milis/rootfs/lib/services/init-functions

1577 lines
55 KiB
Bash
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/sh
########################################################################
#
# Begin /lib/services/init-funtions
#
# Description : Run Level Control Functions
#
# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
# : DJ Lucas - dj@linuxfromscratch.org
# Update : Bruce Dubbs - bdubbs@linuxfromscratch.org
# : Thierry Nuttens - tnut@nutyx.org
# : milisarge@gmail.com
# Version : LFS 7.0
# : milis
#
# Notes : With code based on Matthias Benkmann's simpleinit-msb
# http://winterdrache.de/linux/newboot/index.html
#
# The file should be located in /lib/lsb, means
# a symbolic link to service folder is done
#
########################################################################
## Environmental setup
# Setup default values for environment
umask 022
export PATH="/usr/bin:/bin:/usr/sbin:/sbin"
## Screen Dimensions
# Find current screen size
if [ -z "${COLUMNS}" ]; then
COLUMNS=$(stty size)
COLUMNS=${COLUMNS##* }
fi
# When using remote connections, such as a serial port, stty size returns 0
if [ "${COLUMNS}" = "0" ]; then
COLUMNS=80
fi
## Measurements for positioning result messages
COL=$((${COLUMNS} - 12))
WCOL=$((${COL} - 2))
## Set Cursor Position Commands, used via echo
SET_COL="\\033[${COL}G" # at the $COL char
SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
CURS_ZERO="\\033[0G"
## Set color commands, used via echo
# Please consult `man console_codes for more information
# under the "ECMA-48 Set Graphics Rendition" section
#
# Warning: when switching from a 8bit to a 9bit font,
# the linux console will reinterpret the bold (1;) to
# the top 256 glyphs of the 9bit font. This does
# not affect framebuffer consoles
NORMAL="\\033[0;39m" # Standard console grey
SUCCESS="\\033[1;32m" # Success is green
WARNING="\\033[1;33m" # Warnings are yellow
FAILURE="\\033[1;31m" # Failures are red
INFO="\\033[1;36m" # Information is light cyan
BRACKET="\\033[1;34m" # Brackets are blue
# Use a colored prefix
BMPREFIX=" "
SUCCESS_PREFIX="${SUCCESS} * ${NORMAL}"
FAILURE_PREFIX="${FAILURE}*****${NORMAL}"
WARNING_PREFIX="${WARNING} *** ${NORMAL}"
SUCCESS_SUFFIX="${BRACKET}[${SUCCESS} TAMAM ${BRACKET}]${NORMAL}"
FAILURE_SUFFIX="${BRACKET}[${FAILURE} BASARISIZ ${BRACKET}]${NORMAL}"
WARNING_SUFFIX="${BRACKET}[${WARNING} UYARI ${BRACKET}]${NORMAL}"
BOOTLOG=/run/bootlog
KILLDELAY=0
[ "$verbose" == "no" ] && echo "" > $BOOTLOG
# Set any user specified environment variables e.g. HEADLESS
[ -r /etc/sysconfig/rc.site ] && . /etc/sysconfig/rc.site
################################################################################
# start_daemon() #
# Usage: start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args...] #
# #
# Purpose: This runs the specified program as a daemon #
# #
# Inputs: -f: (force) run the program even if it is already running. #
# -n nicelevel: specify a nice level. See 'man nice(1)'. #
# -p pidfile: use the specified file to determine PIDs. #
# pathname: the complete path to the specified program #
# args: additional arguments passed to the program (pathname) #
# #
# Return values (as defined by LSB exit codes): #
# 0 - program is running or service is OK #
# 1 - generic or unspecified error #
# 2 - invalid or excessive argument(s) #
# 5 - program is not installed #
################################################################################
start_daemon()
{
local force=""
local nice="0"
local pidfile=""
local pidlist=""
local retval=""
# Process arguments
while true
do
case "${1}" in
-f)
force="1"
shift 1
;;
-n)
nice="${2}"
shift 2
;;
-p)
pidfile="${2}"
shift 2
;;
-*)
return 2
;;
*)
program="${1}"
break
;;
esac
done
# Check for a valid program
if [ ! -e "${program}" ]; then return 5; fi
# Execute
if [ -z "${force}" ]; then
if [ -z "${pidfile}" ]; then
# Determine the pid by discovery
pidlist=`pidofproc "${1}"`
retval="${?}"
else
# The PID file contains the needed PIDs
# Note that by LSB requirement, the path must be given to pidofproc,
# however, it is not used by the current implementation or standard.
pidlist=`pidofproc -p "${pidfile}" "${1}"`
retval="${?}"
fi
# Return a value ONLY
# It is the init script's (or distribution's functions) responsibilty
# to log messages!
case "${retval}" in
0)
# Program is already running correctly, this is a
# successful start.
return 0
;;
1)
# Program is not running, but an invalid pid file exists
# remove the pid file and continue
rm -f "${pidfile}"
;;
3)
# Program is not running and no pidfile exists
# do nothing here, let start_deamon continue.
;;
*)
# Others as returned by status values shall not be interpreted
# and returned as an unspecified error.
return 1
;;
esac
fi
# Do the start!
nice -n "${nice}" "${@}"
}
################################################################################
# killproc() #
# Usage: killproc [-p pidfile] pathname [signal] #
# #
# Purpose: Send control signals to running processes #
# #
# Inputs: -p pidfile, uses the specified pidfile #
# pathname, pathname to the specified program #
# signal, send this signal to pathname #
# #
# Return values (as defined by LSB exit codes): #
# 0 - program (pathname) has stopped/is already stopped or a #
# running program has been sent specified signal and stopped #
# successfully #
# 1 - generic or unspecified error #
# 2 - invalid or excessive argument(s) #
# 5 - program is not installed #
# 7 - program is not running and a signal was supplied #
################################################################################
killproc()
{
local pidfile
local program
local prefix
local progname
local signal="-TERM"
local fallback="-KILL"
local nosig
local pidlist
local retval
local pid
local delay="30"
local piddead
local dtime
# Process arguments
while true; do
case "${1}" in
-p)
pidfile="${2}"
shift 2
;;
*)
program="${1}"
if [ -n "${2}" ]; then
signal="${2}"
fallback=""
else
nosig=1
fi
# Error on additional arguments
if [ -n "${3}" ]; then
return 2
else
break
fi
;;
esac
done
# Check for a valid program
if [ ! -e "${program}" ]; then return 5; fi
# Check for a valid signal
check_signal "${signal}"
if [ "${?}" -ne "0" ]; then return 2; fi
# Get a list of pids
if [ -z "${pidfile}" ]; then
# determine the pid by discovery
pidlist=`pidofproc "${1}"`
retval="${?}"
else
# The PID file contains the needed PIDs
# Note that by LSB requirement, the path must be given to pidofproc,
# however, it is not used by the current implementation or standard.
pidlist=`pidofproc -p "${pidfile}" "${1}"`
retval="${?}"
fi
# Return a value ONLY
# It is the init script's (or distribution's functions) responsibilty
# to log messages!
case "${retval}" in
0)
# Program is running correctly
# Do nothing here, let killproc continue.
;;
1)
# Program is not running, but an invalid pid file exists
# Remove the pid file.
rm -f "${pidfile}"
# This is only a success if no signal was passed.
if [ -n "${nosig}" ]; then
return 0
else
return 7
fi
;;
3)
# Program is not running and no pidfile exists
# This is only a success if no signal was passed.
if [ -n "${nosig}" ]; then
return 0
else
return 7
fi
;;
*)
# Others as returned by status values shall not be interpreted
# and returned as an unspecified error.
return 1
;;
esac
# Perform different actions for exit signals and control signals
check_sig_type "${signal}"
if [ "${?}" -eq "0" ]; then # Signal is used to terminate the program
# Account for empty pidlist (pid file still exists and no
# signal was given)
if [ "${pidlist}" != "" ]; then
# Kill the list of pids
for pid in ${pidlist}; do
kill -0 "${pid}" 2> /dev/null
if [ "${?}" -ne "0" ]; then
# Process is dead, continue to next and assume all is well
continue
else
kill "${signal}" "${pid}" 2> /dev/null
# Wait up to ${delay}/10 seconds to for "${pid}" to
# terminate in 10ths of a second
while [ "${delay}" -ne "0" ]; do
kill -0 "${pid}" 2> /dev/null || piddead="1"
if [ "${piddead}" = "1" ]; then break; fi
sleep 0.1
delay="$(( ${delay} - 1 ))"
done
# If a fallback is set, and program is still running, then
# use the fallback
if [ -n "${fallback}" -a "${piddead}" != "1" ]; then
kill "${fallback}" "${pid}" 2> /dev/null
sleep 1
# Check again, and fail if still running
kill -0 "${pid}" 2> /dev/null && return 1
fi
fi
done
fi
# Check for and remove stale PID files.
if [ -z "${pidfile}" ]; then
# Find the basename of $program
prefix=`echo "${program}" | sed 's/[^/]*$//'`
progname=`echo "${program}" | sed "s@${prefix}@@"`
if [ -e "/var/run/${progname}.pid" ]; then
rm -f "/var/run/${progname}.pid" 2> /dev/null
fi
else
if [ -e "${pidfile}" ]; then rm -f "${pidfile}" 2> /dev/null; fi
fi
# For signals that do not expect a program to exit, simply
# let kill do its job, and evaluate kill's return for value
else # check_sig_type - signal is not used to terminate program
for pid in ${pidlist}; do
kill "${signal}" "${pid}"
if [ "${?}" -ne "0" ]; then return 1; fi
done
fi
}
################################################################################
# pidofproc() #
# Usage: pidofproc [-p pidfile] pathname #
# #
# Purpose: This function returns one or more pid(s) for a particular daemon #
# #
# Inputs: -p pidfile, use the specified pidfile instead of pidof #
# pathname, path to the specified program #
# #
# Return values (as defined by LSB status codes): #
# 0 - Success (PIDs to stdout) #
# 1 - Program is dead, PID file still exists (remaining PIDs output) #
# 3 - Program is not running (no output) #
################################################################################
pidofproc()
{
local pidfile
local program
local prefix
local progname
local pidlist
local lpids
local exitstatus="0"
# Process arguments
while true; do
case "${1}" in
-p)
pidfile="${2}"
shift 2
;;
*)
program="${1}"
if [ -n "${2}" ]; then
# Too many arguments
# Since this is status, return unknown
return 4
else
break
fi
;;
esac
done
# If a PID file is not specified, try and find one.
if [ -z "${pidfile}" ]; then
# Get the program's basename
prefix=`echo "${program}" | sed 's/[^/]*$//'`
if [ -z "${prefix}" ]; then
progname="${program}"
else
progname=`echo "${program}" | sed "s@${prefix}@@"`
fi
# If a PID file exists with that name, assume that is it.
if [ -e "/var/run/${progname}.pid" ]; then
pidfile="/var/run/${progname}.pid"
fi
fi
# If a PID file is set and exists, use it.
if [ -n "${pidfile}" -a -e "${pidfile}" ]; then
# Use the value in the first line of the pidfile
pidlist=`/bin/head -n1 "${pidfile}"`
# This can optionally be written as 'sed 1q' to repalce 'head -n1'
# should LFS move /bin/head to /usr/bin/head
else
# Use pidof
pidlist=`pidof "${program}"`
fi
# Figure out if all listed PIDs are running.
for pid in ${pidlist}; do
kill -0 ${pid} 2> /dev/null
if [ "${?}" -eq "0" ]; then
lpids="${lpids}${pid} "
else
exitstatus="1"
fi
done
if [ -z "${lpids}" -a ! -f "${pidfile}" ]; then
return 3
else
echo "${lpids}"
return "${exitstatus}"
fi
}
################################################################################
# statusproc() #
# Usage: statusproc [-p pidfile] pathname #
# #
# Purpose: This function prints the status of a particular daemon to stdout #
# #
# Inputs: -p pidfile, use the specified pidfile instead of pidof #
# pathname, path to the specified program #
# #
# Return values: #
# 0 - Status printed #
# 1 - Input error. The daemon to check was not specified. #
################################################################################
statusproc()
{
local pidfile
local pidlist
if [ "${#}" = "0" ]; then
echo "Usage: statusproc [-p pidfle] {program}"
exit 1
fi
# Process arguments
while true; do
case "${1}" in
-p)
pidfile="${2}"
shift 2
;;
*)
if [ -n "${2}" ]; then
echo "Too many arguments"
return 1
else
break
fi
;;
esac
done
if [ -n "${pidfile}" ]; then
pidlist=`pidofproc -p "${pidfile}" $@`
else
pidlist=`pidofproc $@`
fi
# Trim trailing blanks
pidlist=`echo "${pidlist}" | sed -r 's/ +$//'`
base="${1##*/}"
if [ -n "${pidlist}" ]; then
/bin/echo -e "${INFO}${base} is running with Process" \
"ID(s) ${pidlist}.${NORMAL}"
else
if [ -n "${base}" -a -e "/var/run/${base}.pid" ]; then
/bin/echo -e "${WARNING}${1} is not running but" \
"/var/run/${base}.pid exists.${NORMAL}"
else
if [ -n "${pidfile}" -a -e "${pidfile}" ]; then
/bin/echo -e "${WARNING}${1} is not running" \
"but ${pidfile} exists.${NORMAL}"
else
/bin/echo -e "${INFO}${1} is not running.${NORMAL}"
fi
fi
fi
}
################################################################################
# timespec() #
# #
# Purpose: An internal utility function to format a timestamp #
# a boot log file. Sets the STAMP variable. #
# #
# Return value: Not used #
################################################################################
timespec()
{
STAMP="$(echo `date +"%b %d %T %:z"` `hostname`) "
return 0
}
################################################################################
# log_success_msg() #
# Usage: log_success_msg ["message"] #
# #
# Purpose: Print a successful status message to the screen and #
# a boot log file. #
# #
# Inputs: $@ - Message #
# #
# Return values: Not used #
################################################################################
log_success_msg()
{
if [ "$verbose" == "no" ]; then
return 0
fi
/bin/echo -n -e "${BMPREFIX}${@}"
/bin/echo -e "${CURS_ZERO}${SUCCESS_PREFIX}${SET_COL}${SUCCESS_SUFFIX}"
# Strip non-printable characters from log file
logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'`
timespec
/bin/echo -e "${STAMP} ${logmessage} OK" >> ${BOOTLOG}
return 0
}
log_success_msg2()
{
if [ "$verbose" == "no" ]; then
return 0
fi
/bin/echo -n -e "${BMPREFIX}${@}"
/bin/echo -e "${CURS_ZERO}${SUCCESS_PREFIX}${SET_COL}${SUCCESS_SUFFIX}"
echo " OK" >> ${BOOTLOG}
return 0
}
################################################################################
# log_failure_msg() #
# Usage: log_failure_msg ["message"] #
# #
# Purpose: Print a failure status message to the screen and #
# a boot log file. #
# #
# Inputs: $@ - Message #
# #
# Return values: Not used #
################################################################################
log_failure_msg()
{
/bin/echo -n -e "${BMPREFIX}${@}"
/bin/echo -e "${CURS_ZERO}${FAILURE_PREFIX}${SET_COL}${FAILURE_SUFFIX}"
# Strip non-printable characters from log file
timespec
logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'`
/bin/echo -e "${STAMP} ${logmessage} BAŞARISIZ" >> ${BOOTLOG}
return 0
}
log_failure_msg2()
{
/bin/echo -n -e "${BMPREFIX}${@}"
/bin/echo -e "${CURS_ZERO}${FAILURE_PREFIX}${SET_COL}${FAILURE_SUFFIX}"
echo "BAŞARISIZ" >> ${BOOTLOG}
return 0
}
################################################################################
# log_warning_msg() #
# Usage: log_warning_msg ["message"] #
# #
# Purpose: Print a warning status message to the screen and #
# a boot log file. #
# #
# Return values: Not used #
################################################################################
log_warning_msg()
{
/bin/echo -n -e "${BMPREFIX}${@}"
/bin/echo -e "${CURS_ZERO}${WARNING_PREFIX}${SET_COL}${WARNING_SUFFIX}"
# Strip non-printable characters from log file
logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'`
timespec
/bin/echo -e "${STAMP} ${logmessage} UYARI" >> ${BOOTLOG}
return 0
}
################################################################################
# log_info_msg() #
# Usage: log_info_msg message #
# #
# Purpose: Print an information message to the screen and #
# a boot log file. Does not print a trailing newline character. #
# #
# Return values: Not used #
################################################################################
log_info_msg()
{
if [ "$verbose" == "no" ]; then
return 0
fi
/bin/echo -n -e "${BMPREFIX}${@}"
# Strip non-printable characters from log file
logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'`
timespec
/bin/echo -n -e "${STAMP} ${logmessage}" >> ${BOOTLOG}
return 0
}
log_info_msg2()
{
if [ "$verbose" == "no" ] ; then
return 0
fi
/bin/echo -n -e "${@}"
# Strip non-printable characters from log file
logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'`
/bin/echo -n -e "${logmessage}" >> ${BOOTLOG}
return 0
}
################################################################################
# evaluate_retval() #
# Usage: Evaluate a return value and print success or failyure as appropriate #
# #
# Purpose: Convenience function to terminate an info message #
# #
# Return values: Not used #
################################################################################
evaluate_retval()
{
local error_value="${?}"
if [ ${error_value} = 0 ]; then
if [ "$verbose" != "no" ]; then
log_success_msg2
fi
else
log_failure_msg2
fi
}
################################################################################
# check_signal() #
# Usage: check_signal [ -{signal} | {signal} ] #
# #
# Purpose: Check for a valid signal. This is not defined by any LSB draft, #
# however, it is required to check the signals to determine if the #
# signals chosen are invalid arguments to the other functions. #
# #
# Inputs: Accepts a single string value in the form or -{signal} or {signal} #
# #
# Return values: #
# 0 - Success (signal is valid #
# 1 - Signal is not valid #
################################################################################
check_signal()
{
local valsig
# Add error handling for invalid signals
valsig="-ALRM -HUP -INT -KILL -PIPE -POLL -PROF -TERM -USR1 -USR2"
valsig="${valsig} -VTALRM -STKFLT -PWR -WINCH -CHLD -URG -TSTP -TTIN"
valsig="${valsig} -TTOU -STOP -CONT -ABRT -FPE -ILL -QUIT -SEGV -TRAP"
valsig="${valsig} -SYS -EMT -BUS -XCPU -XFSZ -0 -1 -2 -3 -4 -5 -6 -8 -9"
valsig="${valsig} -11 -13 -14 -15"
echo "${valsig}" | grep -- " ${1} " > /dev/null
if [ "${?}" -eq "0" ]; then
return 0
else
return 1
fi
}
################################################################################
# check_sig_type() #
# Usage: check_signal [ -{signal} | {signal} ] #
# #
# Purpose: Check if signal is a program termination signal or a control signal #
# This is not defined by any LSB draft, however, it is required to #
# check the signals to determine if they are intended to end a #
# program or simply to control it. #
# #
# Inputs: Accepts a single string value in the form or -{signal} or {signal} #
# #
# Return values: #
# 0 - Signal is used for program termination #
# 1 - Signal is used for program control #
################################################################################
check_sig_type()
{
local valsig
# The list of termination signals (limited to generally used items)
valsig="-ALRM -INT -KILL -TERM -PWR -STOP -ABRT -QUIT -2 -3 -6 -9 -14 -15"
echo "${valsig}" | grep -- " ${1} " > /dev/null
if [ "${?}" -eq "0" ]; then
return 0
else
return 1
fi
}
################################################################################
# wait_for_user() #
# #
# Purpose: Wait for the user to respond if not a headless system #
# #
################################################################################
wait_for_user()
{
# Wait for the user by default
[ "${HEADLESS=0}" = "0" ] && read ENTER
return 0
}
################################################################################
# is_true() #
# #
# Purpose: Utility to test if a variable is true | yes | 1 #
# #
################################################################################
is_true()
{
[ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] || [ "$1" = "y" ] ||
[ "$1" = "t" ]
}
################################################################################
# create_files() #
# #
# Purpose: create files from ${name}, ${maj}, ${min}, ${usr}, ${grp}, ${perm} #
# ${type} ${dtype} #
################################################################################
create_files()
{
# Input to file descriptor 9 and output to stdin (redirection)
exec 9>&0 < /etc/sysconfig/createfiles
while read name type perm usr grp dtype maj min junk
do
# Ignore comments and blank lines.
case "${name}" in
""|\#*) continue ;;
esac
# Ignore existing files.
if [ ! -e "${name}" ]; then
# Create stuff based on its type.
case "${type}" in
dir)
mkdir "${name}"
;;
file)
:> "${name}"
;;
dev)
case "${dtype}" in
char)
mknod "${name}" c ${maj} ${min}
;;
block)
mknod "${name}" b ${maj} ${min}
;;
pipe)
mknod "${name}" p
;;
*)
log_warning_msg "\nUnknown device type: ${dtype}"
;;
esac
;;
*)
log_warning_msg "\nUnknown type: ${type}"
continue
;;
esac
fi
# Set up the permissions, too even if it exist allready
chown ${usr}:${grp} "${name}"
chmod ${perm} "${name}"
done
# Close file descriptor 9 (end redirection)
exec 0>&9 9>&-
return 0
}
################################################################################
# do_mount_virtualfs() #
# #
# Purpose: first mounting process, all the virtual system must be mounted #
# prior anything #
# #
################################################################################
do_mount_virtualfs()
{
if ! mountpoint /run >/dev/null; then
mount /run || failed=1
fi
mkdir -p /run/lock /run/shm
chmod 1777 /run/shm
log_info_msg "Mounting virtual file systems: ${INFO}/run"
if ! mountpoint /proc >/dev/null; then
log_info_msg2 " ${INFO}/proc"
mount -o nosuid,noexec,nodev /proc || failed=1
fi
if ! mountpoint /sys >/dev/null; then
log_info_msg2 " ${INFO}/sys"
mount -o nosuid,noexec,nodev /sys || failed=1
fi
if ! mountpoint /dev >/dev/null; then
log_info_msg2 " ${INFO}/dev"
mount -o mode=0755,nosuid /dev || failed=1
fi
ln -sfn /run/shm /dev/shm
(exit ${failed})
evaluate_retval
}
################################################################################
# do_start_localnet() do_stop_localnet() #
# #
# Purpose: Sets the hostname of the machine and starts the #
# loopback interface. #
################################################################################
do_start_localnet()
{
[ -r /etc/sysconfig/network ] && . /etc/sysconfig/network
[ -r /etc/hostname ] && HOSTNAME=`cat /etc/hostname`
log_info_msg "Bringing up the loopback interface..."
ip addr add 127.0.0.1/8 label lo dev lo
ip link set lo up
evaluate_retval
log_info_msg "Setting hostname to ${HOSTNAME}..."
hostname ${HOSTNAME}
evaluate_retval
}
do_stop_localnet()
{
log_info_msg "Bringing down the loopback interface..."
ip link set lo down
evaluate_retval
}
################################################################################
# do_load_modules() #
# #
# Purpose: Module auto-loading function #
# #
################################################################################
do_load_modules()
{
# Assure that the kernel has module support.
[ -e /proc/modules ] || return 0
for FILE in /etc/sysconfig/modules /etc/sysconfig/modules.d/*.conf
do
[ ! -f $FILE ] && continue
# Continue with next if there's no modules file or there are no
# valid entries
[ -r $FILE ] || continue
egrep -qv '^($|#)' $FILE || continue
log_info_msg "Loading modules:"
break
done
for FILE in /etc/sysconfig/modules /etc/sysconfig/modules.d/*.conf
do
[ ! -f $FILE ] && continue
[ -r $FILE ] || continue
egrep -qv '^($|#)' $FILE || continue
while read module args; do
# Ignore comments and blank lines.
case "$module" in
""|"#"*) continue ;;
esac
# Attempt to load the module, passing any arguments provided.
modprobe ${module} ${args} >/dev/null
# Print the module name if successful, otherwise take note.
if [ $? -eq 0 ]; then
log_info_msg2 " ${module}"
else
failedmod="${failedmod} ${module}"
fi
done < $FILE
done
# fi
# Print a message about successfully loaded modules on the correct line.
log_success_msg2
# Print a failure message with a list of any modules that
# may have failed to load.
if [ -n "${failedmod}" ]; then
log_failure_msg "Failed to load modules:${failedmod}"
fi
return 0
}
################################################################################
# do_start_udev do_stop_udev #
# #
# Purpose: Udev cold-plugging start and shutdown functions #
# #
################################################################################
do_start_udev()
{
log_info_msg "Populating /dev with device nodes... "
if ! grep -q '[[:space:]]sysfs' /proc/mounts; then
log_failure_msg2
msg="FAILURE:\n\nUnable to create "
msg="${msg}devices without a SysFS filesystem\n\n"
msg="${msg}After you press Enter, this system "
msg="${msg}will be halted and powered off.\n\n"
log_info_msg "$msg"
log_info_msg "Press Enter to continue..."
wait_for_user
/etc/rc.d/init.d/halt stop
fi
# Udev handles uevents itself, so we don't need to have
# the kernel call out to any binary in response to them
[ -f /proc/sys/kernel/hotplug ] && echo > /proc/sys/kernel/hotplug
# Start the udev daemon to continually watch for, and act on,
# uevents
/sbin/udevd --daemon --resolve-names=never
# Now traverse /sys in order to "coldplug" devices that have
# already been discovered
/sbin/udevadm trigger --action=add --type=subsystems
/sbin/udevadm trigger --action=add --type=devices
/sbin/udevadm trigger --action=change --type=devices
# Now wait for udevd to process the uevents we triggered
if ! is_true "$OMIT_UDEV_SETTLE"; then
/sbin/udevadm settle
fi
# If any LVM based partitions are on the system, ensure they
# are activated so they can be used.
if [ -x /sbin/vgchange ]; then /sbin/vgchange -a y >/dev/null; fi
log_success_msg2
}
do_stop_udev()
{
udevadm control --exit
udevadm info --cleanup-db
}
################################################################################
# do_start_clock() do_stop_clock() #
# #
# Purpose: On boot, system time is obtained from hwclock. The #
# hardware clock can also be set on shutdown. #
################################################################################
do_start_clock()
{
[ -r /etc/sysconfig/clock ] && . /etc/sysconfig/clock
case "${UTC}" in
yes|true|1)
CLOCKPARAMS="${CLOCKPARAMS} --utc"
CLOCKMODE="utc"
;;
no|false|0)
CLOCKPARAMS="${CLOCKPARAMS} --localtime"
CLOCKMODE="localtime"
;;
esac
hwclock --hctosys ${CLOCKPARAMS} >/dev/null
log_info_msg "Setting hardware clock to ${CLOCKMODE}..."
evaluate_retval
}
do_stop_clock()
{
log_info_msg "Setting hardware clock..."
hwclock --systohc ${CLOCKPARAMS} >/dev/null
evaluate_retval
}
################################################################################
# do_start_checkfs() #
# #
# Purpose: Checks local filesystmes before mounting. #
# #
################################################################################
do_start_checkfs()
{
if [ -f /fastboot ]; then
msg="/fastboot found, will omit "
msg="${msg} file system checks as requested.\n"
log_info_msg "${msg}"
return 0
fi
log_info_msg "Mounting root file system in read-only mode... "
mount -n -o remount,ro / >/dev/null
if [ ${?} != 0 ]; then
log_failure_msg2
msg="\n\nCannot check root "
msg="${msg}filesystem because it could not be mounted "
msg="${msg}in read-only mode.\n\n"
msg="${msg}After you press Enter, this system will be "
msg="${msg}halted and powered off.\n\n"
log_failure_msg "${msg}"
log_info_msg "Press Enter to continue..."
wait_for_user
/etc/rc.d/init.d/halt stop
else
log_success_msg2
fi
if [ -f /forcefsck ]; then
msg="\n/forcefsck found, forcing file"
msg="${msg} system checks as requested."
log_success_msg "$msg"
options="-f"
else
options=""
fi
log_info_msg "Checking file systems..."
# Note: -a option used to be -p; but this fails e.g. on fsck.minix
if is_true "$VERBOSE_FSCK"; then
fsck ${options} -a -A -C -T
else
fsck ${options} -a -A -C -T >/dev/null
fi
error_value=${?}
if [ "${error_value}" = 0 ]; then
log_success_msg2
fi
if [ "${error_value}" = 1 ]; then
msg="\nWARNING:\n\nFile system errors "
msg="${msg}were found and have been corrected.\n"
msg="${msg}You may want to double-check that "
msg="${msg}everything was fixed properly."
log_warning_msg "$msg"
fi
if [ "${error_value}" = 2 -o "${error_value}" = 3 ]; then
msg="\nWARNING:\n\nFile system errors "
msg="${msg}were found and have been been "
msg="${msg}corrected, but the nature of the "
msg="${msg}errors require this system to be rebooted.\n\n"
msg="${msg}After you press enter, "
msg="${msg}this system will be rebooted\n\n"
log_failure_msg "$msg"
log_info_msg "Press Enter to continue..."
wait_for_user
reboot -f
fi
if [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then
msg="\nFAILURE:\n\nFile system errors "
msg="${msg}were encountered that could not be "
msg="${msg}fixed automatically. This system "
msg="${msg}cannot continue to boot and will "
msg="${msg}therefore be halted until those "
msg="${msg}errors are fixed manually by a "
msg="${msg}System Administrator.\n\n"
msg="${msg}After you press Enter, this system will be "
msg="${msg}halted and powered off.\n\n"
log_failure_msg "$msg"
log_info_msg "Press Enter to continue..."
wait_for_user
/etc/rc.d/init.d/halt stop
fi
if [ "${error_value}" -ge 16 ]; then
msg="\nFAILURE:\n\nUnexpected Failure "
msg="${msg}running fsck. Exited with error "
msg="${msg} code: ${error_value}."
log_failure_msg $msg
return ${error_value}
fi
return 0
}
do_start_mountfs()
{
log_info_msg "Remounting root file system in read-write mode..."
mount -o remount,rw / >/dev/null
evaluate_retval
# Remove fsck-related file system watermarks.
rm -f /fastboot /forcefsck
# Make sure /dev/pts exists
mkdir -p /dev/pts
# This will mount all filesystems that do not have _netdev in
# their option list. _netdev denotes a network filesystem.
log_info_msg "Mounting remaining file systems..."
mount -a -O no_netdev >/dev/null
evaluate_retval
return $failed
}
do_stop_mountfs()
{
# Don't unmount virtual file systems like /run
log_info_msg "Unmounting all other currently mounted file systems..."
umount -a -d -r -t notmpfs,nosysfs,nodevtmpfs,noproc,nodevpts >/dev/null
evaluate_retval
# Make sure / is mounted read only (umount bug)
log_info_msg "Remonting root file system in read-only mode..."
mount -o remount,ro /
evaluate_retval
# Make all LVM volume groups unavailable, if appropriate
# This fails if swap or / are on an LVM partition
#if [ -x /sbin/vgchange ]; then /sbin/vgchange -an > /dev/null; fi
}
do_start_cleanfs()
{
log_info_msg "Cleaning file systems:"
if [ "${SKIPTMPCLEAN}" = "" ]; then
log_info_msg2 " /tmp"
chmod 1777 /tmp
cd /tmp &&
find . -xdev -mindepth 1 ! -name lost+found -delete || failed=1
fi
> /var/run/utmp
if grep -q '^utmp:' /etc/group ; then
chmod 664 /var/run/utmp
chgrp utmp /var/run/utmp
fi
(return ${failed})
evaluate_retval
if egrep -qv '^(#|$)' /etc/sysconfig/createfiles 2>/dev/null; then
log_info_msg "Creating files and directories... "
create_files # Always returns 0
evaluate_retval
fi
return $failed
}
###############################################################################
# do_start_udev_retry() #
# Description: Replays any failed uevents that were skipped due to #
# slow hardware initialization, and creates those needed #
# device nodes #
###############################################################################
do_start_udev_retry()
{
log_info_msg "Retrying failed uevents, if any..."
# As of udev-186, the --run option is no longer valid
#rundir=$(/sbin/udevadm info --run)
rundir=/run/udev
# From Debian: "copy the rules generated before / was mounted
# read-write":
for file in ${rundir}/tmp-rules--*; do
dest=${file##*tmp-rules--}
[ "$dest" = '*' ] && break
cat $file >> /etc/udev/rules.d/$dest
rm -f $file
done
# Re-trigger the uevents that may have failed,
# in hope they will succeed now
/bin/sed -e 's/#.*$//' /etc/sysconfig/udev_retry | /bin/grep -v '^$' | \
while read line ; do
for subsystem in $line ; do
/sbin/udevadm trigger --subsystem-match=$subsystem --action=add
done
done
# Now wait for udevd to process the uevents we triggered
if ! is_true "$OMIT_UDEV_RETRY_SETTLE"; then
/sbin/udevadm settle
fi
evaluate_retval
}
################################################################################
# do_start_swap() do_stop_swap() #
# #
# Description: Mounts and unmounts swap partitions defined in #
# /etc/fstab. #
################################################################################
do_start_swap()
{
log_info_msg "Activating all swap files/partitions..."
swapon -a
evaluate_retval
}
do_stop_swap()
{
log_info_msg "Deactivating all swap files/partitions..."
swapoff -a
evaluate_retval
}
do_start_console()
{
failed=0
[ -r /etc/sysconfig/console ] && . /etc/sysconfig/console
# See if we need to do anything
if [ -z "${KEYMAP}" ] && [ -z "${KEYMAP_CORRECTIONS}" ] &&
[ -z "${FONT}" ] && [ -z "${LEGACY_CHARSET}" ] &&
! is_true "${UNICODE}"; then
return 0
fi
# There should be no bogus failures below this line!
log_info_msg "Setting up Linux console..."
# Figure out if a framebuffer console is used
[ -d /sys/class/graphics/fb0 ] && use_fb=1 || use_fb=0
# Figure out the command to set the console into the
# desired mode
is_true "${UNICODE}" &&
MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" ||
MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a"
# On framebuffer consoles, font has to be set for each vt in
# UTF-8 mode. This doesn't hurt in non-UTF-8 mode also.
! is_true "${use_fb}" || [ -z "${FONT}" ] ||
MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}"
# Apply that command to all consoles mentioned in
# /etc/inittab. Important: in the UTF-8 mode this should
# happen before setfont, otherwise a kernel bug will
# show up and the unicode map of the font will not be
# used.
for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab |
grep -o '\btty[[:digit:]]*\b'`
do
openvt -f -w -c ${TTY#tty} -- \
/bin/sh -c "${MODE_COMMAND}" || failed=1
done
# Set the font (if not already set above) and the keymap
[ "${use_fb}" == "1" ] || [ -z "${FONT}" ] || setfont $FONT || failed=1
[ -z "${KEYMAP}" ] ||
loadkeys ${KEYMAP} >/dev/null 2>&1 ||
failed=1
[ -z "${KEYMAP_CORRECTIONS}" ] ||
loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 ||
failed=1
# Convert the keymap from $LEGACY_CHARSET to UTF-8
[ -z "$LEGACY_CHARSET" ] ||
dumpkeys -c "$LEGACY_CHARSET" | loadkeys -u >/dev/null 2>&1 ||
failed=1
# If any of the commands above failed, the trap at the
# top would set $failed to 1
( return $failed )
evaluate_retval
return $failed
}
################################################################################
# do_start_sysctl() #
# #
# Description : File uses /etc/sysctl.conf to set kernel runtime #
# #
################################################################################
do_start_sysctl()
{
if [ -f "/etc/sysctl.conf" ]; then
log_info_msg "Setting kernel runtime parameters..."
sysctl -q -p
evaluate_retval
fi
}
################################################################################
# bolumleri_bagla() #
# #
# Description : disk bolumlerinin otomatik baglanması #
# #
################################################################################
bolumleri_bagla()
{
if [ -f /usr/bin/devmon ]; then
devmon --internal 2>&1 > /tmp/devmon.log &
fi
}
################################################################################
# klavye_ayar() #
# #
# Description : klavye ayarlama #
# #
################################################################################
klavye_ayar()
{
#turkce klavye
loadkeys trq
}
################################################################################
# do_start_network() #
# #
# Description: Start the network depending on what's available nothing, wicd #
# or networkmanager #
# #
################################################################################
do_config_network()
{
NETWORKCONFIG_FILE="/etc/sysconfig/network"
if [ ! -f /etc/sysconfig/network ]; then
cat > ${NETWORKCONFIG_FILE} << "EOF"
HOSTNAME='milis'
MANAGER='cli'
EOF
fi
# Network configuration
. ${NETWORKCONFIG_FILE}
NM_PIDFILE="/var/run/NetworkManager.pid"
WICD_PIDFILE="/var/run/wicd/wicd.pid"
if [ "${MANAGER}" == "" ]; then
MANAGER="cli"
if [ -f /usr/sbin/NetworkManager ]; then
MANAGER="networkmanager"
fi
if [ -f /usr/bin/wicd ]; then
MANAGER="wicd"
fi
fi
}
do_start_network()
{
do_config_network
case "${MANAGER}" in
networkmanager)
if [ -f /usr/sbin/NetworkManager ]; then
if [ ! -d /var/run/NetworkManager ]; then
install -d -o root -g root -m 755 /var/run/NetworkManager
fi
log_info_msg "Starting NetworkManager daemon..."
start_daemon /usr/sbin/NetworkManager
if [ "${NETWORKWAIT}" == "yes" ]; then
[ -z "${LINKDELAY}" ] && LINKDELAY=10
log_info_msg "Waiting for network..."
nm-online -q --timeout=$LINKDELAY || nm-online -q -x --timeout=30
[ "$?" = "0" ] && log_success_msg "Network startup" || log_failure_msg "Network startup"
[ -n "${NETWORKDELAY}" ] && /bin/sleep ${NETWORKDELAY}
fi
else
echo "the package networkmanager seems not to be install"
echo "check the ${NETWORKCONFIG_FILE} file"
fi
;;
wicd)
if [ -f /usr/bin/wicd ]; then
if [ -e $WICD_PIDFILE ]; then
echo "Wicd appears to already be running"
echo "If this is NOT the case, then remove"
echo "$WICD_PIDFILE, check the ${NETWORKCONFIG_FILE} file"
echo "and try again"
else
log_info_msg "Baslatiliyor the wicd Daemon..."
start_daemon /usr/bin/wicd 1>/dev/null
evaluate_retval
if grep -v ^# /etc/fstab | grep _netdev > /dev/null; then
while ! grep "nameserver" /etc/resolv.conf ;
do
if [ $NETWORKDELAY -gt 0 ]; then
sleep 1
echo -n .
let NETWORKDELAY=$NETWORKDELAY-1
if [ $NETWORKDELAY -lt 1 ]; then
log_failure_msg2 "Time out"
exit 1
fi
fi
done
log_success_msg2 "Ag duzgun ayarlandi..."
fi
fi
else
echo "the package wicd seems not to be install"
echo "check the ${NETWORKCONFIG_FILE} file"
fi
;;
cli)
# Start all network interfaces
for file in /etc/sysconfig/ifconfig.*
do
interface=${file##*/ifconfig.}
# Skip if $file is * (because nothing was found)
if [ "${interface}" = "*" ]; then
continue
fi
if [ -f /etc/wpa_supplicant.conf.${interface} ] && [ -x /sbin/wpa_supplicant ]; then
wpa_supplicant -B -c/etc/wpa_supplicant.conf.${interface} -i${interface} \
-P /var/run/wpa_supplicant.${interface}
sleep 2
fi
/sbin/ifup ${interface}
done
;;
esac
}
do_stop_network()
{
do_config_network
case "${MANAGER}" in
networkmanager)
if [ -f /usr/sbin/NetworkManager ]; then
log_info_msg "Stopping NetworkManager daemon..."
killproc /usr/sbin/NetworkManager
else
echo "the package networkmanager seems not to be install"
echo "check the ${NETWORKCONFIG_FILE} file"
fi
;;
wicd)
if [ -e $WICD_PIDFILE ]; then
log_info_msg "Stopping the wicd Daemon..."
wicd-cli -xyz 1>/dev/null
kill $(cat $WICD_PIDFILE)
evaluate_retval
else
echo "wicd appears not to be running..."
echo "check the ${NETWORKCONFIG_FILE} file"
fi
;;
cli)
# Reverse list
net_files=""
for file in /etc/sysconfig/ifconfig.*
do
net_files="${file} ${net_files}"
done
# Stop all network interfaces
for file in ${net_files}
do
interface=${file##*/ifconfig.}
# Skip if $file is * (because nothing was found)
if [ "${interface}" = "*" ]; then
continue
fi
/sbin/ifdown ${interface}
if [ -f /var/run/wpa_supplicant.${interface} ]; then
kill `cat /var/run/wpa_supplicant.${interface}`
fi
done
;;
esac
}
################################################################################
# print_file_system() #
# #
# Purpose: printout the file system of the partition passed as argument #
# #
# Return value: #
# - the file system name #
# - "no" if not found #
################################################################################
print_file_system() {
local PI FS
PI=`/sbin/blkid ${1}`
for param in $PI; do
case $param in TYPE=*)
FS=`echo ${param#TYPE=}|sed s/\"//g`;;
esac
done
if [ "$FS" == "" ]; then
echo "no"
else
echo $FS
fi
}
# End /lib/services/init-functions