defsymbl(execute_store_cpsr)
save_flags()
and reg_flags, r0, r1 @ reg_flags = new_cpsr & store_mask
ldr r0, [reg_base, #REG_CPSR] @ r0 = cpsr
bic r0, r0, r1 @ r0 = cpsr & ~store_mask
orr reg_flags, reg_flags, r0 @ reg_flags = new_cpsr | cpsr
mov r0, reg_flags @ also put new cpsr in r0
store_registers_arm() @ save ARM registers
ldr r2, [lr] @ r2 = pc
call_c_function(execute_store_cpsr_body)
load_registers_arm() @ restore ARM registers
cmp r0, #0 @ check new PC
bne 1f @ if it's zero, resume
restore_flags()
add pc, lr, #4 @ return
1:
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0 @ return to PC ARM address
.size execute_store_cpsr, .-execute_store_cpsr
@ Restore the cpsr from the mode spsr and mode shift.
@ Input:
@ r0: current pc
defsymbl(execute_spsr_restore)
save_flags()
2021-07-31 00:20:18 +02:00
add r1, reg_base, #SPSR_RAM_OFF @ r1 = spsr
ldr r2, [reg_base, #CPU_MODE] @ r2 = cpu_mode
ldr r1, [r1, r2, lsl #2] @ r1 = spsr[cpu_mode] (new cpsr)
str r1, [reg_base, #REG_CPSR] @ update cpsr
mov reg_flags, r1 @ also, update shadow flags
@ This function call will pass r0 (address) and return it.
store_registers_arm() @ save ARM registers
call_c_function(execute_spsr_restore_body)
ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr
tst r1, #0x20 @ see if Thumb mode is set
bne 2f @ if so handle it
load_registers_arm() @ restore ARM registers
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0
2:
load_registers_thumb() @ load Thumb registers
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0
@ Setup the mode transition work for calling an SWI.
@ Input:
@ r0: current pc
#define execute_swi_builder(mode) ;\
;\
defsymbl(execute_swi_##mode) ;\
save_flags() ;\
2021-07-31 00:20:18 +02:00
add r1, reg_base, #REGMODE_RAM_OFF /* r1 = reg_mode */;\
/* reg_mode[MODE_SUPERVISOR][6] = pc */;\
ldr r0, [lr] /* load PC */;\
str r0, [r1, #((MODE_SUPERVISOR * (7 * 4)) + (6 * 4))] ;\
collapse_flags_no_update(r0) /* r0 = cpsr */;\
2021-07-31 00:20:18 +02:00
add r1, reg_base, #SPSR_RAM_OFF /* r1 = spsr */;\
str r0, [r1, #(MODE_SUPERVISOR * 4)] /* spsr[MODE_SUPERVISOR] = cpsr */;\
bic r0, r0, #0x3F /* clear mode flag in r0 */;\
orr r0, r0, #(0x13 | 0x80) /* supervisor mode + disable IRQ */;\
str r0, [reg_base, #REG_CPSR] /* update cpsr */;\
;\
mov r0, #MODE_SUPERVISOR ;\
;\
store_registers_##mode() /* store regs for mode */;\
call_c_function(set_cpu_mode) /* set the CPU mode to svsr */;\
load_registers_arm() /* load ARM regs */;\
;\
restore_flags() ;\
add pc, lr, #4 /* return */;\
execute_swi_builder(arm)
execute_swi_builder(thumb)
@ Start program execution. Normally the mode should be Thumb and the
@ PC should be 0x8000000, however if a save state is preloaded this
@ will be different.
@ Input:
@ r0: initial value for cycle counter
@ Uses sp as reg_base; must hold consistently true.
defsymbl(execute_arm_translate_internal)
@ save the registers to be able to return later
stmdb sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr }
mov reg_base, r1 @ init base_reg
mvn reg_cycles, r0 @ load cycle counter
@ Check whether the CPU is sleeping already, we should just wait for IRQs
ldr r1, [reg_base, #CPU_HALT_STATE]
cmp r1, #0
bne alert_loop
ldr r0, [reg_base, #REG_PC] @ r0 = current pc
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
tst r1, #0x20 @ see if Thumb bit is set
bne 1f @ if so lookup thumb
load_registers_arm() @ load ARM registers
call_c_function(block_lookup_address_arm)
extract_flags() @ load flags
bx r0 @ jump to first ARM block
1:
load_registers_thumb() @ load Thumb registers
call_c_function(block_lookup_address_thumb)
extract_flags() @ load flags
bx r0 @ jump to first Thumb block
@ Epilogue to return to the main thread (whatever called execute_arm_translate)
return_to_main:
@ restore the saved regs and return
ldmia sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr }
bx lr
#define store_align_8() ;\
and r1, r1, #0xff ;\
#define store_align_16() ;\
bic r0, r0, #0x01 ;\
extract_u16(r1, r1) ;\
#define store_align_32() ;\
bic r0, r0, #0x03 ;\
#define mask_addr_8(nbits) ;\
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
mov r0, r0, lsr #(32 - nbits) /* high bits are now clear */;\
#define mask_addr_16(nbits) ;\
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
mov r0, r0, lsr #(32 - nbits + 1) /* high bits are now clear */;\
mov r0, r0, lsl #1 /* LSB is also zero */;\
#define mask_addr_32(nbits) ;\
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
mov r0, r0, lsr #(32 - nbits + 2) /* high bits are now clear */;\
mov r0, r0, lsl #2 /* 2 LSB are also zero */;\
@ Vram, OAM and palette memories can only be accessed at a 16 bit boundary
#define mask_addr_bus16_32(nbits) mask_addr_32(nbits)
#define mask_addr_bus16_16(nbits) mask_addr_16(nbits)
#define mask_addr_bus16_8(nbits) \
mask_addr_16(nbits) \
extract_u16(r1, r1)
@ Write out to memory.
@ Input:
@ r0: address
@ r1: value
@
@ The instruction at LR is not an inst but a u32 data that contains the PC
@ Used for SMC. That's why return is essentially `pc = lr + 4`
2021-07-31 00:20:18 +02:00
#define execute_store_builder(store_type, str_op, str_op16, load_op, tnum) ;\
;\
ext_store_u##store_type: ;\
2021-07-15 21:27:38 +02:00
save_flags() ;\
ldr r2, [lr] /* load PC */;\
str r2, [reg_base, #REG_PC] /* write out PC */;\
store_align_##store_type() ;\
call_c_function(write_memory##store_type) ;\
b write_epilogue /* handle additional write stuff */;\
;\
ext_store_iwram_u##store_type: ;\
2021-07-15 21:27:38 +02:00
save_flags() ;\
mask_addr_##store_type(15) /* Mask to mirror memory (+align)*/;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #(IWRAM_OFF+0x8000) /* r2 = iwram base */;\
str_op r1, [r0, r2] /* store data */;\
sub r2, r2, #0x8000 /* r2 = iwram smc base */;\
load_op r1, [r0, r2] /* r1 = SMC sentinel */;\
2021-07-15 21:27:38 +02:00
cmp r1, #0 /* Check value, should be zero */;\
bne 3f /* if so perform smc write */;\
restore_flags() ;\
add pc, lr, #4 /* return */;\
;\
ext_store_ewram_u##store_type: ;\
2021-07-15 21:27:38 +02:00
save_flags() ;\
mask_addr_##store_type(18) /* Mask to mirror memory (+align)*/;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #EWRAM_OFF /* r2 = ewram base */;\
str_op r1, [r0, r2] /* store data */;\
add r2, r2, #0x40000 /* r2 = ewram smc base */;\
load_op r1, [r0, r2] /* r1 = SMC sentinel */;\
2021-07-15 21:27:38 +02:00
cmp r1, #0 /* Check value, should be zero */;\
bne 3f /* if so perform smc write */;\
restore_flags() ;\
add pc, lr, #4 /* return */;\
;\
ext_store_vram_u##store_type: ;\
2021-07-15 21:27:38 +02:00
save_flags() ;\
mask_addr_bus16_##store_type(17) /* Mask to mirror memory (+align)*/;\
cmp r0, #0x18000 /* Check if exceeds 96KB */;\
subcs r0, r0, #0x8000 /* Mirror to the last bank */;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #VRAM_OFF /* r2 = vram base */;\
restore_flags() ;\
2021-07-31 00:20:18 +02:00
str_op16 r1, [r0, r2] /* store data */;\
add pc, lr, #4 /* return */;\
;\
2021-03-26 13:00:08 +01:00
ext_store_oam_ram_u##store_type: ;\
mask_addr_bus16_##store_type(10) /* Mask to mirror memory (+align)*/;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #OAM_RAM_OFF /* r2 = oam ram base */;\
str_op16 r1, [r0, r2] /* store data */;\
2021-03-26 13:00:08 +01:00
str r2, [reg_base, #OAM_UPDATED] /* write non zero to signal */;\
add pc, lr, #4 /* return */;\
;\
3: ;\
ldr r0, [lr] /* load PC */;\
str r0, [reg_base, #REG_PC] /* write out PC */;\
b smc_write /* perform smc write */;\
2021-07-15 21:27:38 +02:00
@ for ignored areas, just return
ext_store_ignore:
add pc, lr, #4 @ return
#define store_lookup_table(store_type) ;\
2021-10-23 23:59:51 +02:00
.word ext_store_u##store_type /* -1: ignore, for > 0x0F */;\
2021-07-15 21:27:38 +02:00
.word ext_store_ignore /* 0x00: BIOS, ignore */;\
.word ext_store_ignore /* 0x01: ignore */;\
.word ext_store_ewram_u##store_type /* 0x02: ewram */;\
.word ext_store_iwram_u##store_type /* 0x03: iwram */;\
.word ext_store_u##store_type /* 0x04: I/O regs */;\
.word ext_store_u##store_type /* 0x05: palette RAM */;\
.word ext_store_vram_u##store_type /* 0x06: vram */;\
.word ext_store_oam_ram_u##store_type /* 0x07: oam ram */;\
.word ext_store_u##store_type /* 0x08: gamepak: ignore */;\
.word ext_store_u##store_type /* 0x09: gamepak: ignore */;\
.word ext_store_u##store_type /* 0x0A: gamepak: ignore */;\
.word ext_store_u##store_type /* 0x0B: gamepak: ignore */;\
.word ext_store_u##store_type /* 0x0C: gamepak: ignore */;\
.word ext_store_u##store_type /* 0x0D: EEPROM */;\
.word ext_store_u##store_type /* 0x0E: backup */;\
.word ext_store_ignore /* 0x0F: ignore */;\
2021-07-31 00:20:18 +02:00
execute_store_builder(8, strb, strh, ldrb, 0)
execute_store_builder(16, strh, strh, ldrh, 1)
execute_store_builder(32, str, str, ldr, 2)
@ This is a store that is executed in a strm case (so no SMC checks in-between)
ext_store_u32_safe:
2021-07-15 21:27:38 +02:00
str lr, [reg_base, #REG_SAVE3] @ Restore lr
save_flags()
call_c_function(write_memory32) @ Perform 32bit store
restore_flags()
2021-07-15 21:27:38 +02:00
ldr pc, [reg_base, #REG_SAVE3] @ return
ext_store_iwram_u32_safe:
mask_addr_8(15) @ Mask to mirror memory (no need to align!)
2021-07-31 00:20:18 +02:00
add r2, reg_base, #(IWRAM_OFF+0x8000) @ r2 = iwram base
str r1, [r0, r2] @ store data
2021-07-15 21:27:38 +02:00
bx lr @ Return
ext_store_ewram_u32_safe:
mask_addr_8(18) @ Mask to mirror memory (no need to align!)
2021-07-31 00:20:18 +02:00
add r2, reg_base, #EWRAM_OFF @ r2 = ewram base
str r1, [r0, r2] @ store data
2021-07-15 21:27:38 +02:00
bx lr @ Return
ext_store_vram_u32_safe:
mask_addr_8(17) @ Mask to mirror memory (no need to align!)
2021-07-15 21:27:38 +02:00
save_flags()
2021-07-31 00:20:18 +02:00
add r2, reg_base, #VRAM_OFF @ r2 = vram base
cmp r0, #0x18000 @ Check if exceeds 96KB
subcs r0, r0, #0x8000 @ Mirror to the last bank
str r1, [r0, r2] @ store data
restore_flags()
2021-07-15 21:27:38 +02:00
bx lr @ Return
2021-03-26 13:00:08 +01:00
ext_store_oam_ram_u32_safe:
mask_addr_8(10) @ Mask to mirror memory (no need to align!)
2021-07-31 00:20:18 +02:00
add r2, reg_base, #OAM_RAM_OFF @ r2 = oam ram base
2021-03-26 13:00:08 +01:00
str r1, [r0, r2] @ store data
str r2, [reg_base, #OAM_UPDATED] @ store anything non zero here
2021-07-15 21:27:38 +02:00
bx lr @ Return
2021-03-26 13:00:08 +01:00
2021-07-15 21:27:38 +02:00
write_epilogue:
cmp r0, #0 @ check if the write rose an alert
beq 4f @ if not we can exit
collapse_flags(r1) @ interrupt needs current flags
cmp r0, #2 @ see if the alert is due to SMC
beq smc_write @ if so, goto SMC handler
ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr
tst r1, #0x20 @ see if Thumb bit is set
bne 1f @ if so do Thumb update
store_registers_arm() @ save ARM registers
b alert_loop
1:
store_registers_thumb() @ save Thumb registers
alert_loop:
call_c_function(update_gba) @ update GBA until CPU isn't halted
ldr r1, [reg_base, #COMPLETED_FRAME] @ Check whether a frame was completed
cmp r1, #0
bne return_to_main
ldr r1, [reg_base, #CPU_HALT_STATE] @ Check whether the CPU is halted
cmp r1, #0
bne alert_loop @ Keep looping until it is
mvn reg_cycles, r0 @ load new cycle count
ldr r0, [reg_base, #REG_PC] @ load new PC
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
tst r1, #0x20 @ see if Thumb bit is set
bne 2f
load_registers_arm()
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0 @ jump to new ARM block
2:
load_registers_thumb()
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0 @ jump to new Thumb block
4:
restore_flags()
add pc, lr, #4 @ return
smc_write:
call_c_function(flush_translation_cache_ram)
lookup_pc:
ldr r0, [reg_base, #REG_PC] @ r0 = new pc
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
tst r1, #0x20 @ see if Thumb bit is set
beq lookup_pc_arm @ if not lookup ARM
lookup_pc_thumb:
call_c_function(block_lookup_address_thumb)
restore_flags()
bx r0 @ jump to new Thumb block
lookup_pc_arm:
call_c_function(block_lookup_address_arm)
restore_flags()
bx r0 @ jump to new ARM block
#define exec_ld_op_s8(mirrorbits) ;\
mov r0, r0, lsl #(32 - mirrorbits) ;\
mov r0, r0, lsr #(32 - mirrorbits) ;\
ldrsb r0, [r2, r0]
#define exec_ld_op_u8(mirrorbits) ;\
mov r0, r0, lsl #(32 - mirrorbits) ;\
mov r0, r0, lsr #(32 - mirrorbits) ;\
ldrb r0, [r2, r0]
#define exec_ld_op_s16(mirrorbits) ;\
mov r0, r0, lsl #(32 - mirrorbits) ;\
mov r0, r0, lsr #(32 - mirrorbits) ;\
ldrsh r0, [r2, r0]
#define exec_ld_op_u16(mirrorbits) ;\
mov r0, r0, lsl #(32 - mirrorbits) ;\
mov r0, r0, lsr #(32 - mirrorbits) ;\
ldrh r0, [r2, r0]
#define exec_ld_op_u32(mirrorbits) ;\
mov r0, r0, lsl #(32 - mirrorbits) ;\
ldr r0, [r2, r0, lsr #(32 - mirrorbits)] ;\
2021-07-31 00:20:18 +02:00
#define execute_load_builder(load_type, albits, load_function, tnum) ;\
;\
ld_bios_##load_type: /* BIOS area, need to verify PC */;\
save_flags() ;\
ldr r1, [lr] /* r1 = PC */;\
mov r2, r1, lsr #15 /* r2 = High addr bits from PC */;\
cmp r2, #0 ;\
bne 10f /* Jump to slow handler */;\
2021-07-31 00:20:18 +02:00
ldr r2, [reg_base, #RDMAP_OFF] /* r2 = read_mem[0] */;\
exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\
restore_flags() ;\
add pc, lr, #4 ;\
;\
ld_ewram_##load_type: /* EWRAM area */;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #EWRAM_OFF ;\
exec_ld_op_##load_type(18) /* Clear upper bits (18 LSB) */;\
add pc, lr, #4 ;\
;\
ld_iwram_##load_type: /* IWRAM area */;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #(IWRAM_OFF+0x8000) ;\
exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\
add pc, lr, #4 ;\
;\
ld_ioram_##load_type: /* I/O RAM area */;\
add r2, reg_base, #IOREG_OFF ;\
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
add pc, lr, #4 ;\
;\
ld_palram_##load_type: /* Palette RAM area */;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #PAL_RAM_OFF ;\
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
add pc, lr, #4 ;\
;\
ld_oamram_##load_type: /* OAM RAM area */;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #OAM_RAM_OFF ;\
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
add pc, lr, #4 ;\
;\
/* ROM area (or VRAM): uses generic memory handlers */ ;\
ld_rdmap_##load_type: ;\
2021-07-31 00:20:18 +02:00
add r2, reg_base, #RDMAP_OFF /* r2 = memory_map_read */;\
mov r1, r0, lsr #15 /* r1 = page index of address */;\
ldr r2, [r2, r1, lsl #2] /* r2 = base addr */;\
;\
exec_ld_op_##load_type(15) /* Pages are 32KB big */;\
add pc, lr, #4 ;\
;\
/* Slow load path, for open/unmapped loads */;\
ld_slow_##load_type: ;\
save_flags() ;\
ldr r1, [lr] /* r1 = PC */;\
10: ;\
str r1, [reg_base, #REG_PC] /* update PC */;\
call_c_function(load_function) ;\
restore_flags() ;\
add pc, lr, #4 /* return */;\
2021-07-31 00:20:18 +02:00
#define load_table_gen(load_type) ;\
2021-10-23 23:59:51 +02:00
.long ld_slow_##load_type /* -1 (for regions above F) */;\
2021-07-31 00:20:18 +02:00
.long ld_bios_##load_type /* 0 BIOS */;\
.long ld_slow_##load_type /* 1 Bad region */;\
.long ld_ewram_##load_type /* 2 EWRAM */;\
.long ld_iwram_##load_type /* 3 IWRAM */;\
.long ld_ioram_##load_type /* 4 I/O */;\
.long ld_palram_##load_type /* 5 Palette RAM, via map */;\
.long ld_rdmap_##load_type /* 6 VRAM area */;\
.long ld_oamram_##load_type /* 7 OAM RAM */;\
.long ld_rdmap_##load_type /* 8 ROM, via map */;\
.long ld_rdmap_##load_type /* 9 ROM, via map */;\
.long ld_rdmap_##load_type /* A ROM, via map */;\
.long ld_rdmap_##load_type /* B ROM, via map */;\
.long ld_rdmap_##load_type /* C ROM, via map */;\
.long ld_slow_##load_type /* D ROM or EEPROM/FLASH */;\
.long ld_slow_##load_type /* E EEPROM/FLASH */;\
.long ld_slow_##load_type /* F Bad region */;\
.pool
2021-07-31 00:20:18 +02:00
execute_load_builder(u8, 0, read_memory8, 4)
execute_load_builder(s8, 0, read_memory8s, 5)
execute_load_builder(u16, 1, read_memory16, 6)
execute_load_builder(s16, 1, read_memory16s, 7)
execute_load_builder(u32, 2, read_memory32, 8)
.data
.align 4
defsymbl(ldst_handler_functions)
store_lookup_table(8)
store_lookup_table(16)
store_lookup_table(32)
store_lookup_table(32_safe)
load_table_gen(u8)
load_table_gen(s8)
load_table_gen(u16)
load_table_gen(s16)
load_table_gen(u32)
.bss
2021-07-31 00:20:18 +02:00
.align 4
defsymbl(iwram)
.space 0x10000
defsymbl(vram)
.space 0x18000
defsymbl(ewram)
.space 0x80000
2021-07-31 00:20:18 +02:00
defsymbl(reg)
.space 0x100
defsymbl(spsr)
2021-03-18 01:18:39 +01:00
.space 24
2021-07-31 00:20:18 +02:00
@ Place lookup tables here for easy access via base_reg too
defsymbl(ldst_lookup_tables)
2021-10-23 23:59:51 +02:00
.space 4*17*4 @ store
.space 5*17*4 @ loads
.space 132 @ Padding for alignment
defsymbl(reg_mode)
.space 196
.space 60 @ More padding!
defsymbl(oam_ram)
.space 0x400
defsymbl(palette_ram)
.space 0x400
2021-07-31 00:20:18 +02:00
defsymbl(memory_map_read)
.space 0x8000
defsymbl(io_registers)
.space 0x400
2021-07-31 00:20:18 +02:00
defsymbl(palette_ram_converted)
.space 0x400
@ Vita and 3DS (and of course mmap) map their own cache sections through some
@ platform-speficic mechanisms.
#if !defined(HAVE_MMAP) && !defined(VITA) && !defined(_3DS)
@ Make this section executable!
.text
.section .jit,"awx",%nobits
.align 4
defsymbl(rom_translation_cache)
.space ROM_TRANSLATION_CACHE_SIZE
.size rom_translation_cache, .-rom_translation_cache
defsymbl(ram_translation_cache)
.space RAM_TRANSLATION_CACHE_SIZE
.size ram_translation_cache, .-ram_translation_cache
#endif