858 lines
39 KiB
ArmAsm
858 lines
39 KiB
ArmAsm
|
|
#include "../gpsp_config.h"
|
|
|
|
#define defsymbl(symbol) \
|
|
.align 2; \
|
|
.type symbol, %function ;\
|
|
.global symbol ; \
|
|
.global _##symbol ; \
|
|
symbol: \
|
|
_##symbol:
|
|
|
|
.text
|
|
.align 2
|
|
|
|
#define REG_R0 (0 * 4)
|
|
#define REG_R1 (1 * 4)
|
|
#define REG_R2 (2 * 4)
|
|
#define REG_R3 (3 * 4)
|
|
#define REG_R4 (4 * 4)
|
|
#define REG_R5 (5 * 4)
|
|
#define REG_R6 (6 * 4)
|
|
#define REG_R7 (7 * 4)
|
|
#define REG_R8 (8 * 4)
|
|
#define REG_R9 (9 * 4)
|
|
#define REG_R10 (10 * 4)
|
|
#define REG_R11 (11 * 4)
|
|
#define REG_R12 (12 * 4)
|
|
#define REG_R13 (13 * 4)
|
|
#define REG_R14 (14 * 4)
|
|
#define REG_SP (13 * 4)
|
|
#define REG_LR (14 * 4)
|
|
#define REG_PC (15 * 4)
|
|
#define REG_CPSR (16 * 4)
|
|
#define CPU_MODE (17 * 4)
|
|
#define CPU_HALT_STATE (18 * 4)
|
|
|
|
#define REG_N_FLAG (20 * 4)
|
|
#define REG_Z_FLAG (21 * 4)
|
|
#define REG_C_FLAG (22 * 4)
|
|
#define REG_V_FLAG (23 * 4)
|
|
#define CHANGED_PC_STATUS (24 * 4)
|
|
#define COMPLETED_FRAME (25 * 4)
|
|
#define OAM_UPDATED (26 * 4)
|
|
#define REG_SAVE (27 * 4)
|
|
#define REG_SAVE2 (28 * 4)
|
|
#define REG_SAVE3 (29 * 4)
|
|
#define REG_SAVE4 (30 * 4)
|
|
#define REG_SAVE5 (31 * 4)
|
|
|
|
#define reg_a0 r0
|
|
#define reg_a1 r1
|
|
#define reg_a2 r2
|
|
|
|
#define reg_base r11
|
|
#define reg_flags r9
|
|
|
|
#define reg_cycles r12
|
|
|
|
#define reg_x0 r3
|
|
#define reg_x1 r4
|
|
#define reg_x2 r5
|
|
#define reg_x3 r6
|
|
#define reg_x4 r7
|
|
#define reg_x5 r8
|
|
|
|
|
|
#define MODE_SUPERVISOR 3
|
|
|
|
@ Memory offsets from reg_base to the different buffers
|
|
#define IWRAM_OFF -0xA8000
|
|
#define VRAM_OFF -0x98000
|
|
#define EWRAM_OFF -0x80000
|
|
#define SPSR_RAM_OFF 0x100
|
|
#define STORE_TBL_OFF 0x118
|
|
#define REGMODE_RAM_OFF 0x400
|
|
#define OAM_RAM_OFF 0x500
|
|
#define PAL_RAM_OFF 0x900
|
|
#define RDMAP_OFF 0xD00
|
|
#define IOREG_OFF 0x8D00
|
|
|
|
|
|
#if __ARM_ARCH >= 6
|
|
#define extract_u16(rd, rs) \
|
|
uxth rd, rs
|
|
#else
|
|
#define extract_u16(rd, rs) \
|
|
bic rd, rs, #0xff000000; \
|
|
bic rd, rd, #0x00ff0000
|
|
#endif
|
|
|
|
@ Will load the register set from memory into the appropriate cached registers.
|
|
@ See arm_emit.h for listing explanation.
|
|
|
|
#define load_registers_arm() ;\
|
|
ldr reg_x0, [reg_base, #REG_R0] ;\
|
|
ldr reg_x1, [reg_base, #REG_R1] ;\
|
|
ldr reg_x2, [reg_base, #REG_R6] ;\
|
|
ldr reg_x3, [reg_base, #REG_R9] ;\
|
|
ldr reg_x4, [reg_base, #REG_R12] ;\
|
|
ldr reg_x5, [reg_base, #REG_R14] ;\
|
|
|
|
#define load_registers_thumb() ;\
|
|
ldm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5}
|
|
|
|
|
|
@ Will store the register set from cached registers back to memory.
|
|
|
|
#define store_registers_arm() ;\
|
|
str reg_x0, [reg_base, #REG_R0] ;\
|
|
str reg_x1, [reg_base, #REG_R1] ;\
|
|
str reg_x2, [reg_base, #REG_R6] ;\
|
|
str reg_x3, [reg_base, #REG_R9] ;\
|
|
str reg_x4, [reg_base, #REG_R12] ;\
|
|
str reg_x5, [reg_base, #REG_R14] ;\
|
|
|
|
#define store_registers_thumb() ;\
|
|
stm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5}
|
|
|
|
|
|
@ Returns an updated persistent cpsr with the cached flags register.
|
|
@ Uses reg as a temporary register and returns the CPSR here.
|
|
|
|
#define collapse_flags_no_update(reg) ;\
|
|
ldr reg, [reg_base, #REG_CPSR] /* reg = cpsr */;\
|
|
bic reg, reg, #0xF0000000 /* clear ALU flags in cpsr */;\
|
|
and reg_flags, reg_flags, #0xF0000000 /* clear non-ALU flags */;\
|
|
orr reg, reg, reg_flags /* update cpsr with ALU flags */;\
|
|
|
|
@ Updates cpsr using the above macro.
|
|
|
|
#define collapse_flags(reg) ;\
|
|
collapse_flags_no_update(reg) ;\
|
|
str reg, [reg_base, #REG_CPSR] ;\
|
|
|
|
@ Loads the saved flags register from the persistent cpsr.
|
|
|
|
#define extract_flags() ;\
|
|
ldr reg_flags, [reg_base, #REG_CPSR] ;\
|
|
msr cpsr_f, reg_flags ;\
|
|
|
|
|
|
#define save_flags() ;\
|
|
mrs reg_flags, cpsr ;\
|
|
|
|
#define restore_flags() ;\
|
|
msr cpsr_f, reg_flags ;\
|
|
|
|
@ Align the stack to 64 bits (ABIs that don't require it, still recommend so)
|
|
#define call_c_saved_regs r2, r3, r12, lr
|
|
|
|
@ Calls a C function - reloads the stack pointer and saves all caller save
|
|
@ registers which are important to the dynarec.
|
|
|
|
#define call_c_function(function) ;\
|
|
stmdb sp!, { call_c_saved_regs } ;\
|
|
bl function ;\
|
|
ldmia sp!, { call_c_saved_regs } ;\
|
|
|
|
|
|
@ Update the GBA hardware (video, sound, input, etc)
|
|
|
|
@ Input:
|
|
@ r0: current PC
|
|
|
|
#define return_straight() ;\
|
|
bx lr ;\
|
|
|
|
#define return_add() ;\
|
|
add pc, lr, #4 ;\
|
|
|
|
#define load_pc_straight() ;\
|
|
ldr r0, [lr, #-12] ;\
|
|
|
|
#define load_pc_add() ;\
|
|
ldr r0, [lr] ;\
|
|
|
|
|
|
#define arm_update_gba_builder(name, mode, return_op) ;\
|
|
;\
|
|
defsymbl(arm_update_gba_##name) ;\
|
|
load_pc_##return_op() ;\
|
|
str r0, [reg_base, #REG_PC] /* write out the PC */;\
|
|
;\
|
|
save_flags() ;\
|
|
collapse_flags(r0) /* update the flags */;\
|
|
;\
|
|
store_registers_##mode() /* save out registers */;\
|
|
call_c_function(update_gba) /* update GBA state */;\
|
|
;\
|
|
ldr r1, [reg_base, #COMPLETED_FRAME] /* return if new frame */;\
|
|
cmp r1, #0 ;\
|
|
bne return_to_main ;\
|
|
;\
|
|
mvn reg_cycles, r0 /* load new cycle count */;\
|
|
;\
|
|
ldr r0, [reg_base, #CHANGED_PC_STATUS] /* load PC changed status */;\
|
|
cmp r0, #0 /* see if PC has changed */;\
|
|
bne 1f /* go jump/translate */;\
|
|
;\
|
|
load_registers_##mode() /* reload registers */;\
|
|
restore_flags() ;\
|
|
return_##return_op() /* continue, no PC change */;\
|
|
;\
|
|
1: ;\
|
|
ldr r1, [reg_base, #REG_CPSR] /* r1 = flags */;\
|
|
ldr r0, [reg_base, #REG_PC] /* load new PC */;\
|
|
tst r1, #0x20 /* see if Thumb bit is set */;\
|
|
bne 2f /* if so load Thumb PC */;\
|
|
;\
|
|
load_registers_arm() /* load ARM regs */;\
|
|
call_c_function(block_lookup_address_arm) ;\
|
|
restore_flags() ;\
|
|
bx r0 /* jump to new ARM block */;\
|
|
2: ;\
|
|
load_registers_thumb() /* load Thumb regs */;\
|
|
call_c_function(block_lookup_address_thumb) ;\
|
|
restore_flags() ;\
|
|
bx r0 /* jump to new ARM block */;\
|
|
.size arm_update_gba_##name, .-arm_update_gba_##name
|
|
|
|
arm_update_gba_builder(arm, arm, straight)
|
|
arm_update_gba_builder(thumb, thumb, straight)
|
|
|
|
arm_update_gba_builder(idle_arm, arm, add)
|
|
arm_update_gba_builder(idle_thumb, thumb, add)
|
|
|
|
|
|
@ Cheat hooks for master function
|
|
@ This is called whenever PC == cheats-master-function
|
|
@ Just calls the C function to process cheats
|
|
|
|
#define cheat_hook_builder(mode) ;\
|
|
defsymbl(mode##_cheat_hook) ;\
|
|
save_flags() ;\
|
|
store_registers_##mode() ;\
|
|
call_c_function(process_cheats) ;\
|
|
load_registers_##mode() ;\
|
|
restore_flags() ;\
|
|
bx lr ;\
|
|
|
|
cheat_hook_builder(arm)
|
|
cheat_hook_builder(thumb)
|
|
|
|
|
|
@ These are b stubs for performing indirect branches. They are not
|
|
@ linked to and don't return, instead they link elsewhere.
|
|
|
|
@ Input:
|
|
@ r0: PC to branch to
|
|
|
|
defsymbl(arm_indirect_branch_arm)
|
|
save_flags()
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0
|
|
|
|
defsymbl(arm_indirect_branch_thumb)
|
|
save_flags()
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0
|
|
|
|
defsymbl(arm_indirect_branch_dual_arm)
|
|
save_flags()
|
|
tst r0, #0x01 @ check lower bit
|
|
bne 1f @ if set going to Thumb mode
|
|
add r0, #2 @ two LSB are cleared after
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0 @ keep executing arm code
|
|
1:
|
|
store_registers_arm() @ save out ARM registers
|
|
ldr r1, [reg_base, #REG_CPSR] @ load cpsr
|
|
load_registers_thumb() @ load in Thumb registers
|
|
orr r1, r1, #0x20 @ set Thumb mode
|
|
str r1, [reg_base, #REG_CPSR] @ store flags
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0
|
|
.size arm_indirect_branch_dual_arm, .-arm_indirect_branch_dual_arm
|
|
|
|
defsymbl(arm_indirect_branch_dual_thumb)
|
|
save_flags()
|
|
tst r0, #0x01 @ check lower bit
|
|
beq 1f @ if set going to ARM mode
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0 @ keep executing thumb code
|
|
1:
|
|
store_registers_thumb() @ save out Thumb registers
|
|
ldr r1, [reg_base, #REG_CPSR] @ load cpsr
|
|
load_registers_arm() @ load in ARM registers
|
|
bic r1, r1, #0x20 @ clear Thumb mode
|
|
str r1, [reg_base, #REG_CPSR] @ store flags
|
|
add r0, #2 @ two LSB are cleared after
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0
|
|
.size arm_indirect_branch_dual_thumb, .-arm_indirect_branch_dual_thumb
|
|
|
|
@ Update the cpsr.
|
|
|
|
@ Input:
|
|
@ r0: new cpsr value
|
|
@ r1: bitmask of which bits in cpsr to update
|
|
@ r2: current PC
|
|
|
|
defsymbl(execute_store_cpsr)
|
|
save_flags()
|
|
and reg_flags, r0, r1 @ reg_flags = new_cpsr & store_mask
|
|
ldr r0, [reg_base, #REG_CPSR] @ r0 = cpsr
|
|
bic r0, r0, r1 @ r0 = cpsr & ~store_mask
|
|
orr reg_flags, reg_flags, r0 @ reg_flags = new_cpsr | cpsr
|
|
|
|
mov r0, reg_flags @ also put new cpsr in r0
|
|
|
|
store_registers_arm() @ save ARM registers
|
|
ldr r2, [lr] @ r2 = pc
|
|
call_c_function(execute_store_cpsr_body)
|
|
load_registers_arm() @ restore ARM registers
|
|
|
|
cmp r0, #0 @ check new PC
|
|
bne 1f @ if it's zero, resume
|
|
|
|
restore_flags()
|
|
add pc, lr, #4 @ return
|
|
|
|
1:
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0 @ return to PC ARM address
|
|
.size execute_store_cpsr, .-execute_store_cpsr
|
|
|
|
@ Restore the cpsr from the mode spsr and mode shift.
|
|
|
|
@ Input:
|
|
@ r0: current pc
|
|
|
|
defsymbl(execute_spsr_restore)
|
|
save_flags()
|
|
add r1, reg_base, #SPSR_RAM_OFF @ r1 = spsr
|
|
ldr r2, [reg_base, #CPU_MODE] @ r2 = cpu_mode
|
|
ldr r1, [r1, r2, lsl #2] @ r1 = spsr[cpu_mode] (new cpsr)
|
|
str r1, [reg_base, #REG_CPSR] @ update cpsr
|
|
mov reg_flags, r1 @ also, update shadow flags
|
|
|
|
@ This function call will pass r0 (address) and return it.
|
|
store_registers_arm() @ save ARM registers
|
|
call_c_function(execute_spsr_restore_body)
|
|
|
|
ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr
|
|
tst r1, #0x20 @ see if Thumb mode is set
|
|
bne 2f @ if so handle it
|
|
|
|
load_registers_arm() @ restore ARM registers
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0
|
|
|
|
2:
|
|
load_registers_thumb() @ load Thumb registers
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0
|
|
|
|
|
|
@ Setup the mode transition work for calling an SWI.
|
|
|
|
@ Input:
|
|
@ r0: current pc
|
|
|
|
#define execute_swi_builder(mode) ;\
|
|
;\
|
|
defsymbl(execute_swi_##mode) ;\
|
|
save_flags() ;\
|
|
add r1, reg_base, #REGMODE_RAM_OFF /* r1 = reg_mode */;\
|
|
/* reg_mode[MODE_SUPERVISOR][6] = pc */;\
|
|
ldr r0, [lr] /* load PC */;\
|
|
str r0, [r1, #((MODE_SUPERVISOR * (7 * 4)) + (6 * 4))] ;\
|
|
collapse_flags_no_update(r0) /* r0 = cpsr */;\
|
|
add r1, reg_base, #SPSR_RAM_OFF /* r1 = spsr */;\
|
|
str r0, [r1, #(MODE_SUPERVISOR * 4)] /* spsr[MODE_SUPERVISOR] = cpsr */;\
|
|
bic r0, r0, #0x3F /* clear mode flag in r0 */;\
|
|
orr r0, r0, #(0x13 | 0x80) /* supervisor mode + disable IRQ */;\
|
|
str r0, [reg_base, #REG_CPSR] /* update cpsr */;\
|
|
;\
|
|
mov r0, #MODE_SUPERVISOR ;\
|
|
;\
|
|
store_registers_##mode() /* store regs for mode */;\
|
|
call_c_function(set_cpu_mode) /* set the CPU mode to svsr */;\
|
|
load_registers_arm() /* load ARM regs */;\
|
|
;\
|
|
restore_flags() ;\
|
|
add pc, lr, #4 /* return */;\
|
|
|
|
execute_swi_builder(arm)
|
|
execute_swi_builder(thumb)
|
|
|
|
|
|
@ Start program execution. Normally the mode should be Thumb and the
|
|
@ PC should be 0x8000000, however if a save state is preloaded this
|
|
@ will be different.
|
|
|
|
@ Input:
|
|
@ r0: initial value for cycle counter
|
|
|
|
@ Uses sp as reg_base; must hold consistently true.
|
|
|
|
defsymbl(execute_arm_translate_internal)
|
|
|
|
@ save the registers to be able to return later
|
|
stmdb sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr }
|
|
|
|
mov reg_base, r1 @ init base_reg
|
|
|
|
mvn reg_cycles, r0 @ load cycle counter
|
|
|
|
@ Check whether the CPU is sleeping already, we should just wait for IRQs
|
|
ldr r1, [reg_base, #CPU_HALT_STATE]
|
|
cmp r1, #0
|
|
bne alert_loop
|
|
|
|
ldr r0, [reg_base, #REG_PC] @ r0 = current pc
|
|
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
|
|
tst r1, #0x20 @ see if Thumb bit is set
|
|
|
|
bne 1f @ if so lookup thumb
|
|
|
|
load_registers_arm() @ load ARM registers
|
|
call_c_function(block_lookup_address_arm)
|
|
extract_flags() @ load flags
|
|
bx r0 @ jump to first ARM block
|
|
|
|
1:
|
|
load_registers_thumb() @ load Thumb registers
|
|
call_c_function(block_lookup_address_thumb)
|
|
extract_flags() @ load flags
|
|
bx r0 @ jump to first Thumb block
|
|
|
|
|
|
@ Epilogue to return to the main thread (whatever called execute_arm_translate)
|
|
|
|
return_to_main:
|
|
@ restore the saved regs and return
|
|
ldmia sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr }
|
|
bx lr
|
|
|
|
|
|
#define store_align_8() ;\
|
|
and r1, r1, #0xff ;\
|
|
|
|
#define store_align_16() ;\
|
|
bic r0, r0, #0x01 ;\
|
|
extract_u16(r1, r1) ;\
|
|
|
|
#define store_align_32() ;\
|
|
bic r0, r0, #0x03 ;\
|
|
|
|
#define mask_addr_8(nbits) ;\
|
|
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
|
|
mov r0, r0, lsr #(32 - nbits) /* high bits are now clear */;\
|
|
|
|
#define mask_addr_16(nbits) ;\
|
|
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
|
|
mov r0, r0, lsr #(32 - nbits + 1) /* high bits are now clear */;\
|
|
mov r0, r0, lsl #1 /* LSB is also zero */;\
|
|
|
|
#define mask_addr_32(nbits) ;\
|
|
mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\
|
|
mov r0, r0, lsr #(32 - nbits + 2) /* high bits are now clear */;\
|
|
mov r0, r0, lsl #2 /* 2 LSB are also zero */;\
|
|
|
|
@ Vram, OAM and palette memories can only be accessed at a 16 bit boundary
|
|
#define mask_addr_bus16_32(nbits) mask_addr_32(nbits)
|
|
#define mask_addr_bus16_16(nbits) mask_addr_16(nbits)
|
|
#define mask_addr_bus16_8(nbits) \
|
|
mask_addr_16(nbits) \
|
|
extract_u16(r1, r1)
|
|
|
|
|
|
@ Write out to memory.
|
|
|
|
@ Input:
|
|
@ r0: address
|
|
@ r1: value
|
|
@
|
|
@ The instruction at LR is not an inst but a u32 data that contains the PC
|
|
@ Used for SMC. That's why return is essentially `pc = lr + 4`
|
|
|
|
#define execute_store_builder(store_type, str_op, str_op16, load_op, tnum) ;\
|
|
;\
|
|
ext_store_u##store_type: ;\
|
|
save_flags() ;\
|
|
ldr r2, [lr] /* load PC */;\
|
|
str r2, [reg_base, #REG_PC] /* write out PC */;\
|
|
store_align_##store_type() ;\
|
|
call_c_function(write_memory##store_type) ;\
|
|
b write_epilogue /* handle additional write stuff */;\
|
|
;\
|
|
ext_store_iwram_u##store_type: ;\
|
|
save_flags() ;\
|
|
mask_addr_##store_type(15) /* Mask to mirror memory (+align)*/;\
|
|
add r2, reg_base, #(IWRAM_OFF+0x8000) /* r2 = iwram base */;\
|
|
str_op r1, [r0, r2] /* store data */;\
|
|
sub r2, r2, #0x8000 /* r2 = iwram smc base */;\
|
|
load_op r1, [r0, r2] /* r1 = SMC sentinel */;\
|
|
cmp r1, #0 /* Check value, should be zero */;\
|
|
bne 3f /* if so perform smc write */;\
|
|
restore_flags() ;\
|
|
add pc, lr, #4 /* return */;\
|
|
;\
|
|
ext_store_ewram_u##store_type: ;\
|
|
save_flags() ;\
|
|
mask_addr_##store_type(18) /* Mask to mirror memory (+align)*/;\
|
|
add r2, reg_base, #EWRAM_OFF /* r2 = ewram base */;\
|
|
str_op r1, [r0, r2] /* store data */;\
|
|
add r2, r2, #0x40000 /* r2 = ewram smc base */;\
|
|
load_op r1, [r0, r2] /* r1 = SMC sentinel */;\
|
|
cmp r1, #0 /* Check value, should be zero */;\
|
|
bne 3f /* if so perform smc write */;\
|
|
restore_flags() ;\
|
|
add pc, lr, #4 /* return */;\
|
|
;\
|
|
ext_store_vram_u##store_type: ;\
|
|
save_flags() ;\
|
|
mask_addr_bus16_##store_type(17) /* Mask to mirror memory (+align)*/;\
|
|
cmp r0, #0x18000 /* Check if exceeds 96KB */;\
|
|
subcs r0, r0, #0x8000 /* Mirror to the last bank */;\
|
|
add r2, reg_base, #VRAM_OFF /* r2 = vram base */;\
|
|
restore_flags() ;\
|
|
str_op16 r1, [r0, r2] /* store data */;\
|
|
add pc, lr, #4 /* return */;\
|
|
;\
|
|
ext_store_oam_ram_u##store_type: ;\
|
|
mask_addr_bus16_##store_type(10) /* Mask to mirror memory (+align)*/;\
|
|
add r2, reg_base, #OAM_RAM_OFF /* r2 = oam ram base */;\
|
|
str_op16 r1, [r0, r2] /* store data */;\
|
|
str r2, [reg_base, #OAM_UPDATED] /* write non zero to signal */;\
|
|
add pc, lr, #4 /* return */;\
|
|
;\
|
|
3: ;\
|
|
ldr r0, [lr] /* load PC */;\
|
|
str r0, [reg_base, #REG_PC] /* write out PC */;\
|
|
b smc_write /* perform smc write */;\
|
|
|
|
@ for ignored areas, just return
|
|
ext_store_ignore:
|
|
add pc, lr, #4 @ return
|
|
|
|
#define store_lookup_table(store_type) ;\
|
|
.word ext_store_u##store_type /* -1: ignore, for > 0x0F */;\
|
|
.word ext_store_ignore /* 0x00: BIOS, ignore */;\
|
|
.word ext_store_ignore /* 0x01: ignore */;\
|
|
.word ext_store_ewram_u##store_type /* 0x02: ewram */;\
|
|
.word ext_store_iwram_u##store_type /* 0x03: iwram */;\
|
|
.word ext_store_u##store_type /* 0x04: I/O regs */;\
|
|
.word ext_store_u##store_type /* 0x05: palette RAM */;\
|
|
.word ext_store_vram_u##store_type /* 0x06: vram */;\
|
|
.word ext_store_oam_ram_u##store_type /* 0x07: oam ram */;\
|
|
.word ext_store_u##store_type /* 0x08: gamepak: ignore */;\
|
|
.word ext_store_u##store_type /* 0x09: gamepak: ignore */;\
|
|
.word ext_store_u##store_type /* 0x0A: gamepak: ignore */;\
|
|
.word ext_store_u##store_type /* 0x0B: gamepak: ignore */;\
|
|
.word ext_store_u##store_type /* 0x0C: gamepak: ignore */;\
|
|
.word ext_store_u##store_type /* 0x0D: EEPROM */;\
|
|
.word ext_store_u##store_type /* 0x0E: backup */;\
|
|
.word ext_store_ignore /* 0x0F: ignore */;\
|
|
|
|
execute_store_builder(8, strb, strh, ldrb, 0)
|
|
execute_store_builder(16, strh, strh, ldrh, 1)
|
|
execute_store_builder(32, str, str, ldr, 2)
|
|
|
|
@ This is a store that is executed in a strm case (so no SMC checks in-between)
|
|
|
|
ext_store_u32_safe:
|
|
str lr, [reg_base, #REG_SAVE3] @ Restore lr
|
|
save_flags()
|
|
call_c_function(write_memory32) @ Perform 32bit store
|
|
restore_flags()
|
|
ldr pc, [reg_base, #REG_SAVE3] @ return
|
|
|
|
ext_store_iwram_u32_safe:
|
|
mask_addr_8(15) @ Mask to mirror memory (no need to align!)
|
|
add r2, reg_base, #(IWRAM_OFF+0x8000) @ r2 = iwram base
|
|
str r1, [r0, r2] @ store data
|
|
bx lr @ Return
|
|
|
|
ext_store_ewram_u32_safe:
|
|
mask_addr_8(18) @ Mask to mirror memory (no need to align!)
|
|
add r2, reg_base, #EWRAM_OFF @ r2 = ewram base
|
|
str r1, [r0, r2] @ store data
|
|
bx lr @ Return
|
|
|
|
ext_store_vram_u32_safe:
|
|
mask_addr_8(17) @ Mask to mirror memory (no need to align!)
|
|
save_flags()
|
|
add r2, reg_base, #VRAM_OFF @ r2 = vram base
|
|
cmp r0, #0x18000 @ Check if exceeds 96KB
|
|
subcs r0, r0, #0x8000 @ Mirror to the last bank
|
|
str r1, [r0, r2] @ store data
|
|
restore_flags()
|
|
bx lr @ Return
|
|
|
|
ext_store_oam_ram_u32_safe:
|
|
mask_addr_8(10) @ Mask to mirror memory (no need to align!)
|
|
add r2, reg_base, #OAM_RAM_OFF @ r2 = oam ram base
|
|
str r1, [r0, r2] @ store data
|
|
str r2, [reg_base, #OAM_UPDATED] @ store anything non zero here
|
|
bx lr @ Return
|
|
|
|
|
|
write_epilogue:
|
|
cmp r0, #0 @ check if the write rose an alert
|
|
beq 4f @ if not we can exit
|
|
|
|
collapse_flags(r1) @ interrupt needs current flags
|
|
|
|
cmp r0, #2 @ see if the alert is due to SMC
|
|
beq smc_write @ if so, goto SMC handler
|
|
|
|
ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr
|
|
tst r1, #0x20 @ see if Thumb bit is set
|
|
bne 1f @ if so do Thumb update
|
|
|
|
store_registers_arm() @ save ARM registers
|
|
b alert_loop
|
|
|
|
1:
|
|
store_registers_thumb() @ save Thumb registers
|
|
|
|
alert_loop:
|
|
call_c_function(update_gba) @ update GBA until CPU isn't halted
|
|
|
|
ldr r1, [reg_base, #COMPLETED_FRAME] @ Check whether a frame was completed
|
|
cmp r1, #0
|
|
bne return_to_main
|
|
|
|
ldr r1, [reg_base, #CPU_HALT_STATE] @ Check whether the CPU is halted
|
|
cmp r1, #0
|
|
bne alert_loop @ Keep looping until it is
|
|
|
|
mvn reg_cycles, r0 @ load new cycle count
|
|
ldr r0, [reg_base, #REG_PC] @ load new PC
|
|
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
|
|
tst r1, #0x20 @ see if Thumb bit is set
|
|
bne 2f
|
|
|
|
load_registers_arm()
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0 @ jump to new ARM block
|
|
|
|
2:
|
|
load_registers_thumb()
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0 @ jump to new Thumb block
|
|
|
|
4:
|
|
restore_flags()
|
|
add pc, lr, #4 @ return
|
|
|
|
|
|
smc_write:
|
|
call_c_function(flush_translation_cache_ram)
|
|
|
|
lookup_pc:
|
|
ldr r0, [reg_base, #REG_PC] @ r0 = new pc
|
|
ldr r1, [reg_base, #REG_CPSR] @ r1 = flags
|
|
tst r1, #0x20 @ see if Thumb bit is set
|
|
beq lookup_pc_arm @ if not lookup ARM
|
|
|
|
lookup_pc_thumb:
|
|
call_c_function(block_lookup_address_thumb)
|
|
restore_flags()
|
|
bx r0 @ jump to new Thumb block
|
|
|
|
lookup_pc_arm:
|
|
call_c_function(block_lookup_address_arm)
|
|
restore_flags()
|
|
bx r0 @ jump to new ARM block
|
|
|
|
|
|
#define exec_ld_op_s8(mirrorbits) ;\
|
|
mov r0, r0, lsl #(32 - mirrorbits) ;\
|
|
mov r0, r0, lsr #(32 - mirrorbits) ;\
|
|
ldrsb r0, [r2, r0]
|
|
|
|
#define exec_ld_op_u8(mirrorbits) ;\
|
|
mov r0, r0, lsl #(32 - mirrorbits) ;\
|
|
mov r0, r0, lsr #(32 - mirrorbits) ;\
|
|
ldrb r0, [r2, r0]
|
|
|
|
#define exec_ld_op_s16(mirrorbits) ;\
|
|
mov r0, r0, lsl #(32 - mirrorbits) ;\
|
|
mov r0, r0, lsr #(32 - mirrorbits) ;\
|
|
ldrsh r0, [r2, r0]
|
|
|
|
#define exec_ld_op_u16(mirrorbits) ;\
|
|
mov r0, r0, lsl #(32 - mirrorbits) ;\
|
|
mov r0, r0, lsr #(32 - mirrorbits) ;\
|
|
ldrh r0, [r2, r0]
|
|
|
|
#define exec_ld_op_u32(mirrorbits) ;\
|
|
mov r0, r0, lsl #(32 - mirrorbits) ;\
|
|
ldr r0, [r2, r0, lsr #(32 - mirrorbits)] ;\
|
|
|
|
|
|
#define execute_load_builder(load_type, albits, load_function, tnum) ;\
|
|
;\
|
|
ld_bios_##load_type: /* BIOS area, need to verify PC */;\
|
|
save_flags() ;\
|
|
ldr r1, [lr] /* r1 = PC */;\
|
|
mov r2, r1, lsr #15 /* r2 = High addr bits from PC */;\
|
|
cmp r2, #0 ;\
|
|
bne 10f /* Jump to slow handler */;\
|
|
ldr r2, [reg_base, #RDMAP_OFF] /* r2 = read_mem[0] */;\
|
|
exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\
|
|
restore_flags() ;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
ld_ewram_##load_type: /* EWRAM area */;\
|
|
add r2, reg_base, #EWRAM_OFF ;\
|
|
exec_ld_op_##load_type(18) /* Clear upper bits (18 LSB) */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
ld_iwram_##load_type: /* IWRAM area */;\
|
|
add r2, reg_base, #(IWRAM_OFF+0x8000) ;\
|
|
exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
ld_ioram_##load_type: /* I/O RAM area */;\
|
|
add r2, reg_base, #IOREG_OFF ;\
|
|
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
ld_palram_##load_type: /* Palette RAM area */;\
|
|
add r2, reg_base, #PAL_RAM_OFF ;\
|
|
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
ld_oamram_##load_type: /* OAM RAM area */;\
|
|
add r2, reg_base, #OAM_RAM_OFF ;\
|
|
exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
/* ROM area (or VRAM): uses generic memory handlers */ ;\
|
|
ld_rdmap_##load_type: ;\
|
|
add r2, reg_base, #RDMAP_OFF /* r2 = memory_map_read */;\
|
|
mov r1, r0, lsr #15 /* r1 = page index of address */;\
|
|
ldr r2, [r2, r1, lsl #2] /* r2 = base addr */;\
|
|
;\
|
|
exec_ld_op_##load_type(15) /* Pages are 32KB big */;\
|
|
add pc, lr, #4 ;\
|
|
;\
|
|
/* Slow load path, for open/unmapped loads */;\
|
|
ld_slow_##load_type: ;\
|
|
save_flags() ;\
|
|
ldr r1, [lr] /* r1 = PC */;\
|
|
10: ;\
|
|
str r1, [reg_base, #REG_PC] /* update PC */;\
|
|
call_c_function(load_function) ;\
|
|
restore_flags() ;\
|
|
add pc, lr, #4 /* return */;\
|
|
|
|
|
|
#define load_table_gen(load_type) ;\
|
|
.long ld_slow_##load_type /* -1 (for regions above F) */;\
|
|
.long ld_bios_##load_type /* 0 BIOS */;\
|
|
.long ld_slow_##load_type /* 1 Bad region */;\
|
|
.long ld_ewram_##load_type /* 2 EWRAM */;\
|
|
.long ld_iwram_##load_type /* 3 IWRAM */;\
|
|
.long ld_ioram_##load_type /* 4 I/O */;\
|
|
.long ld_palram_##load_type /* 5 Palette RAM, via map */;\
|
|
.long ld_rdmap_##load_type /* 6 VRAM area */;\
|
|
.long ld_oamram_##load_type /* 7 OAM RAM */;\
|
|
.long ld_rdmap_##load_type /* 8 ROM, via map */;\
|
|
.long ld_rdmap_##load_type /* 9 ROM, via map */;\
|
|
.long ld_rdmap_##load_type /* A ROM, via map */;\
|
|
.long ld_rdmap_##load_type /* B ROM, via map */;\
|
|
.long ld_rdmap_##load_type /* C ROM, via map */;\
|
|
.long ld_slow_##load_type /* D ROM or EEPROM/FLASH */;\
|
|
.long ld_slow_##load_type /* E EEPROM/FLASH */;\
|
|
.long ld_slow_##load_type /* F Bad region */;\
|
|
|
|
.pool
|
|
|
|
execute_load_builder(u8, 0, read_memory8, 4)
|
|
execute_load_builder(s8, 0, read_memory8s, 5)
|
|
execute_load_builder(u16, 1, read_memory16, 6)
|
|
execute_load_builder(s16, 1, read_memory16s, 7)
|
|
execute_load_builder(u32, 2, read_memory32, 8)
|
|
|
|
.data
|
|
.align 4
|
|
|
|
defsymbl(ldst_handler_functions)
|
|
store_lookup_table(8)
|
|
store_lookup_table(16)
|
|
store_lookup_table(32)
|
|
store_lookup_table(32_safe)
|
|
load_table_gen(u8)
|
|
load_table_gen(s8)
|
|
load_table_gen(u16)
|
|
load_table_gen(s16)
|
|
load_table_gen(u32)
|
|
|
|
.bss
|
|
.align 4
|
|
|
|
defsymbl(iwram)
|
|
.space 0x10000
|
|
defsymbl(vram)
|
|
.space 0x18000
|
|
defsymbl(ewram)
|
|
.space 0x80000
|
|
defsymbl(reg)
|
|
.space 0x100
|
|
defsymbl(spsr)
|
|
.space 24
|
|
@ Place lookup tables here for easy access via base_reg too
|
|
defsymbl(ldst_lookup_tables)
|
|
.space 4*17*4 @ store
|
|
.space 5*17*4 @ loads
|
|
.space 132 @ Padding for alignment
|
|
defsymbl(reg_mode)
|
|
.space 196
|
|
.space 60 @ More padding!
|
|
defsymbl(oam_ram)
|
|
.space 0x400
|
|
defsymbl(palette_ram)
|
|
.space 0x400
|
|
defsymbl(memory_map_read)
|
|
.space 0x8000
|
|
defsymbl(io_registers)
|
|
.space 0x400
|
|
|
|
defsymbl(palette_ram_converted)
|
|
.space 0x400
|
|
|
|
@ Vita and 3DS (and of course mmap) map their own cache sections through some
|
|
@ platform-speficic mechanisms.
|
|
#if !defined(MMAP_JIT_CACHE) && !defined(VITA) && !defined(_3DS)
|
|
|
|
@ Make this section executable!
|
|
.text
|
|
.section .jit,"awx",%nobits
|
|
.align 4
|
|
defsymbl(rom_translation_cache)
|
|
.space ROM_TRANSLATION_CACHE_SIZE
|
|
.size rom_translation_cache, .-rom_translation_cache
|
|
defsymbl(ram_translation_cache)
|
|
.space RAM_TRANSLATION_CACHE_SIZE
|
|
.size ram_translation_cache, .-ram_translation_cache
|
|
|
|
#endif
|
|
|