milislinux/milis
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
milis/bin/milis-kur

997 lines
32 KiB
Text
Raw Normal View History

malfs mekanizma guncelleme
2016-03-16 01:25:06 +00:00
#!/bin/sh
#-
# Copyright (c) 2012-2015 Juan Romero Pardines <xtraeme@voidlinux.eu>.
# 2012 Dave Elusive <davehome@redthumb.info.tm>.
# 2016 milisarge <milisarge@gmail.com>.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-
# Make sure we don't inherit these from env.
SOURCE_DONE=
HOSTNAME_DONE=
KEYBOARD_DONE=
LOCALE_DONE=
TIMEZONE_DONE=
ROOTPASSWORD_DONE=
USERNAME_DONE=
USERPASSWORD_DONE=
BOOTLOADER_DONE=
PARTITIONS_DONE=
NETWORK_DONE=
FILESYSTEMS_DONE=
TARGETDIR=/mnt/hedef
LOG=/dev/tty8
CONF_FILE=/tmp/.milis-kur.conf
if [ ! -f $CONF_FILE ]; then
touch -f $CONF_FILE
fi
ANSWER=$(mktemp -t miliskur-XXXXXXXX || exit 1)
TARGET_FSTAB=$(mktemp -t miliskur-fstab-XXXXXXXX || exit 1)
trap "DIE" INT TERM QUIT
# disable printk
if [ -w /proc/sys/kernel/printk ]; then
echo 0 >/proc/sys/kernel/printk
fi
# Detect if this is an EFI system.
if [ -e /sys/firmware/efi/systab ]; then
EFI_SYSTEM=1
fi
# dialog colors
BLACK="\Z0"
RED="\Z1"
GREEN="\Z2"
YELLOW="\Z3"
BLUE="\Z4"
MAGENTA="\Z5"
CYAN="\Z6"
WHITE="\Z7"
BOLD="\Zb"
REVERSE="\Zr"
UNDERLINE="\Zu"
RESET="\Zn"
# Properties shared per widget.
MENULABEL="${BOLD}Ok tuşlarıyla menüyü gezinme,TAB tuşuyla butonlar arası geçiş,ENTER tuşuyla seçim yapın.${RESET}"
MENUSIZE="14 60 0"
INPUTSIZE="8 60"
MSGBOXSIZE="8 70"
YESNOSIZE="$INPUTSIZE"
WIDGET_SIZE="10 70"
DIALOG() {
rm -f $ANSWER
dialog --colors --keep-tite --no-shadow --no-mouse \
--backtitle "${BOLD}${WHITE}Milis İşletim Sistemi kurulumu -- Milis 1.0 milisarge@gmail.com ${RESET}" \
--cancel-label "Geri" --aspect 20 "$@" 2>$ANSWER
return $?
}
DIE() {
rval=$1
[ -z "$rval" ] && rval=0
clear
rm -f $ANSWER $TARGET_FSTAB
# reenable printk
if [ -w /proc/sys/kernel/printk ]; then
echo 4 >/proc/sys/kernel/printk
fi
umount_filesystems
exit $rval
}
set_option() {
if grep -Eq "^${1}.*" $CONF_FILE; then
sed -i -e "/^${1}.*/d" $CONF_FILE
fi
echo "${1} ${2}" >>$CONF_FILE
}
get_option() {
echo $(grep -E "^${1}.*" $CONF_FILE|sed -e "s|${1}||")
}
show_disks() {
local dev size sectorsize gbytes
# IDE
for dev in $(ls /sys/block|grep -E '^hd'); do
if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then
# Find out nr sectors and bytes per sector;
echo "/dev/$dev"
size=$(cat /sys/block/$dev/size)
sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
echo "size:${gbytes}GB;sector_size:$sectorsize"
fi
done
# SATA/SCSI and Virtual disks (virtio)
for dev in $(ls /sys/block|grep -E '^([sv]|xv)d|mmcblk'); do
echo "/dev/$dev"
size=$(cat /sys/block/$dev/size)
sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
echo "size:${gbytes}GB;sector_size:$sectorsize"
done
# cciss(4) devices
for dev in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]$'); do
echo "/dev/cciss/$dev"
size=$(cat /sys/block/cciss\!$dev/size)
sectorsize=$(cat /sys/block/cciss\!$dev/queue/hw_sector_size)
gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
echo "size:${gbytes}GB;sector_size:$sectorsize"
done
}
show_partitions() {
local dev fstype fssize p part
set -- $(show_disks)
while [ $# -ne 0 ]; do
disk=$(basename $1)
shift 2
# ATA/SCSI/SATA
for p in /sys/block/$disk/$disk*; do
if [ -d $p ]; then
part=$(basename $p)
fstype=$(lsblk -nfr /dev/$part|awk '{print $2}'|head -1)
[ "$fstype" = "iso9660" ] && continue
[ "$fstype" = "crypto_LUKS" ] && continue
[ "$fstype" = "LVM2_member" ] && continue
fssize=$(lsblk -nr /dev/$part|awk '{print $4}'|head -1)
echo "/dev/$part"
echo "size:${fssize:-unknown};fstype:${fstype:-none}"
fi
done
done
# Software raid (md)
for p in $(ls -d /dev/md* 2>/dev/null|grep '[0-9]'); do
part=$(basename $p)
if cat /proc/mdstat|grep -qw $part; then
fstype=$(lsblk -nfr /dev/$part|awk '{print $2}')
[ "$fstype" = "crypto_LUKS" ] && continue
[ "$fstype" = "LVM2_member" ] && continue
fssize=$(lsblk -nr /dev/$part|awk '{print $4}')
echo "$p"
echo "size:${fssize:-unknown};fstype:${fstype:-none}"
fi
done
# cciss(4) devices
for part in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]p[0-9]+'); do
fstype=$(lsblk -nfr /dev/cciss/$part|awk '{print $2}')
[ "$fstype" = "crypto_LUKS" ] && continue
[ "$fstype" = "LVM2_member" ] && continue
fssize=$(lsblk -nr /dev/cciss/$part|awk '{print $4}')
echo "/dev/cciss/$part"
echo "size:${fssize:-unknown};fstype:${fstype:-none}"
done
if [ -e /sbin/lvs ]; then
# LVM
lvs --noheadings|while read lvname vgname perms size; do
echo "/dev/mapper/${vgname}-${lvname}"
echo "size:${size};fstype:lvm"
done
fi
}
menu_filesystems() {
local dev fstype fssize mntpoint reformat
while true; do
DIALOG --title " Ayarlamak için bir disk bölümü seçiniz. " --menu "$MENULABEL" \
${MENUSIZE} $(show_partitions)
[ $? -ne 0 ] && return
dev=$(cat $ANSWER)
DIALOG --title " $dev için bir dosya sistemi seçiniz. " \
--menu "$MENULABEL" ${MENUSIZE} \
"btrfs" "Oracle's Btrfs" \
"ext2" "Linux ext2 (no journaling)" \
"ext3" "Linux ext3 (journal)" \
"ext4" "Linux ext4 (journal)" \
"f2fs" "Flash-Friendly Filesystem" \
"swap" "Linux swap" \
"vfat" "FAT32" \
"xfs" "SGI's XFS"
if [ $? -eq 0 ]; then
fstype=$(cat $ANSWER)
else
continue
fi
if [ "$fstype" != "swap" ]; then
DIALOG --inputbox " $dev için bir bağlama noktası seçiniz:" ${INPUTSIZE}
if [ $? -eq 0 ]; then
mntpoint=$(cat $ANSWER)
elif [ $? -eq 1 ]; then
continue
fi
else
mntpoint=swap
fi
DIALOG --yesno " $dev üzerinde yeni bir dosya sistemi oluşturmak istiyor musunuz?" ${YESNOSIZE}
if [ $? -eq 0 ]; then
reformat=1
elif [ $? -eq 1 ]; then
reformat=0
else
continue
fi
fssize=$(lsblk -nr $dev|awk '{print $4}')
set -- "$fstype" "$fssize" "$mntpoint" "$reformat"
if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then
local bdev=$(basename $dev)
local ddev=$(basename $(dirname $dev))
if [ "$ddev" != "dev" ]; then
sed -i -e "/^MOUNTPOINT \/dev\/${ddev}\/${bdev}.*/d" $CONF_FILE
else
sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $CONF_FILE
fi
echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$CONF_FILE
fi
done
}
menu_partitions() {
DIALOG --title " Bölümleme yapmak için bir disk seçiniz. " \
--menu "$MENULABEL" ${MENUSIZE} $(show_disks)
if [ $? -eq 0 ]; then
local device=$(cat $ANSWER)
DIALOG --title "Modify Partition Table on $device" --msgbox "\n
${BOLD}cfdisk will be executed in disk $device.${RESET}\n\n
For BIOS systems, MBR or GPT partition tables are supported.\n
To use GPT on PC BIOS systems an empty partition of 1MB must be added\n
at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n
${BOLD}NOTE: you don't need this on EFI systems.${RESET}\n\n
For EFI systems GPT is mandatory and a FAT32 partition with at least\n
100MB must be created with the TOGGLE \`boot', this will be used as\n
EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n
At least 1 partitions is required for the rootfs (/).\n
For swap, RAM*2 must be really enough. For / 600MB are required.\n\n
${BOLD}WARNING: /usr is not supported as a separate partition.${RESET}\n
${RESET}\n" 18 80
if [ $? -eq 0 ]; then
while true; do
clear; cfdisk $device; PARTITIONS_DONE=1
break
done
else
return
fi
fi
}
menu_keymap() {
local _keymaps="$(find /lib/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort)"
local _KEYMAPS=
for f in ${_keymaps}; do
_KEYMAPS="${_KEYMAPS} ${f} -"
done
while true; do
DIALOG --title " Select your keymap " --menu "$MENULABEL" 14 70 14 ${_KEYMAPS}
if [ $? -eq 0 ]; then
set_option KEYMAP "$(cat $ANSWER)"
loadkeys "$(cat $ANSWER)"
KEYBOARD_DONE=1
break
else
return
fi
done
}
set_keymap() {
local KEYMAP=$(get_option KEYMAP)
if [ -f /etc/vconsole.conf ]; then
sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/vconsole.conf
else
sed -i -e "s|#\?KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/rc.conf
fi
}
menu_locale() {
local _locales="$(locale --all-locales |awk '{print $1}'|sed -e 's/^#//')"
local _LOCALES=
for f in ${_locales}; do
_LOCALES="${_LOCALES} ${f} -"
done
while true; do
DIALOG --title " yerel bilgi seçimi " --menu "$MENULABEL" 14 70 14 ${_LOCALES}
if [ $? -eq 0 ]; then
set_option LOCALE "$(cat $ANSWER)"
LOCALE_DONE=1
break
else
return
fi
done
}
set_locale() {
if [ -f $TARGETDIR/etc/default/libc-locales ]; then
#yerelleştirme ayarı yapılacak bashrc de değişim olacak.
local LOCALE=$(get_option LOCALE)
sed -i -e "s|LANG=.*|LANG=$LOCALE|g" $TARGETDIR/etc/locale.conf
# Uncomment locale from /etc/default/libc-locales and regenerate it.
sed -e "/${LOCALE}/s/^\#//" -i $TARGETDIR/etc/default/libc-locales
fi
}
menu_timezone() {
local _tzones="$(cd /usr/share/zoneinfo; find Africa/ America/ Antarctica/ Arctic/ Asia/ Atlantic/ Australia/ Europe/ Indian/ Pacific/ posix/ -type f | sort)"
local _TIMEZONES=
for f in ${_tzones}; do
_TIMEZONES="${_TIMEZONES} ${f} -"
done
while true; do
DIALOG --title " Select your timezone " --menu "$MENULABEL" 14 70 14 ${_TIMEZONES}
if [ $? -eq 0 ]; then
set_option TIMEZONE "$(cat $ANSWER)"
TIMEZONE_DONE=1
break
else
return
fi
done
}
set_timezone() {
local TIMEZONE="$(get_option TIMEZONE)"
sed -i -e "s|#TIMEZONE=.*|TIMEZONE=$TIMEZONE|g" $TARGETDIR/etc/rc.conf
}
menu_hostname() {
while true; do
DIALOG --inputbox "Set the machine hostname:" ${INPUTSIZE}
if [ $? -eq 0 ]; then
set_option HOSTNAME "$(cat $ANSWER)"
HOSTNAME_DONE=1
break
else
return
fi
done
}
set_hostname() {
echo $(get_option HOSTNAME) > $TARGETDIR/etc/hostname
}
menu_rootpassword() {
local _firstpass= _secondpass= _desc=
while true; do
if [ -n "${_firstpass}" ]; then
_desc="Enter the root password again (password won't be displayed)"
else
_desc="Enter the root password (password won't be displayed)"
fi
DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE}
if [ $? -eq 0 ]; then
if [ -z "${_firstpass}" ]; then
_firstpass="$(cat $ANSWER)"
else
_secondpass="$(cat $ANSWER)"
fi
if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
if [ "${_firstpass}" != "${_secondpass}" ]; then
DIALOG --infobox "Passwords do not match! please reenter it again" 6 80
unset _firstpass _secondpass
sleep 2 && continue
fi
set_option ROOTPASSWORD "${_firstpass}"
ROOTPASSWORD_DONE=1
break
fi
else
return
fi
done
}
set_rootpassword() {
echo "root:$(get_option ROOTPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512
}
menu_useraccount() {
local _firstpass= _secondpass= _desc=
while true; do
DIALOG --inputbox "Birincil kullanıcı adını seçin:" ${INPUTSIZE} "miliskuv"
if [ $? -eq 0 ]; then
set_option USERNAME "$(cat $ANSWER)"
USERNAME_DONE=1
break
else
return
fi
done
while true; do
if [ -n "${_firstpass}" ]; then
_desc="Enter the password for '$(get_option USERNAME)' again (password won't be displayed)"
else
_desc="Enter the password for '$(get_option USERNAME)' (password won't be displayed)"
fi
DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE}
if [ $? -eq 0 ]; then
if [ -z "${_firstpass}" ]; then
_firstpass="$(cat $ANSWER)"
else
_secondpass="$(cat $ANSWER)"
fi
if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
if [ "${_firstpass}" != "${_secondpass}" ]; then
DIALOG --infobox "Passwords do not match! please reenter it again" 6 80
unset _firstpass _secondpass
sleep 2 && continue
fi
set_option USERPASSWORD "${_firstpass}"
USERPASSWORD_DONE=1
break
fi
else
return
fi
done
}
set_useraccount() {
useradd -R $TARGETDIR -m -G wheel,audio,video,floppy,cdrom,optical,kvm,xbuilder \
"$(get_option USERNAME)"
echo "$(get_option USERNAME):$(get_option USERPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512
}
menu_bootloader() {
while true; do
DIALOG --title " Select the disk to install the bootloader" \
--menu "$MENULABEL" ${MENUSIZE} $(show_disks) none "Manage bootloader otherwise"
if [ $? -eq 0 ]; then
set_option BOOTLOADER "$(cat $ANSWER)"
BOOTLOADER_DONE=1
break
else
return
fi
done
}
set_bootloader() {
local dev=$(get_option BOOTLOADER) grub_args=
if [ "$dev" = "none" ]; then return; fi
# Check if it's an EFI system via efivars module.
if [ -n "$EFI_SYSTEM" ]; then
grub_args="--target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=milis_grub --recheck"
fi
echo "Running grub-install $grub_args $dev..." >$LOG
chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
failed to install GRUB to $dev!\nCheck $LOG for errors." ${MSGBOXSIZE}
DIE 1
fi
echo "Running grub-mkconfig on $TARGETDIR..." >$LOG
chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR${RESET}: \
failed to run grub-mkconfig!\nCheck $LOG for errors." ${MSGBOXSIZE}
DIE 1
fi
}
test_network() {
#ağ testi
if [ $? -eq 0 ]; then
DIALOG --msgbox "Ağ düzgün çalışıyor!" ${MSGBOXSIZE}
NETWORK_DONE=1
return 1
fi
DIALOG --msgbox "Ağda sorun var,gerekli ayarları yapınız." ${MSGBOXSIZE}
}
configure_wifi() {
local dev="$1" ssid enc pass _wpasupconf=/etc/wpa_supplicant/wpa_supplicant.conf
DIALOG --form "Wireless configuration for ${dev}\n(encryption type: wep or wpa)" 0 0 0 \
"SSID:" 1 1 "" 1 16 30 0 \
"Encryption:" 2 1 "" 2 16 4 3 \
"Password:" 3 1 "" 3 16 50 0 || return 1
set -- $(cat $ANSWER)
ssid="$1"; enc="$2"; pass="$3";
if [ -z "$ssid" ]; then
DIALOG --msgbox "Invalid SSID." ${MSGBOXSIZE}
return 1
elif [ -z "$enc" -o "$enc" != "wep" -a "$enc" != "wpa" ]; then
DIALOG --msgbox "Invalid encryption type (possible values: wep or wpa)." ${MSXBOXSIZE}
return 1
elif [ -z "$pass" ]; then
DIALOG --msgbox "Invalid AP password." ${MSGBOXSIZE}
fi
rm -f ${_wpasupconf%.conf}-${dev}.conf
cp -f ${_wpasupconf} ${_wpasupconf%.conf}-${dev}.conf
if [ "$enc" = "wep" ]; then
echo "network={" >> ${_wpasupconf%.conf}-${dev}.conf
echo " ssid=\"$ssid\"" >> ${_wpasupconf%.conf}-${dev}.conf
echo " wep_key0=\"$pass\"" >> ${_wpasupconf%.conf}-${dev}.conf
echo " wep_tx_keyidx=0" >> ${_wpasupconf%.conf}-${dev}.conf
echo " auth_alg=SHARED" >> ${_wpasupconf%.conf}-${dev}.conf
echo "}" >> ${_wpasupconf%.conf}-${dev}.conf
else
wpa_passphrase "$ssid" "$pass" >> ${_wpasupconf%.conf}-${dev}.conf
fi
configure_net_dhcp $dev
return $?
}
configure_net() {
local dev="$1" rval
DIALOG --yesno "Do you want to use DHCP for $dev?" ${YESNOSIZE}
rval=$?
if [ $rval -eq 0 ]; then
configure_net_dhcp $dev
elif [ $rval -eq 1 ]; then
configure_net_static $dev
fi
}
iface_setup() {
ip addr show dev $1|grep -q 'inet '
return $?
}
configure_net_dhcp() {
local dev="$1"
iface_setup $dev
if [ $? -eq 1 ]; then
dhcpcd -t 10 -w -4 -L $dev -e "wpa_supplicant_conf=/etc/wpa_supplicant/wpa_supplicant-${dev}.conf" 2>&1 | tee $LOG | \
DIALOG --progressbox "Initializing $dev via DHCP..." ${WIDGET_SIZE}
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to run dhcpcd. See $LOG for details." ${MSGBOXSIZE}
return 1
fi
iface_setup $dev
if [ $? -eq 1 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} DHCP request failed for $dev. Check $LOG for errors." ${MSGBOXSIZE}
return 1
fi
fi
test_network
if [ $? -eq 1 ]; then
set_option NETWORK "${dev} dhcp"
fi
}
configure_net_static() {
local ip gw dns1 dns2 dev=$1
DIALOG --form "Static IP configuration for $dev:" 0 0 0 \
"IP address:" 1 1 "192.168.0.2" 1 21 20 0 \
"Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \
"DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \
"DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1
set -- $(cat $ANSWER)
ip=$1; gw=$2; dns1=$3; dns2=$4
echo "running: ip link set dev $dev up" >$LOG
ip link set dev $dev up >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to bring $dev interface." ${MSGBOXSIZE}
return 1
fi
echo "running: ip addr add $ip dev $dev"
ip addr add $ip dev $dev >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to set ip to the $dev interface." ${MSGBOXSIZE}
return 1
fi
ip route add $gw dev $dev >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to setup your gateway." ${MSGBOXSIZE}
return 1
fi
echo "nameserver $dns1" >/etc/resolv.conf
echo "nameserver $dns2" >>/etc/resolv.conf
test_network
if [ $? -eq 1 ]; then
set_option NETWORK "${dev} static $ip $gw $dns1 $dns2"
fi
}
menu_network() {
local dev addr f DEVICES
for f in $(ls /sys/class/net); do
[ "$f" = "lo" ] && continue
addr=$(cat /sys/class/net/$f/address)
DEVICES="$DEVICES $f $addr"
done
DIALOG --title " Select the network interface to configure " \
--menu "$MENULABEL" ${MENUSIZE} ${DEVICES}
if [ $? -eq 0 ]; then
dev=$(cat $ANSWER)
if $(echo $dev|egrep -q "^wl.*" 2>/dev/null); then
configure_wifi $dev
else
configure_net $dev
fi
fi
}
validate_filesystems() {
local mnts dev size fstype mntpt mkfs rootfound fmt
local usrfound efi_system_partition
unset TARGETFS
mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
set -- ${mnts}
while [ $# -ne 0 ]; do
dev=$2; fstype=$3; size=$4; mntpt="$5"; mkfs=$6
shift 6
if [ "$mntpt" = "/" ]; then
rootfound=1
elif [ "$mntpt" = "/usr" ]; then
usrfound=1
elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then
efi_system_partition=1
fi
if [ "$mkfs" -eq 1 ]; then
fmt="NEW FILESYSTEM: "
fi
if [ -z "$TARGETFS" ]; then
TARGETFS="${fmt}$dev ($size) mounted on $mntpt as ${fstype}\n"
else
TARGETFS="${TARGETFS}${fmt}${dev} ($size) mounted on $mntpt as ${fstype}\n"
fi
done
if [ -z "$rootfound" ]; then
DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
kökdizin (/) için bağlama noktası ayarlı değil." ${MSGBOXSIZE}
return 1
elif [ -n "$usrfound" ]; then
DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
/usr bağlama noktası desteklenmiyor,siliniz." ${MSGBOXSIZE}
return 1
elif [ -n "$EFI_SYSTEM" -a -z "$efi_system_partition" ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
The EFI System Partition has not yet been configured, please create it\n
as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${MSGBOXSIZE}
fi
FILESYSTEMS_DONE=1
}
create_filesystems() {
local mnts dev mntpt fstype fspassno mkfs size rv uuid
mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
set -- ${mnts}
while [ $# -ne 0 ]; do
dev=$2; fstype=$3; mntpt="$5"; mkfs=$6
shift 6
# swap partitions
if [ "$fstype" = "swap" ]; then
swapoff $dev >/dev/null 2>&1
if [ "$mkfs" -eq 1 ]; then
mkswap $dev >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
failed to create swap on ${dev}!\ncheck $LOG for errors." ${MSGBOXSIZE}
DIE 1
fi
fi
swapon $dev >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
failed to activate swap on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE}
DIE 1
fi
# Add entry for target fstab
uuid=$(blkid -o value -s UUID "$dev")
echo "UUID=$uuid none swap sw 0 0" >>$TARGET_FSTAB
continue
fi
if [ "$mkfs" -eq 1 ]; then
case "$fstype" in
btrfs) MKFS="mkfs.btrfs -f"; modprobe btrfs >$LOG 2>&1;;
ext2) MKFS="mke2fs -F"; modprobe ext2 >$LOG 2>&1;;
ext3) MKFS="mke2fs -F -j"; modprobe ext3 >$LOG 2>&1;;
ext4) MKFS="mke2fs -F -t ext4"; modprobe ext4 >$LOG 2>&1;;
f2fs) MKFS="mkfs.f2fs"; modprobe f2fs >$LOG 2>&1;;
vfat) MKFS="mkfs.vfat -F32"; modprobe vfat >$LOG 2>&1;;
xfs) MKFS="mkfs.xfs -f"; modprobe xfs >$LOG 2>&1;;
esac
DIALOG --infobox "Creating filesystem $fstype on $dev for $mntpt ..." 8 60
echo "Running $MKFS $dev..." >$LOG
$MKFS $dev >$LOG 2>&1; rv=$?
if [ $rv -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
$dev $fstype dosyasistemi oluşturma esnasında hata oluştu!\nayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE}
DIE 1
fi
fi
# Mount rootfs the first one.
[ "$mntpt" != "/" ] && continue
mkdir -p $TARGETDIR
echo " $dev noktası $mntpt a bağlanıyor($fstype)..." >$LOG
mount -t $fstype $dev $TARGETDIR >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
$dev bağlanması ${mntpt} esnasında hata oluştu! ayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE}
DIE 1
fi
# Add entry to target fstab
uuid=$(blkid -o value -s UUID "$dev")
if [ "$fstype" = "f2fs" ]; then
fspassno=0
else
fspassno=1
fi
echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB
done
# mount all filesystems in target rootfs
mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
set -- ${mnts}
while [ $# -ne 0 ]; do
dev=$2; fstype=$3; mntpt="$5"
shift 6
[ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue
mkdir -p ${TARGETDIR}${mntpt}
echo "Mounting $dev on $mntpt ($fstype)..." >$LOG
mount -t $fstype $dev ${TARGETDIR}${mntpt} >$LOG 2>&1
if [ $? -ne 0 ]; then
DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
failed to mount $dev on $mntpt! check $LOG for errors." ${MSGBOXSIZE}
DIE
fi
# Add entry to target fstab
uuid=$(blkid -o value -s UUID "$dev")
echo "UUID=$uuid $mntpt $fstype defaults 0 2" >>$TARGET_FSTAB
done
}
mount_filesystems() {
for f in sys proc dev; do
[ ! -d $TARGETDIR/$f ] && mkdir $TARGETDIR/$f
echo "Mounting $TARGETDIR/$f..." >$LOG
mount --bind /$f $TARGETDIR/$f >$LOG 2>&1
done
}
umount_filesystems() {
local f
for f in sys/fs/fuse/connections sys proc dev; do
echo "Unmounting $TARGETDIR/$f..." >$LOG
umount $TARGETDIR/$f >$LOG 2>&1
done
local mnts="$(grep -E '^MOUNTPOINT.*$' $CONF_FILE)"
set -- ${mnts}
while [ $# -ne 0 ]; do
local dev=$2; local fstype=$3; local mntpt=$5
shift 6
if [ "$fstype" = "swap" ]; then
echo "Disabling swap space on $dev..." >$LOG
swapoff $dev >$LOG 2>&1
continue
fi
if [ "$mntpt" != "/" ]; then
echo "Unmounting $TARGETDIR/$mntpt..." >$LOG
umount $TARGETDIR/$mntpt >$LOG 2>&1
fi
done
echo "Unmounting $TARGETDIR..." >$LOG
umount $TARGETDIR >$LOG 2>&1
}
copy_rootfs() {
DIALOG --title "Ayrıntı için $LOG a bakınız" \
--infobox "Çalışan ortam hedef noktaya kopyalanıyor,lütfen bekleyiniz ..." 4 60
LANG=C cp -axvnu / $TARGETDIR >$LOG 2>&1
if [ $? -ne 0 ]; then
DIE 1
fi
}
install_packages() {
local _grub= _syspkg=
if [ -n "$EFI_SYSTEM" ]; then
_grub="grub-x86_64-efi"
else
_grub="grub"
fi
_syspkg="base-system"
#temel sistem paketleri kurulacak
}
enable_dhcpd() {
malfs mekanizma guncelleme
2016-03-16 07:43:35 +02:00
echo "dhcp hedef kurulum noktasında ayarlanacak"
malfs mekanizma guncelleme
2016-03-16 01:25:06 +00:00
}
menu_install() {
# Don't continue if filesystems are not ready.
validate_filesystems || return 1
#şimdilik kapalı
ROOTPASSWORD_DONE=1 #"$(get_option ROOTPASSWORD)"
BOOTLOADER_DONE=1 #"$(get_option BOOTLOADER)"
if [ -z "$FILESYSTEMS_DONE" ]; then
DIALOG --msgbox "${BOLD}Gerekli dosya sistemi ayarlı değil, \
gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
return 1
elif [ -z "$ROOTPASSWORD_DONE" ]; then
DIALOG --msgbox "${BOLD}Root şifresi ayarlı değil, \
gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
return 1
elif [ -z "$BOOTLOADER_DONE" ]; then
DIALOG --msgbox "${BOLD}Bootloader için disk ayarlı değil, \
gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
return 1
fi
DIALOG --yesno "${BOLD}Şu işlemler uygulanacak:${RESET}\n\n
${BOLD}${TARGETFS}${RESET}\n
${BOLD}${RED}UYARI: YENİ DOSYA SİSTEMİ İÇİN HEDEF BÖLÜMDEKİ TÜM DATA SİLİNECEK.${RESET}\n\n
${BOLD}Devam etmek istiyor musunuz?${RESET}" 20 80 || return
unset TARGETFS
# Create and mount filesystems
create_filesystems
copy_rootfs
rm -r -f $TARGETDIR/tmp/*
DIALOG --title "Ayrıntılar için $LOG kontrol ediniz." \
--infobox "Hedef için başlatıcı ayarı yapılıyor ..." 4 60
echo "Hedef için başlatıcı ayarı yapılıyor ..." >$LOG
# mount required fs
mount_filesystems
chroot $TARGETDIR dracut --no-hostonly --add-drivers "ahci" --force >>$LOG 2>&1
DIALOG --infobox "Kurulum ayarları uygulanıyor..." 4 60
# copy target fstab.
install -Dm644 $TARGET_FSTAB $TARGETDIR/etc/fstab
# Mount /tmp as tmpfs.
echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >> $TARGETDIR/etc/fstab
# set up keymap, locale, timezone, hostname and root passwd.-simdilik kapali
#set_keymap
#set_locale
#set_timezone
#set_hostname
#set_rootpassword
#set_useraccount
# install bootloader.-simdilik kapali
#set_bootloader
sync && sync && sync
# unmount all filesystems.
umount_filesystems
# installed successfully.
DIALOG --yesno "${BOLD}Milis İşletim Sistemi başarıyla kuruldu!${RESET}\n
Bilgisayar yeniden başlatılsın mı?" ${YESNOSIZE}
if [ $? -eq 0 ]; then
shutdown -r now
else
return
fi
}
menu_source() {
local src=
DIALOG --title " Select installation source " \
--menu "$MENULABEL" 8 70 0 \
"Local" "Packages from ISO image" \
"Network" "Packages from official remote reposity"
case "$(cat $ANSWER)" in
"Local") src="local";;
"Network") src="net";
if [ -z "$NETWORK_DONE" ]; then
menu_network;
fi;;
*) return 1;;
esac
SOURCE_DONE=1
set_option SOURCE $src
}
menu() {
if [ -z "$DEFITEM" ]; then
DEFITEM="Keyboard"
fi
DIALOG --default-item $DEFITEM \
--extra-button --extra-label "Ayarlar" \
--title " Milis İşletim Sistemi kurulumu menüsü " \
--menu "$MENULABEL" 10 70 0 \
"Dosyasistemi" "Dosya sistemlerini ayarlama,gerekli bağlamalar" \
"Kur" "Kayıt edilen ayarlarla kuruluma başlanması" \
"Çıkış" "Kurulumdan çıkış"
if [ $? -eq 3 ]; then
# Show settings
cp $CONF_FILE /tmp/conf_hidden.$$;
sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$
DIALOG --title "Kurulum için ayarlar kayıt edildi." --textbox /tmp/conf_hidden.$$ 14 60
rm /tmp/conf_hidden.$$
return
fi
case $(cat $ANSWER) in
"Dosyasistemi") menu_filesystems && [ -n "$FILESYSTEMS_DONE" ] && DEFITEM="Kur";;
"Kur") menu_install;;
"Çıkış") DIE;;
*) DIALOG --yesno "Kurulumu iptal et?" ${YESNOSIZE} && DIE
esac
}
if [ ! -x /bin/dialog ]; then
echo "ERROR: missing dialog command, exiting..."
exit 1
fi
#
# main()
#
DIALOG --title "${BOLD}${RED} Milis İşletim Sistemi Hakkında ... ${RESET}" --msgbox "\n
Milis işletim sistemi kurulumuna hoşgeldiniz. Milis sıfırdan kaynak kodlardan
oluşturulan yerli bağımsız bir işletim sistemidir.Kendine özgü mps isimli paket yöneticisine sahiptir.\
Mps ile hem derleme talimatları kullanılarak paket üretilebilir hem de direk ikili paketlerin kurulumu sağlanır.
irtibat için ${BOLD}#milisarge on irc.freenode.org${RESET}.\n\n
${BOLD}milisarge@gmail.com${RESET}\n\n" 16 80
while true; do
menu
done
exit 0
# vim: set ts=4 sw=4 et:
Reference in a new issue Copy permalink