* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
* Decouple Status#local? from uri being nil
* Replace on-the-fly URI generation with stored URIs
- Generate URI in after_save hook for local statuses
- Use static value in TagManager when available, fallback to tag format
- Make TagManager use ActivityPub::TagManager to understand new format
- Adjust tests
* Use other heuristic for locality of old statuses, do not perform long query
* Exclude tombstone stream entries from Atom feed
* Prevent nil statuses from landing in Pubsubhubbub::DistributionWorker
* Fix URI not being saved (#4818)
* Add more specs for Status
* Save generated uri immediately
and also fix method order to minimize diff.
* Fix alternate HTML URL in Atom
* Fix tests
* Remove not-null constraint from statuses migration to speed it up
* Make PreviewCard records reuseable between statuses
**Warning!** Migration truncates preview_cards tablec
* Allow a wider thumbnail for link preview, display it in horizontal layout (#4648)
* Delete preview cards files before truncating
* Rename old table instead of truncating it
* Add mastodon:maintenance:remove_deprecated_preview_cards
* Ignore deprecated_preview_cards in schema definition
* Fix null behaviour
* Allow multiple pinned statuses to be shown and make them be ordered by pinned date
* Set timestamps NOT NULL
* Make single-line pinned_statuses
* Spec for pinned_statuses
* Remove redundant empty line
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Sort results by the name
* Switch search method to simple `LIKE` matching instead of tsvector/tsquery
Previously we used scores from ts_rank_cd() to sort results, but it didn't work
because the function returns same score for all results. It's not for calculate
similarity of single words. Sometimes this bug even push out exact matching tag
from results.
Additionally, PostgreSQL supports prefix searching with standard btree index.
Using it offers simpler code, but also less index size and some speed.
Since Rails 5.1 missing migration version results in following error:
```
StandardError: Directly inheriting from ActiveRecord::Migration is not supported. Please specify the Rails release the migration was written for:
```
This PR fixes all migration files.
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Adding account domain blocks that filter notifications and public timelines
* Add tests for domain blocks in notifications, public timelines
Filter reblogs of blocked domains from home
* Add API for listing and creating account domain blocks
* API for creating/deleting domain blocks, tests for Status#ancestors
and Status#descendants, filter domain blocks from them
* Filter domains in streaming API
* Update account_domain_block_spec.rb
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Fix conversation migration
* More spec coverage for status before_create
* Prevent n+1 query when generating Atom with the new conversations
* Improve code style
* Remove redundant local variable
* Naive approached to timeline filtering
* Convert allowed_languages into a db column
* Allow users to choose languages to see statuses in
* Style list items as two columns
* Add a hint to explain language filtering preference
* OEmbed support for PreviewCard
* Improve ProviderDiscovery code failure treatment
* Do not crawl links if there is a content warning, since those
don't display a link card anyway
* Reset db schema
* Fresh migrate
* Fix rubocop style issues
Fix#1681 - return existing access token when applicable instead of creating new
* Fix test
* Extract http client to helper
* Improve oembed controller
* Fixes#1985
- add migration AddMediaAttachmentMeta, which add meta field to media_attachments
- before saving attachment, set file meta if needed
- add meta in api
* add spec
* align the “size” format for image and video
* fix code climate
* fixes media_attachment_spec.rb
* Add a ReportFilter class
* Add reports and targeted_reports relationships to Account
* Use ReportFilter from admin/reports controller
* Link to admin/reports filtered views from admin account show view
* Add indexes to reports.account_id and reports.target_account_id
* Add language detection via WhatLanguage and (de)serialization of it through Atom
* Fix default language in ProcessFeedService
* Re-add newline before 'react-rails' Gem to fix groupings
Fixes Code Climate issue
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
aschmitz
Eugen Rochko
nullkal
takayamaki
Colin Mitchell
Akihiko Odaki
Sorin Davidoi
unarist
Matt Jankowski
René Klačan
Shunsuke Michii
alpaca-tc
Francis Chong
Hiroe Jun
Keiji, Yoshimi
Patrick Figel