milislinux
/
milis
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
milis/bin/eski/install-houaphan

1654 lines
43 KiB
Plaintext
Raw Normal View History

malfs mekanizma guncelleme
2016-02-24 01:27:23 +01:00
#*******************************************************************************
# Written by Thierry Nuttens
# Copyright Thierry Nuttens 2010-2011-2012-2013-2014-2015-2016
# Installation script for the NuTyX system
# Based on LFS scripts
#*******************************************************************************
# Function - boot_mesg()
#
# Purpose: Sending information from bootup scripts to the console
#
# Inputs: $1 is the message
# $2 is the colorcode for the console
#
# Outputs: Standard Output
#
# Dependencies: - sed for parsing strings.
# - grep for counting string length.
#
# Todo:
#*******************************************************************************
boot_mesg() {
local ECHOPARM=""
while true
do
case "${1}" in
-n)
ECHOPARM=" -n "
shift 1
;;
-*)
echo "Unknown Option: ${1}"
return 1
;;
*)
break
;;
esac
done
## Figure out the length of what is to be printed to be used
## for warning messages.
STRING_LENGTH=$((${#1} + 1))
# Print the message to the screen
${ECHO} ${ECHOPARM} -e "${2}${1}"
}
boot_mesg_flush() {
# Reset STRING_LENGTH for next message
STRING_LENGTH="0"
}
boot_log() {
# Left in for backwards compatibility
:
}
echo_ok() {
${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]"
${ECHO} -e "${NORMAL}"
boot_mesg_flush
}
echo_info() {
${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${INFO} INFO ${BRACKET}]"
${ECHO} -e "${NORMAL}"
boot_mesg_flush
}
echo_failure() {
${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]"
${ECHO} -e "${NORMAL}"
boot_mesg_flush
}
echo_warning() {
${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]"
${ECHO} -e "${NORMAL}"
boot_mesg_flush
}
print_error_msg() {
echo_failure
ERREUR="yes"
# $i is inherited by the rc script
boot_mesg -n " FAILURE:\n\n You should not read this error.\n\n" ${FAILURE}
boot_mesg -n " It means something went wrong with the installation"
boot_mesg -n " of ${i} "
boot_mesg_flush
boot_mesg -n " Thanks to inform us"
boot_mesg -n " via the website http://www.nutyx.org."
boot_mesg " Thanks again for your collaboration.\n"
boot_mesg_flush
boot_mesg -n "Press Enter to continue..." ${INFO}
boot_mesg "" ${NORMAL}
read ENTER
end
exit 1
}
#*******************************************************************************
# Function - log_success_msg "message"
#
# Purpose: Print a success message
#
# Inputs: $@ - Message
#
# Outputs: Text output to screen
#
# Dependencies: echo
#
# Todo: logging
#
#*******************************************************************************
log_success_msg() {
${ECHO} -n -e "${BOOTMESG_PREFIX}${@}"
${ECHO} -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK
""${BRACKET}""]""${NORMAL}"
return 0
}
#*******************************************************************************
# Function - log_failure_msg "message"
#
# Purpose: Print a failure message
#
# Inputs: $@ - Message
#
# Outputs: Text output to screen
#
# Dependencies: echo
#
# Todo: logging
#
#*******************************************************************************
log_failure_msg() {
${ECHO} -n -e "${BOOTMESG_PREFIX}${@}"
${ECHO} -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL
""${BRACKET}""]""${NORMAL}"
return 0
}
#*******************************************************************************
# Function - log_warning_msg "message"
#
# Purpose: print a warning message
#
# Inputs: $@ - Message
#
# Outputs: Text output to screen
#
# Dependencies: echo
#
# Todo: logging
#
#*******************************************************************************
log_warning_msg() {
${ECHO} -n -e "${BOOTMESG_PREFIX}${@}"
${ECHO} -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN
""${BRACKET}""]""${NORMAL}"
return 0
}
#*******************************************************************************
# Function - unmountall
#
# Purpose: unmount all the mounted disks and partitions
#
# Inputs: $1 the full path of the Distro
#
# Outputs: Standard Output
#
# Dependencies: chroot
#
#*******************************************************************************
unmountall() {
if [ -d "$DEPOT_CD/depot" ]; then
umount ${{FOLDER}/${DEPOT}
umount `cat /tmp/depot`
fi
umount ${FOLDER}/run
umount ${FOLDER}/dev/pts
umount ${FOLDER}/dev
umount ${FOLDER}/proc
umount ${FOLDER}/sys
}
#*******************************************************************************
# Function - setup_chroot
#
# Purpose: Enter the NuTyX Distribution
#
# Inputs: $1 the full path of the Distro
#
# Outputs: Standard Output
#
# Dependencies: chroot
#
#*******************************************************************************
setup_chroot() {
cp /etc/resolv.conf ${FOLDER}/etc/resolv.conf
mount --bind /dev ${FOLDER}/dev
mount -t devpts devpts ${FOLDER}/dev/pts
mount -t proc proc ${FOLDER}/proc
mount -t sysfs sysfs ${FOLDER}/sys
mount -t tmpfs tmpfs ${FOLDER}/run
if [ -h ${FOLDER}/dev/shm ]; then
mkdir -p ${FOLDER}/$(readlink ${FOLDER}/dev/shm)
fi
}
enter_chroot() {
echo "
******************************
Chroot path: $DEVICE
******************************"
chroot ${FOLDER} /usr/bin/env -i \
HOME=/root \
TERM="$TERM" \
PS1='\u:\w\$ ' \
/bin/bash --login
}
#*******************************************************************************
# Function - install_pkg()
#
# Purpose: Install the selected package
#
# Inputs: $1 is the package
# $2 is the group
# $3 Option to install, normally nothing except for grub
# Outputs: Standard Output
#
# Dependencies: - wget
# - boot_mesg
# - pkgadd
# Todo:
#*******************************************************************************
install_pkg() {
if $TMP/usr/bin/pkginfo -r $FOLDER -i| grep "^$1 " > /dev/null; then
boot_mesg "$1 is already install on $DEVICE..."
echo_info
else
packagefileToDownload=`getPackageName ${1}`
boot_mesg "Downloading $1..."
wget ${DEPOT_BASE}/${1}/$packagefileToDownload -O $TMP/$packagefileToDownload > /dev/null 2>&1
echo_info
# Installing the package
$TMP/usr/bin/pkgadd -r $FOLDER -i $packagefileToDownload || print_error_msg
echo_ok
fi
}
#*******************************************************************************
# Function Check_DiskSpace
#
# Purpose: Check the Available space after the using amont
# Inputs: $1: Mount point
# $2: Amount in Kbytes going to be used
#
# Return: status: 0 when ok
# 1 not ok
# Todo:
#*******************************************************************************
check_diskspace() {
# df|grep "$1"|awk '{print $4}'
let MinSize=$2+100
let Amoung=`df|grep $FOLDER |awk '{print $(NF-2)}'`/1024 || exit 1
let Amoung=$Amoung-$MinSize
status="0"
if [ $Amoung -lt 0 ]; then
echo "Not enough space for the installation"
echo_failure
status="1"
else
echo "Space remind after install: $Amoung Mbytes"
echo_info
fi
if [ $status == "1" ]; then
check_availablespace $1
echo "The installation needs $BaseInstall Mbytes minimum"
end
exit 1
fi
}
#*******************************************************************************
# Function check_availablespace
#
# Purpose: Printout the Available space on the Mount point
#
# Inputs: $1: Mount point
#
# Output: Standard Output
#
# Todo:
#*******************************************************************************
check_availablespace() {
let TotAmoung=`df|grep "$1"|awk '{print $4}'`/1024 || exit 1
echo "You have at the moment: ${TotAmoung} Mbytes on the destination disk"
}
error() {
echo ""
echo " $1"
echo ""
rm -rf $TMP
exit 1
}
end() {
if [ "$ERREUR" == "yes" ]; then
if [ ! -f $TMP/depot ]; then
rm -r ${FOLDER}/${DEPOT}
boot_mesg "Cleaning up temporary files.."
boot_mesg "Please correct and start again"
fi
fi
cd ~
unmountall $FOLDER > /dev/null 2>&1
rm -rf $TMP
}
#****************************************************************************
# Function expect
#
# Purpose: Check that the answer is nothing else then the supply
# arguments
# Inputs: $1: answer 1
# $2: answer 2
# $3: The question to ask
#
# Output: Standard Output
#
#****************************************************************************
expect(){
# echo -n "$3"
# read answer
while [ "$answer" != "o" ] && [ "$answer" != "n" ]; do
echo -n "$3"
read answer
done
}
#****************************************************************************
# Function getPackageName
#
# Purpose: Get the fullname of the package
# directory
# Inputs: $1 is the package name
#
# Output: fullname of the archive without url
# something like: cpio1414074943i686.cards.tar.xz
#****************************************************************************
getPackageName() {
local BUILD_DATE EXT HEAD
wget ${DEPOT_BASE}/${1}/.PKGREPO -O $TMP/.PKGREPO > /dev/null 2>&1
HEAD=`head -1 $TMP/.PKGREPO`
if [ "${HEAD:10:1}" == "#" ]; then
BUILD_DATE="`echo $HEAD|cut -d "#" -f1`"
EXT="`echo $HEAD|cut -d "#" -f2`"
echo "${1}${BUILD_DATE}${ARCH}${EXT}"
fi
}
install_base() {
for i in \
nutyx acl attr bash bc binutils bzip2 coreutils curl \
diffutils expat file findutils flex gcc gdbm \
gettext glibc gmp gperf grep gzip inetutils kbd lzo \
libarchive libcap libpipeline mpc mpfr ncurses openssl pam \
procps-ng psmisc readline sed shadow util-linux xz zlib \
cards
do
install_pkg "$i"
done
}
generate_blfs_bootscripts() {
[ -f ${FOLDER}/etc/${FOLDER}/etc/blfs-bootscripts ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
echo "scripts=blfs-bootscripts
scriptsversion=20150924" > ${FOLDER}/etc/blfs-bootscripts
}
generate_etc_bashrc() {
local FILE
FILE="bashrc"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/bashrc
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>
# updated by Bruce Dubbs <bdubbs@linuxfromscratch.org>
# System wide aliases and functions.
# System wide environment variables and startup programs should go into
# /etc/profile. Personal environment variables and startup programs
# should go into ~/.bash_profile. Personal aliases and functions should
# go into ~/.bashrc
# Provides a colored /bin/ls command. Used in conjunction with code in
# /etc/profile.
alias ls='ls --color=auto'
# Provides prompt for non-login shells, specifically shells started
# in the X environment. [Review the LFS archive thread titled
# PS1 Environment Variable for a great case study behind this script
# addendum.]
NORMAL="\[\e[0m\]"
RED="\[\e[1;31m\]"
GREEN="\[\e[1;32m\]"
WHITE="\[\e[1;37m\]"
INFOMACHINE="`date +%H:%M` `uname -m` `uname -r` `whoami`@`uname -n`"
prompt_command() {
# Sauvegarde de la pos courante
tput sc
# Calcul de la largeur
let backwash=$(tput cols)-$(echo $INFOMACHINE | wc -m)-2
# Pos des curseurs à la position Y=0, X=longueur calculée
tput cup 0 ${backwash}
# Spécifie la couleur et la casse de la police
tput setaf 4; tput bold
# Affiche le chemin entre crochets
echo -n "["
# Specifie la couleur du chemin
tput setaf 6
# Affiche le chemin complet
echo -n "$INFOMACHINE"
tput setaf 4; tput bold
# Affiche le crochet fermé
echo -n "]"
# Remet le curseur à sa place
tput rc
}
PROMPT_COMMAND=prompt_command
case $TERM in
xterm|rxvt*)
TITLEBAR='\[\033]0;\u@\h \007\]'
;;
*)
TITLEBAR=''
;;
esac
if [[ $EUID == 0 ]] ; then
PS1="$TITLEBAR$RED\u [ $NORMAL\w$RED ]# $NORMAL"
else
PS1="$TITLEBAR$GREEN\u [ $NORMAL\w$GREEN ]\$ $NORMAL"
fi
# End /etc/bashrc
EOF
}
generate_rc_site() {
local FILE
FILE="rc.site"
[ -f ${FOLDER}/etc/sysconfig/$FILE ] && return
[ ! -d ${FOLDER}/etc/sysconfig ] && mkdir -pv ${FOLDER}/etc/sysconfig
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/sysconfig/$FILE
return
fi
cat > ${FOLDER}/etc/sysconfig/$FILE << "EOF"
# rc.site [20:15 i686 3.18.11-NuTyX-iso thierry@nutyx]
# Optional parameters for boot scripts.
# Distro Information
# These values, if specified here, override the defaults
#DISTRO="Linux From Scratch" # The distro name
#DISTRO_CONTACT="lfs-dev@linuxfromscratch.org" # Bug report address
#DISTRO_MINI="LFS" # Short name used in filenames for distro config
# Define custom colors used in messages printed to the screen
# Please consult `man console_codes` for more information
# under the "ECMA-48 Set Graphics Rendition" section
#
# Warning: when switching from a 8bit to a 9bit font,
# the linux console will reinterpret the bold (1;) to
# the top 256 glyphs of the 9bit font. This does
# not affect framebuffer consoles
# These values, if specified here, override the defaults
#BRACKET="\\033[1;34m" # Blue
#FAILURE="\\033[1;31m" # Red
#INFO="\\033[1;36m" # Cyan
#NORMAL="\\033[0;39m" # Grey
#SUCCESS="\\033[1;32m" # Green
#WARNING="\\033[1;33m" # Yellow
# Use a colored prefix
# These values, if specified here, override the defaults
#BMPREFIX=" "
#SUCCESS_PREFIX="${SUCCESS} * ${NORMAL}"
#FAILURE_PREFIX="${FAILURE}*****${NORMAL}"
#WARNING_PREFIX="${WARNING} *** ${NORMAL}"
# Interactive startup
#IPROMPT="yes" # Whether to display the interactive boot prompt
#itime="3" # The amount of time (in seconds) to display the prompt
# The total length of the distro welcome string, without escape codes
#wlen=$(echo "Welcome to ${DISTRO}" | wc -c )
#welcome_message="Welcome to ${INFO}${DISTRO}${NORMAL}"
# The total length of the interactive string, without escape codes
#ilen=$(echo "Press 'I' to enter interactive startup" | wc -c )
#i_message="Press '${FAILURE}I${NORMAL}' to enter interactive startup"
# Set scripts to skip the file system check on reboot
#FASTBOOT=yes
# Skip reading from the console
#HEADLESS=yes
# Write out fsck progress if yes
#VERBOSE_FSCK=no
# Speed up boot without waiting for settle in udev
#OMIT_UDEV_SETTLE=y
# Speed up boot without waiting for settle in udev_retry
#OMIT_UDEV_RETRY_SETTLE=yes
# Skip cleaning /tmp if yes
#SKIPTMPCLEAN=no
# For setclock
#UTC=1
#CLOCKPARAMS=
# For consolelog
#LOGLEVEL=5
# For network
#HOSTNAME=mylfs
# Delay between TERM and KILL signals at shutdown
#KILLDELAY=3
# Optional sysklogd parameters
#SYSKLOGD_PARMS="-m 0"
# Console parameters
#UNICODE=1
#KEYMAP="de-latin1"
#KEYMAP_CORRECTIONS="euro2"
#FONT="lat0-16 -m 8859-15"
#LEGACY_CHARSET=
EOF
}
generate_udev_retry() {
local FILE
FILE="udev_retry"
[ -f ${FOLDER}/etc/sysconfig/$FILE ] && return
[ ! -d ${FOLDER}/etc/sysconfig ] && mkdir -pv ${FOLDER}/etc/sysconfig
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/sysconfig/$FILE \
${FOLDER}/etc/sysconfig/$FILE
return
fi
cat > ${FOLDER}/etc/sysconfig/$FILE << "EOF"
########################################################################
# Begin /etc/sysconfig/udev_retry
#
# Description : udev_retry script configuration
#
# Authors :
#
# Version : 00.00
#
# Notes : Each subsystem that may need to be re-triggered after mountfs
# runs should be listed in this file. Probable subsystems to be
# listed here are rtc (due to /var/lib/hwclock/adjtime) and sound
# (due to both /var/lib/alsa/asound.state and /usr/sbin/alsactl).
# Entries are whitespace-separated.
########################################################################
rtc
# End /etc/sysconfig/udev_retry
EOF
}
generate_createfiles() {
local FILE
FILE="createfiles"
[ -f ${FOLDER}/etc/sysconfig/$FILE ] && return
[ ! -d ${FOLDER}/etc/sysconfig ] && mkdir -pv ${FOLDER}/etc/sysconfig
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/sysconfig/$FILE
return
fi
cat > ${FOLDER}/etc/sysconfig/$FILE << "EOF"
########################################################################
# Begin /etc/sysconfig/createfiles
#
# Description : Createfiles script config file
#
# Authors :
#
# Version : 00.00
#
# Notes : The syntax of this file is as follows:
# if type is equal to "file" or "dir"
# <filename> <type> <permissions> <user> <group>
# if type is equal to "dev"
# <filename> <type> <permissions> <user> <group> <devtype>
# <major> <minor>
#
# <filename> is the name of the file which is to be created
# <type> is either file, dir, or dev.
# file creates a new file
# dir creates a new directory
# dev creates a new device
# <devtype> is either block, char or pipe
# block creates a block device
# char creates a character deivce
# pipe creates a pipe, this will ignore the <major> and
# <minor> fields
# <major> and <minor> are the major and minor numbers used for
# the device.
########################################################################
# End /etc/sysconfig/createfiles
EOF
}
generate_modules() {
local FILE
FILE="modules"
[ -f ${FOLDER}/etc/sysconfig/$FILE ] && return
[ ! -d ${FOLDER}/etc/sysconfig ] && mkdir -pv ${FOLDER}/etc/sysconfig
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/sysconfig/$FILE
return
fi
cat > ${FOLDER}/etc/sysconfig/$FILE << "EOF"
########################################################################
# Begin /etc/sysconfig/modules
#
# Description : Module auto-loading configuration
#
# Authors :
#
# Version : 00.00
#
# Notes : The syntax of this file is as follows:
# <module> [<arg1> <arg2> ...]
#
# Each module should be on its own line, and any options that you want
# passed to the module should follow it. The line deliminator is either
# a space or a tab.
########################################################################
# End /etc/sysconfig/modules
EOF
}
generate_mouse() {
local FILE
FILE="mouse"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc/sysconfig ] && mkdir -pv ${FOLDER}/etc/sysconfig
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/sysconfig/$FILE
return
fi
cat > ${FOLDER}/etc/sysconfig/$FILE << "EOF"
MDEVICE="/dev/input/mice"
PROTOCOL="imps2"
EOF
}
generate_inputrc() {
local FILE
FILE="inputrc"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/inputrc
# Modified by Chris Lynn <roryo@roryo.dynup.net>
# Allow the command prompt to wrap to the next line
set horizontal-scroll-mode Off
# Enable 8bit input
set meta-flag On
set input-meta On
# Turns off 8th bit stripping
set convert-meta Off
# Keep the 8th bit for display
set output-meta On
# none, visible or audible
set bell-style none
# All of the following map the escape sequence of the value
# contained in the 1st argument to the readline specific functions
"\eOd": backward-word
"\eOc": forward-word
# for linux console
"\e[1~": beginning-of-line
"\e[4~": end-of-line
"\e[5~": beginning-of-history
"\e[6~": end-of-history
"\e[3~": delete-char
"\e[2~": quoted-insert
# for xorg-term
"\eOH": beginning-of-line
"\eOF": end-of-line
# for Konsole
"\e[H": beginning-of-line
"\e[F": end-of-line
# End /etc/inputrc
EOF
}
generate_hosts() {
local FILE
FILE="hosts"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/hosts
127.0.0.1 localhost.localdomain localhost
127.0.0.1 nutyx
# End /etc/hosts
EOF
}
generate_shells() {
local FILE
FILE="shells"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/shells
/bin/sh
/bin/bash
# End /etc/shells
EOF
}
generate_umask_sh() {
local FILE
FILE="umask.sh"
[ -f ${FOLDER}/etc/profile.d/$FILE ] && return
[ ! -d ${FOLDER}/etc/profile.d ] && mkdir -pv ${FOLDER}/etc/profile.d
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/profile.d/$FILE
return
fi
cat > ${FOLDER}/etc/profile.d/$FILE << "EOF"
# By default we want the umask to get set.
if [ "$(id -gn)" = "$(id -un)" -a $EUID -gt 99 ] ; then
umask 002
else
umask 022
fi
EOF
}
generate_readline_sh() {
local FILE
FILE="readline.sh"
[ -f ${FOLDER}/etc/profile.d/$FILE ] && return
[ ! -d ${FOLDER}/etc/profile.d ] && mkdir -pv ${FOLDER}/etc/profile.d
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/profile.d/$FILE
return
fi
cat > ${FOLDER}/etc/profile.d/$FILE << "EOF"
# Setup the INPUTRC environment variable.
if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ] ; then
INPUTRC=/etc/inputrc
fi
export INPUTRC
EOF
}
generate_extrapaths_sh() {
local FILE
FILE="extrapaths.sh"
[ -f ${FOLDER}/etc/profile.d/$FILE ] && return
[ ! -d ${FOLDER}/etc/profile.d ] && mkdir -pv ${FOLDER}/etc/profile.d
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/profile.d/$FILE
return
fi
cat > ${FOLDER}/etc/profile.d/$FILE << "EOF"
if [ -d /usr/local/lib/pkgconfig ] ; then
pathappend /usr/local/lib/pkgconfig PKG_CONFIG_PATH
fi
if [ -d /usr/local/bin ]; then
pathprepend /usr/local/bin
fi
if [ -d /usr/local/sbin -a $EUID -eq 0 ]; then
pathprepend /usr/local/sbin
fi
if [ -d ~/bin ]; then
pathprepend ~/bin
fi
#if [ $EUID -gt 99 ]; then
# pathappend .
#fi
EOF
}
generate_dircolors_sh() {
local FILE
FILE="dircolors.sh"
[ -f ${FOLDER}/etc/profile.d/$FILE ] && return
[ ! -d ${FOLDER}/etc/profile.d ] && mkdir -pv ${FOLDER}/etc/profile.d
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/profile.d/$FILE
return
fi
cat > ${FOLDER}/etc/profile.d/$FILE << "EOF"
# Setup for /bin/ls to support color, the alias is in /etc/bashrc.
if [ -f "/etc/dircolors" ] ; then
eval $(dircolors -b /etc/dircolors)
if [ -f "$HOME/.dircolors" ] ; then
eval $(dircolors -b $HOME/.dircolors)
fi
fi
alias ls='ls --color=auto'
EOF
}
generate_profile() {
local FILE
FILE="profile"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/profile
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>
# modifications by Dagmar d'Surreal <rivyqntzne@pbzpnfg.arg>
# System wide environment variables and startup programs.
# System wide aliases and functions should go in /etc/bashrc. Personal
# environment variables and startup programs should go into
# ~/.bash_profile. Personal aliases and functions should go into
# ~/.bashrc.
# Functions to help us manage paths. Second argument is the name of the
# path variable to be modified (default: PATH)
pathremove () {
local IFS=':'
local NEWPATH
local DIR
local PATHVARIABLE=${2:-PATH}
for DIR in ${!PATHVARIABLE} ; do
if [ "$DIR" != "$1" ] ; then
NEWPATH=${NEWPATH:+$NEWPATH:}$DIR
fi
done
export $PATHVARIABLE="$NEWPATH"
}
pathprepend () {
pathremove $1 $2
local PATHVARIABLE=${2:-PATH}
export $PATHVARIABLE="$1${!PATHVARIABLE:+:${!PATHVARIABLE}}"
}
pathappend () {
pathremove $1 $2
local PATHVARIABLE=${2:-PATH}
export $PATHVARIABLE="${!PATHVARIABLE:+${!PATHVARIABLE}:}$1"
}
export -f pathremove pathprepend pathappend
# Set the initial path
export PATH=/usr/bin:/bin:/usr/sbin:/sbin
if [ $EUID -eq 0 ] ; then
unset HISTFILE
fi
# Setup some environment variables.
export HISTSIZE=1000
export HISTIGNORE="&:[bf]g:exit"
# Set some defaults for graphical systems
export XDG_DATA_DIRS=/usr/share/
export XDG_CONFIG_DIRS=/etc/xdg/
# Setup a red prompt for root and a green one for users.
NORMAL="\[\e[0m\]"
RED="\[\e[1;31m\]"
GREEN="\[\e[1;32m\]"
if [[ $EUID == 0 ]] ; then
PS1="$RED\u [ $NORMAL\w$RED ]# $NORMAL"
else
PS1="$GREEN\u [ $NORMAL\w$GREEN ]\$ $NORMAL"
fi
for script in /etc/profile.d/*.sh ; do
if [ -r $script ] ; then
. $script
fi
done
unset script RED GREEN NORMAL
# End /etc/profile
EOF
}
generate_group() {
[ -f ${FOLDER}/etc/group ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
cat > ${FOLDER}/etc/group << "EOF"
root:x:0:
bin:x:1:
sys:x:2:
kmem:x:3:
tape:x:4:
tty:x:5:
daemon:x:6:
floppy:x:7:
disk:x:8:
lp:x:9:
dialout:x:10:
audio:x:11:gdm
video:x:12:gdm
utmp:x:13:
usb:x:14:
cdrom:x:15:
adm:x:16:
atd:x:17:
messagebus:x:18:
lpadmin:x:19:
named:x:20:
gdm:x:21:
fcron:x:22:
www:x:24:
apache:x:25:
smmsp:x:26:
polkitd:x:27:
wheel:x:30:root
exim:x:31:
postfix:x:32:
postdrop:x:33:
mail:x:34:
vmailman:x:35:
news:x:36:
kdm:x:37:
mysql:x:40:
postgres:x:41:
dovecot:x:42:
dovenull:x:43:
ftp:x:45:
proftpd:x:46:
vsftpd:x:47:
rsyncd:x:48:
sshd:x:50:
stunnel:x:51:
svn:x:56:
svntest:x:57:
pulse:x:58:
pulse-access:x:59:
games:x:60:
kvm:x:61:
wireshark:x:62:
lightdm:x:63:
sddm:x:64:
scanner:x:70:
colord:x:71:
vboxusers:x:80:
ldap:x:83:
avahi:x:84:
avahi-autoipd:x:85:
netdev:x:86:
ntp:x:87:
unbound:x:88:
nogroup:x:99:
users:x:999:
EOF
}
generate_passwd() {
[ -f ${FOLDER}/etc/passwd ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
cat > ${FOLDER}/etc/passwd << "EOF"
root::0:0:root:/root:/bin/bash
bin:x:1:1:bin:/dev/null:/bin/false
lp:x:9:9:Print Service User:/dev/null:/bin/false
atd:x:17:17:add daemon:/dev/null:/bin/false
messagebus:x:18:18:D-Bus Message Daemon User:/dev/null:/bin/false
named:x:20:20:BIND Owner:/home/named:/bin/false
gdm:x:21:21:GDM Daemon User:/var/lib/gdm:/bin/false
fcron:x:22:22:Fcron User:/dev/null:/bin/false
www:x:24:24:Nginx Server:/dev/null:bin/false
apache:x:25:25:Apache Server:/dev/null:/bin/false
smmsp:x:26:26:Sendmail Daemon:/dev/null:/bin/false
polkitd:x:27:27:Policy Kit Daemon User:/etc/polkit-1:/bin/false
exim:x:31:31:Exim Daemon:/dev/null:/bin/false
postfix:x:32:32:Postfix Daemon User:/var/spool/postfix:/bin/false
sendmail:x:34:34:Sendmail Daemon:/dev/null:/bin/false
vmailman:x:35:35:Vmail Daemon:/dev/null:/bin/false
news:x:36:36:News Daemon:/dev/null:/bin/false
kdm:x:37:37:KDM Daemon Owner:/var/lib/kdm:/bin/false
mysql:x:40:40:MySQL Server:/dev/null:/bin/false
postgres:x:41:41:PostgreSQL Server:/srv/pgsql/data:/bin/bash
dovecot:x:42:42:Dovecot unprivileged user:/dev/null:/bin/false
dovenull:x:43:43:Dovecot login user:/dev/null:/bin/false
ftp:x:45:45:anonymous_user:/home/ftp:/bin/false
proftpd:x:46:46:proftpd:/srv/ftp:/usr/bin/proftpdshell
vsftpd:x:47:47:vsftpd User:/dev/null:/bin/false
rsyncd:x:48:48:rsyncd Daemon:/home/rsync:/bin/false
sshd:x:50:50:sshd PrivSep:/var/lib/sshd:/bin/false
stunnel:x:51:51:stunnel Daemon:/var/lib/stunnel:/bin/false
svn:x:56:56:SVN Owner:/home/svn:/bin/false
games:x:60:60:Games High Score Owner:/var/games:/bin/false
lightdm:x:63:63:Light Display Manager:/var/lib/lightdm:/sbin/nologin
sddm:x:64:64:Simple Desktop Display Manager:/var/lib/sddm:/bin/false
colord:x:71:71:Color Daemon Owner:/var/lib/colord:/bin/false
ldap:x:83:83:OpenLDAP Daemon Owner:/var/lib/openldap:/bin/false
avahi:x:84:84:Avahi Daemon Owner:/var/run/avahi-daemon:/bin/false
avahi-autoipd:x:85:85:Avahi autoip Daemon:/:/var/run/avahi-autoipd:/bin/false
ntp:x:87:87:Network Time Protocol:/var/lib/ntp:/bin/false
unbound:x:88:88:Unbound DNS resolver:/var/lib/unbound:/bin/false
anonymous:x:98:99:Unprivileged User:/dev/null:/bin/false
nobody:x:99:99:Unprivileged User:/dev/null:/bin/false
EOF
}
generate_fstab() {
local FILE
FILE="fstab"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
cat > ${FOLDER}/etc/$FILE << "EOF"
# Begin /etc/fstab
# file system mount-point type options dump fsck
# order
# Exemple de montage nfs
# 192.168.254.254:/home/thierry /home/thierry nfs rw,vers=3,_netdev,rsize=8192,wsize=8192 0 0
proc /proc proc nosuid,noexec,nodev 0 0
sysfs /sys sysfs nosuid,noexec,nodev 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /run tmpfs defaults 0 0
devtmpfs /dev devtmpfs mode=0755,nosuid 0 0
EOF
}
generate_dmrc() {
local FILE
FILE=".dmrc"
[ -f ${FOLDER}/etc/skel/$FILE ] && return
[ ! -d ${FOLDER}/etc/skel ] && mkdir -pv ${FOLDER}/etc/skel
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/skel/$FILE
return
fi
cat > ${FOLDER}/etc/skel/$FILE << "EOF"
[Desktop]
Session=default
EOF
}
generate_bashrc() {
local FILE
FILE=".bashrc"
[ -f ${FOLDER}/etc/skel/$FILE ] && return
[ ! -d ${FOLDER}/etc/skel ] && mkdir -pv ${FOLDER}/etc/skel
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/skel/$FILE
return
fi
cat > ${FOLDER}/etc/skel/$FILE << "EOF"
# Personal aliases and functions.
# Personal environment variables and startup programs should go in
# ~/.bash_profile. System wide environment variables and startup
# programs are in /etc/profile. System wide aliases and functions are
# in /etc/bashrc.
if [ -f "/etc/bashrc" ] ; then
source /etc/bashrc
fi
if [ $EUID -eq 0 ] ; then
alias del='cards remove'
alias get='cards install'
alias up='cards install -u'
alias check='cards sync;cards diff'
else
alias del='sudo cards remove'
alias get='sudo cards install'
alias up='sudo cards install -u'
alias check='sudo cards sync;sudo cards diff'
fi
alias search='cards search'
alias ll='ls -l'
alias l='ls -alh'
alias duh='du -h --max-depth=1'
alias dfh='df -h'
alias pkgfind='cards list | grep -i'
# End ~/.bashrc
EOF
[ -f ${FOLDER}/root/$FILE ] && return
[ ! -d ${FOLDER}/root ] && install -dv -m0750 ${FOLDER}/root
cp -v ${FOLDER}/etc/skel/$FILE \
${FOLDER}/root
}
generate_bash_profile() {
local FILE
FILE=".bash_profile"
[ -f ${FOLDER}/etc/skel/$FILE ] && return
[ ! -d ${FOLDER}/etc/skel ] && mkdir -pv ${FOLDER}/etc/skel
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/skel/$FILE
return
fi
cat > ${FOLDER}/etc/skel/$FILE << "EOF"
# Personal environment variables and startup programs.
# Personal aliases and functions should go in ~/.bashrc. System wide
# environment variables and startup programs are in /etc/profile.
# System wide aliases and functions are in /etc/bashrc.
append () {
# First remove the directory
local IFS=':'
local NEWPATH
for DIR in $PATH; do
if [ "$DIR" != "$1" ]; then
NEWPATH=${NEWPATH:+$NEWPATH:}$DIR
fi
done
# Then append the directory
export PATH=$NEWPATH:$1
}
if [ -f "$HOME/.bashrc" ] ; then
source $HOME/.bashrc
fi
# unset append
# End ~/.bash_profile
EOF
[ ! -d ${FOLDER}/root ] && install -dv -m0750 ${FOLDER}/root
[ -f ${FOLDER}/root/$FILE ] && return
cp -v ${FOLDER}/etc/skel/$FILE \
${FOLDER}/root
}
generate_pkgmk_conf() {
local FILE
FILE="pkgmk.conf"
[ -f ${FOLDER}/etc/$FILE ] && return
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
fi
}
generate_cards_conf() {
local FILE
FILE="cards.conf"
[ -f ${FOLDER}/etc/$FILE ] && return
[ ! -d ${FOLDER}/etc ] && mkdir -pv ${FOLDER}/etc
if [ -f /etc/${INSTALL_COMMAND}.conf.d/$FILE ]; then
cp /etc/${INSTALL_COMMAND}.conf.d/$FILE \
${FOLDER}/etc/$FILE
return
fi
echo "## For kde5
# Comment following 2 lines
# if you don't want to install kde5
#
dir ${DEPOT}/kde5-extra|${URL}
dir ${DEPOT}/kde5|${URL}
##
## For kde (4)
# Comment following 2 lines
# if you don't want to install kde (version4)
#
dir ${DEPOT}/kde-extra|${URL}
dir ${DEPOT}/kde|${URL}
#
## For cinnamon
# Cinnamon is not yet ready to ude
# Decomment following 2 lines
# if you want to try cinnamon anyway
#
# dir ${DEPOT}/cinnamon-extra|${URL}
# dir ${DEPOT}/cinnamon|${URL}
#
## For Gnome
# Comment following 2 lines
# if you don't want to install gnome
#
dir ${DEPOT}/gnome-extra|${URL}
dir ${DEPOT}/gnome|${URL}
#
## For mate
# Comment following 2 lines
# if you don't want to install mate
#
dir ${DEPOT}/mate-extra|${URL}
dir ${DEPOT}/mate|${URL}
#
## For xfce4
# Comment following 2 lines
# if you don't want to install xfce4
#
dir ${DEPOT}/xfce4-extra|${URL}
dir ${DEPOT}/xfce4|${URL}
#
## For lxqt
# Comment following 2 lines
# if you don't want to install lxqt
#
dir ${DEPOT}/lxqt-extra|${URL}
dir ${DEPOT}/lxqt|${URL}
#
## For lxde
# Comment following 2 lines
# if you don't want to install lxde
#
dir ${DEPOT}/lxde-extra|${URL}
dir ${DEPOT}/lxde|${URL}
#
## Normally everything under this line
# are needed stuffs
#
## For all the graphical applications
dir ${DEPOT}/gui-extra|${URL}
#
## For a minimal graphical interface
dir ${DEPOT}/gui|${URL}
#
## For all the console applications
dir ${DEPOT}/cli-extra|${URL}
#
## For a minimal console interface
dir ${DEPOT}/cli|${URL}
#
## Strict minimum Base system to be able to boot on it
dir ${DEPOT}/base-extra|${URL}
#
# Chroot system without reboot possibilities for a chroot
dir ${DEPOT}/base|${URL}
#
## Normaly you want to keep base and
base ${DEPOT}/base
#
## and base-extra
base ${DEPOT}/base-extra
#
## If you want to keep more collections remove comments below
# Adjust to your needs
#
# base ${DEPOT}/cli
# base ${DEPOT}/cli-extra
# base ${DEPOT}/gui
# base ${DEPOT}/gui-extra
# base ${DEPOT}/..." > ${FOLDER}/etc/cards.conf
}
generate_nutyx_version() {
local FILE
FILE="nutyx-version"
[ -f ${FOLDER}/var/lib/pkg/$FILE ] && return
[ ! -d ${FOLDER}/var/lib/pkg ] && mkdir -pv ${FOLDER}/var/lib/pkg
echo "name ${CODE_NAME}
version $VERSION" > ${FOLDER}/var/lib/pkg/$FILE
}
install_resolv_conf() {
[ -f /etc/resolv.conf ] && cp /etc/resolv.conf ${FOLDER}/etc
}
successfull_installation () {
echo "
****************************************************
* Installation of NuTyX $VERSION finished. *
* *
* Thanks for installing NuTyX *
* *
* Check http://www.nutyx.org/en/documentation.html *
* or http://www.nutyx.org/fr/documentation.html *
* *
* Make sure to review /etc/cards.conf *
* to meet your requirements in packages selection *
* *
****************************************************
"
}
check_root() {
[ "$UID" != "0" ] && error " You are not root, cannot continue"
}
check_bash() {
BASH_VERSION=`bash --version|head -n1 | cut -d " " -f4|cut -d "(" -f1|sed "s/\.//g"`
if [ -z ${BASH_VERSION} ]; then
error " Wrong interpreter, please use 'bash' as interpreter"
fi
# Checking bash version
if [ ${BASH_VERSION} -lt 4333 ]; then
boot_mesg " You not use 'bash' version 4.3.33 or newer..."
echo_warning
fi
}
check_tools() {
if ! (`which wget > /dev/null`); then
error " Command 'wget' not found, please install wget"
fi
if ! (`which tar > /dev/null`); then
error " Command 'tar' not found, please install tar"
fi
if ! (`which gawk > /dev/null`); then
error " Command 'gawk' not found, please install gawk"
fi
}
check_variables() {
[ -z $URL ] && URL="http://downloads.nutyx.org"
[ -z $VERSION ] && VERSION="8.0"
[ -z $DEPOT ] && DEPOT="/var/lib/pkg/depotrepo"
[ -z $FOLDER ] && FOLDER="/mnt/hd"
HOMEPAGE="${URL}" ## http://downloads.nutyx.org
INSTALL_BASE="$VERSION/$ARCH" ## 8.0/x86_64
DEPOT_ROOT="$HOMEPAGE/${INSTALL_BASE}" ## http://downloads.nutyx.org/8.0/x86_64
DEPOT_BASE="$DEPOT_ROOT/$BASE" ## http://downloads.nutyx.org/8.0/x86_64/base
LOCAL_DEPOT_PACKAGES="$DEPOT/$BASE"
DEPOT_CD="/media/cdrom"
SETUP_FILE=/tmp/setup
# Size of the FullInstall in Mbytes
let BASE_SIZE=450
}
config() {
ARCH=`uname -m`
# Number of seconds between STOPSIG and FALLBACK when stopping processes
KILLDELAY="3"
## Screen Dimensions
# Find current screen size
if [ -z "${COLUMNS}" ]; then
COLUMNS=$(stty size)
COLUMNS=${COLUMNS##* }
fi
# When using remote connections, such as a serial port, stty size returns 0
if [ "${COLUMNS}" = "0" ]; then
COLUMNS=80
fi
## Measurements for positioning result messages
COL=$((${COLUMNS} - 8))
WCOL=$((${COL} - 2))
## Provide an echo that supports -e and -n
# If formatting is needed, $ECHO should be used
case "`echo -e -n test`" in
-[en]*)
ECHO=/bin/echo
;;
*)
ECHO=echo
;;
esac
## Set Cursor Position Commands, used via $ECHO
SET_COL="\\033[${COL}G" # at the $COL char
SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
## Set color commands, used via $ECHO
# Please consult `man console_codes for more information
# under the "ECMA-48 Set Graphics Rendition" section
#
# Warning: when switching from a 8bit to a 9bit font,
# the linux console will reinterpret the bold (1;) to
# the top 256 glyphs of the 9bit font. This does
# not affect framebuffer consoles
NORMAL="\\033[0;39m" # Standard console grey
SUCCESS="\\033[1;32m" # Success is green
WARNING="\\033[1;33m" # Warnings are yellow
FAILURE="\\033[1;31m" # Failures are red
INFO="\\033[1;36m" # Information is light cyan
BRACKET="\\033[1;34m" # Brackets are blue
STRING_LENGTH="0" # the length of the current message
}
check_lfs() {
# LFS is set ?
if [ ! -z "${LFS}" ]; then
DEVICE=${LFS}
FOLDER=${LFS}
else
DEVICE=${FOLDER}
fi
echo "
******************************
Installation path: $DEVICE
******************************"
}
check_mountpoint() {
[ -z $FOLDER ] && error "Variable FOLDER not define"
}
check_arch() {
if [ "$ARCH" != "x86_64" ] && [ "$ARCH" != "i686" ]; then
boot_mesg "
>>> This arch ($ARCH) is not supported"
echo_failure
exit 1
fi
}
create_database() {
[ ! -d ${FOLDER}/var/lib/pkg/DB ] && mkdir -p ${FOLDER}/var/lib/pkg/DB
}
create_locale_link() {
[ ! -d ${FOLDER}/etc/locale ] && mkdir -p ${FOLDER}/etc/locale
if [ -d ${FOLDER}/usr/lib/locale ]; then
rm -r ${FOLDER}/usr/lib/locale
ln -sv /etc/locale/ ${FOLDER}/usr/lib/locale
fi
}
make_directories() {
mkdir ${FOLDER}/{dev,sys,proc,run,tmp,home,srv,mnt}
mkdir -p ${FOLDER}/var/tmp
mkdir -p ${FOLDER}/usr/{,local/}lib
chmod 1777 ${FOLDER}/{,var/}tmp
mkdir -v ${FOLDER}/var/{mail,spool}
mkdir -pv ${FOLDER}/var/run/lock
mknod -m 600 ${FOLDER}/dev/console c 5 1
mknod -m 666 ${FOLDER}/dev/null c 1 3
}
download_pkgadd() {
if [ ! -f $TMP/usr/bin/pkgadd ]; then
cd $TMP
basepackagefile=`getPackageName cards`
if [ "$basepackagefile" == "" ]; then
error "variable 'basepackagefile' is not set"
fi
packagefile=`echo ${basepackagefile}|sed "s|^cards|cards.devel|"`
if [ ! -f ${packagefile} ]; then
wget ${DEPOT_BASE}/cards/$packagefile || print_error_msg
echo_ok
fi
echo "Extraction of cards.devel ..."
tar -xf ${packagefile} || print_error_msg
echo_ok
fi
}
check_mountfolder() {
[ ! -d $FOLDER ] && mkdir -p $FOLDER
}
generate_setupfile() {
echo "#!/bin/bash
source /etc/profile
cards sync
cards install e2fsprogs \
reiserfsprogs \
xfsprogs jfsutils \
btrfs-progs sudo \
sysklogd sysvinit \
dhcpcd grub \
tzdata iproute2 iana-etc \
e3 eudev kmod less \
groff man-db cards.man \
nutyx.man \
lvm2 mdadm dialog cpio squashfs \
linux-firmware \
kernel-lts \
ca-certificates
exit" > $FOLDER/$SETUP_FILE
chmod 177 $FOLDER/$SETUP_FILE
setup_chroot
chroot ${FOLDER} /bin/bash -c "$SETUP_FILE"
unmountall
}
install_configuration_files() {
generate_cards_conf
generate_pkgmk_conf
generate_fstab
generate_passwd
generate_group
generate_bash_profile
generate_bashrc
generate_dmrc
generate_hosts
generate_inputrc
generate_shells
generate_dircolors_sh
generate_extrapaths_sh
generate_readline_sh
generate_umask_sh
generate_profile
generate_hosts
generate_inputrc
generate_modules
generate_createfiles
generate_mouse
generate_udev_retry
generate_rc_site
generate_etc_bashrc
generate_blfs_bootscripts
generate_nutyx_version
}
print_help() {
echo "
usage: `basename ${INSTALL_COMMAND}` [options] options
-p, --path <installation-path> will install NuTyX in <installation-path>
-ec, --enter-chroot will enter in the chroot if exist
-ic, --install-config will install all the configuration files only
-h, --help print help and exit
-v, --version print the version and exit
"
}
parse_options() {
while [ "$1" ]; do
case $1 in
-h|--help)
print_help
exit 0;;
-ec|--enter-chroot)
check_lfs "$@"
check_root
setup_chroot
enter_chroot
unmountall
exit 0;;
-ic|--install-config)
check_variables
check_lfs "$@"
check_root
check_mountfolder
check_mountpoint
make_directories
create_locale_link
install_configuration_files
exit 0;;
-p|--path)
if [ ! "$2" ]; then
echo "`basename $INSTALL_COMMAND`: option $1 requires an argument"
exit 1
fi
FOLDER="$2"
shift;;
-v|--version)
echo "`basename $INSTALL_COMMAND` $VERSION-$RELEASE"
exit 0;;
/*)
boot_mesg "
>>> This methode is depreciate <<<: use '-p $1' instead or adjust the 'LFS' variable"
echo_warning
echo "
press any key to continue ...
"
read a
FOLDER="$1";;
*)
echo "`basename $0`: invalid option $1"
exit 1 ;;
esac
shift
done
}
main() {
config
[ -f /etc/`basename $INSTALL_COMMAND`.conf ] && source /etc/`basename $INSTALL_COMMAND`.conf
check_variables "$@"
parse_options "$@"
check_arch
check_lfs "$@"
if [ $# -lt 1 ] && [ -z "$LFS" ] ; then
echo "
*******************************************
* You didn't specify enough arguments *
* Argument 1: Folder destionation *
* *
* Please re-enter the command with the *
* corrects arguments *
*******************************************
example: ${INSTALL_COMMAND} -p /chroot
"
return
fi
check_root
check_bash
check_tools
TMP=`mktemp -d`
check_mountfolder
check_mountpoint
download_pkgadd
create_database
install_base
create_locale_link
make_directories
install_configuration_files
install_resolv_conf
generate_setupfile
end
successfull_installation
}
readonly CODE_NAME="houaphan"
readonly BASE="base"
readonly RELEASE=2
INSTALL_COMMAND="`basename $0`"
main "$@"