* Add protocol field
* Switch protocol specific information according to active protocol
* Hide PuSH subscription related buttons if ActivityPub is active
* Ajout de traductions manquantes
Ajoute des traductions pour les chaînes n’en ayant pas en version 1.5.1.
Add translations for the strings that are missing them in 1.5.1.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « status » par « statut »
Remplace le mot anglais « status » par sa traduction française « statut ».
Replace the English word "status" by its French translation "statut".
* Correction de la politique de confidentialité
Apporte diverses corrections à la traduction de la politique de confidentialité.
Add various fixes to the privacy policy's translation.
* Remplace « mentionné » par « mentionné·e »
Harmonise la traduction en remplaçant « mentionné » par sa forme épicène.
Harmonize the translation by replacing "mentionné" (sure) by its epicene form.
* Remplace « Coup d’œil » par « Jeter un coup d’œil… »
Remplace la première traduction par une forme plus proche de la version originelle.
Replace the first translation by something closer to the original version.
* Remplace « Bon Appétoot ! » par « Bon appouetit ! »
Remplace « Bon Appétoot ! » par « Bon appouetit ! » pour essayer de conserver le jeu de mot.
Replace « Bon Appétoot ! » by « Bon appouetit ! » to keep the pun.
* Remplace « Bon Appétoot ! » par « Bon appouetit ! » (2)
Remplace « Bon Appétoot ! » par « Bon appouetit ! » pour essayer de conserver le jeu de mot.
Replace « Bon Appétoot ! » by « Bon appouetit ! » to keep the pun.f
* Corrections
Corrige des fautes d’orthographe et change « appouetit » pour « appouétit ».
Correct some mistakes and change "appouetit" to "appouétit".
* Add ActivityPub inbox
* Handle ActivityPub deletes
* Handle ActivityPub creates
* Handle ActivityPub announces
* Stubs for handling all activities that need to be handled
* Add ActivityPub actor resolving
* Handle conversation URI passing in ActivityPub
* Handle content language in ActivityPub
* Send accept header when fetching actor, handle JSON parse errors
* Test for ActivityPub::FetchRemoteAccountService
* Handle public key and icon/image when embedded/as array/as resolvable URI
* Implement ActivityPub::FetchRemoteStatusService
* Add stubs for more interactions
* Undo activities implemented
* Handle out of order activities
* Hook up ActivityPub to ResolveRemoteAccountService, handle
Update Account activities
* Add fragment IDs to all transient activity serializers
* Add tests and fixes
* Add stubs for missing tests
* Add more tests
* Add more tests
* Update and expanding Dutch strings for 1.5
Only privacy policy is not translated, but is included. Hopefully I have time to translate this another time (you can set your own privacy policy now anyway).
* Missing file
* A few changes cause of changes in another file
* Fix
* Update Dutch strings for 1.5
* nl
* fix
don't know how that ended up there
* Update nl.yml
Deployment with Capistrano was failing due to a mismatch between the loaded
version of Capistrano and the one specified in the deployment
configuration. Bumping the version in config/deploy.rb fixes this issue.
* Allow domain blocks to reject media without silencing or suspending
* Fix typo
* Hide 'Reject media' button when superfluous, instead of disabling it
* Properly hide 'reject media' checkbox on page load if needed
This may happen when resubmitting the domain block form after an error.
* Don't ask whether undoing a media-only block should be retroactive
* Rename :media_only block to :noop
* Display :noop block as None in frontend, allow blocks that do nothing
* Remove 'coding' line auto-added by emacs
* add fr-FR locales to the landing page
* moar french locales
* terms of service/privacy policy
* remove un-used locales in the client (yarn manage:translations)
* update french locales in the client
* remove duplicate locales in fr.yml
* fix typos per PR comments in fr.yml
* put back default messages
* translate untranslated keys on the client
* add "push" after notifications
* correctly ident ToS in fr.yml
* Mise à jour de la traduction de la page d’accueil
Met à jour les traductions et ajoute les chaînes manquantes suite à la refonte de la page d’accueil.
Update translations and add the strings introduced by the landing page's redesign.
* Correction d’erreurs
Corrige l’indentation de certaines clefs et supprime admin.settings.setting qui n’existe plus dans le projet original.
Fix some indentations and delete admin.settings.setting, which have been removed upstream.
"defaults post privacy to followers-only" only means...
* default value of `visibility` param on post API
* default value for web UI privacy setting (i.e. it will be overridden if they once updated)
...so, many users won't see an effect of it.
* Improve webfinger templates and make tests more flexible
* Clean up AS2 representation of actor
* Refactor outbox
* Create activities representation
* Add representations of followers/following collections, do not redirect /users/:username route if format is empty
* Remove unused translations
* ActivityPub endpoint for single statuses, add ActivityPub::TagManager for better
URL/URI generation
* Add ActivityPub::TagManager#to
* Represent all attachments as Document instead of Image/Video specifically
(Because for remote ones we may not know for sure)
Add mentions and hashtags representation to AP notes
* Add AP-resolvable hashtag URIs
* Use ActiveModelSerializers for ActivityPub
* Clean up unused translations
* Separate route for object and activity
* Adjust cc/to matrices
* Add to/cc to activities, ensure announce activity embeds target status and
not the wrapper status, add "id" to all collections
* fr.json: replace "silencer" with "masquer"
"Silencer" as a verb does not exist in French. A good and valid replacement is "masquer".
* FR translation: use "masquer" for "silence"
* Redesign the landing page, mount public timeline on it
* Adjust the standalone mounted component to the lacking of router
* Adjust auth layout pages to new design
* Fix tests
* Standalone public timeline polling every 5 seconds
* Remove now obsolete translations
* Add responsive design for new landing page
* Address reviews
* Add floating clouds behind frontpage form
* Use access token from public page when available
* Fix mentions and hashtags links, cursor on status content in standalone mode
* Add footer link to source code
* Fix errors on pages that don't embed the component, use classnames
* Fix tests
* Change anonymous autoPlayGif default to false
* When gif autoplay is disabled, hover to play
* Add option to hide the timeline preview
* Slightly improve alt layout
* Add elephant friend to new frontpage
* Display "back to mastodon" in place of "login" when logged in on frontpage
* Change polling time to 3s
* Added a success page to remote following
Includes follow-through links to web (the old redirect target) and back to the remote user's profile
* Use Account.new in spec instead of a fake with only id
(fixes spec)
* Fabricate(:account) over Account.new
* Remove self from the success text
(and all HTML with it)
* Changement de « Changement de mot de passe » en « Sécurité »
* Suppression de « (Two-factor auth) »
Change la valeur de la chaîne « two_factor_authentication » de « Identification à deux facteurs (Two-factor auth) » à « Identification à deux facteurs ».
La traduction anglaise entre parathentèse était redondante et gênait la lecture.
Change the value of the "two_factor_authentication" from "Identification à deux facteurs (Two-factor auth)" to "Identification à deux facteurs".
The English translation in brackets was superflous and was getting in the way of the reader.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était jusqu’ici incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Remplace « ... » par « … »
Remplace les séries de trois points par le caractère dédié « … » (U+2026).
Replace all the series of three dots by the dedicated character "…" (U+2026).
* Mise à jour
Crée config/locales/activerecord.fr.yml, ajoute de nouvelles chaînes et met à jour certains textes.
Les compteurs de caractères pour le pseudonyme et la biographie devrait maintenant pouvoir fonctionner même quand l’interface est en français.
Create config/locales/activerecord.fr.yml, add new strings et update some textes.
The caracters counters for the username and the biography should now work even when the interface is in French.
* Remplace « A » par « À »
Remplace « A » par « À » aux endroits où le mot est mal orthographié.
Replace "A" by "À" when the wrong word is used.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « certain » par « certain·e »
Harmonise la traduction en remplaçant « certain » par sa forme épicène.
Harmonize the translation by replacing "certain" (sure) by its epicene form.
* Corrige un angliscisme
Remplace « adresse e-mail » par « adresse électronique ».
Replace "adresse e-mail" (e-mail address) by "adresse électronique" (electronic address).
The old implementation sets default From address in mailers. It sets
the address from SMTP_FROM_ADDRESS, or notifications@localhost. The
behavior is occasionally undesired results.
In production environment, notifications@localhost is likely to be
incorrect.
In testing environment, the email address should not be varied by a
environment variable.
After appling this change,
In production environment, it will throw an exception when launching
Mastodon.
In testing environment, the address will be fixed with
notifications@localhost.
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
* Updated korean translation
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
* add missing locales for French translation
* accent "Media" in the front-end locales
* images => médias
* Change 'rapport' to 'signalement' in French locales to be more coherent
* fix typo
* remove duplicate EN locale
* translate missing locales
* update missing locale
* fix typo
* unify with "utilisateur⋅ice⋅s"
* address PR comments
* Fix#3910 - Require OTP authentication to disable 2FA. Also, remove ability
to generate new OTP backup codes *after* initial backup codes were handed
out during activation
* Restore recovery code re-generation
* Improve display of some 2FA elements
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
Webpack seems to fail to import `react-intl/locale-data/*.js` if those
files has been proceed by babel, and this also breaks applying our translation.
Note that this won't be a problem on English locale, because react-intl
includes it as default and works fine without manually added locale-data.
Also this issue seems to only occurs on production build, but I'm not sure
about reason.
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
Each of mute, favourite, reblog has been updated to:
- Have a separate controller with just a create and destroy action
- Preserve historical route names to not break the API
- Mild refactoring to break up long methods
* Add specs for api statuses routes
* Update favourited_by and reblogged_by api routes
* Move methods into new controllers
* Use load_accounts methods to simplify index actions
* Clean up load_accounts methods
* Clean up link header generation
* Check for link headers in specs
* Remove unused actions from api/v1/statuses controller
* Remove specs for moved actions
* i18n: updated Polish translation
* i18n: updated Polish translation
btw it would be nice to have master-based Mastodon instance (even isolated from others) to test translation.
* Redirect to streaming_api_base_url
When Rails receives a request to streaming API, it most likely
means that there is another host which is configured to respond
to it. This is to redirect clients to that host if
`STREAMING_API_BASE_URL` is set as another host.
* Use the new Ruby 1.9 hash syntax
* i18n Update : Add preference setting for delete toot modal
Adding a line for "Add preference setting for delete toot modal"
* i18n update for pin/unpin
Update to add two more translations
* i18n update to have the dates in plain occitan
* Removed the blank line
* %{selft} back in the translation
This implementation is a bit smaller and still has the following benefits:
* No need of app/javascript/packs/custom.js
For custom stylesheet, it typically has only
"require('../styles/custom.scss')" and is redundant.
* No need to extract vendor stylesheet to another asset
Extracting vendor stylesheet could be forgotten by developers who do not
use custom stylesheet.
* Update rails to version 5.1.1
* Run `rails app:update`
* Remove the override of polymorphic activity relationship
* Silence warning about otp_secret attribute being unknown to rails
* We will only introduce form_with where we want to use remote data
* Path should not be constructed manually. Use path.join to ensure compatibility.
* Path should not be constructed manually. Use path.join to ensure compatibility.
* Fix regexp.
* Fix my own stupidity.
I forgot to check outside my test script the regexp...
Because Nanobox doesn't run data components in the same container as the code, there are a few tweaks that need to be made in the configuration to get WebPack to work properly in development mode.
The same differences lead to needing to use `DATABASE_URL` by default in the `.env` file for Rails to work correctly.
Limitations of our `.env` loader for Node.js mean the `.env` file needs to be compiled everywhere in order to work, so we compile it in development, now, too. Also, all the `.env.production` tweaks have been consolidated into a single command.
Finally, since Nanobox actually creates the database when it sets up the database server, using the existence of the database alone to determine whether to migrate or setup is insufficient. So we add a condition to `rake db:migrate:setup` to check whether any migrations have run - if the database doesn't exist yet, `db:setup` will be called; if it does, but no migrations have been run, `db:migrate` and `db:seed` are called instead (the same basic idea as what `db:setup` does, but it skips `db:create`, which will only cause problems with an existing DB); otherwise, only `db:migrate` is called.
None of these changes should affect development, and all are designed not to interfere with existing behaviors in other environments.
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
* Enhance for the Chinese translation
* Add filtered_languages for Chinese Translation include CN/HK/TW for PR #3175
* i18n: Add some tags for Chinese translation
* i18n: Add some tags for Chinese translation
* Fix#2922 - Load stylesheet from "custom.css" entrypoint when present
This is pretty much the same way it worked as before, albeit with
having to create app/javascript/packs/custom.js with
require('../styles/custom.scss') (or whatever you want really), which
will be a blank slate for you to import whatever you want
* Remove old assets directory
* Extract font-awesome into common.css and always load it
* Update nl strings for 1.4
* Update nl strings for 1.4
* Update nl strings for 1.4
* nl strings (+1)
More new OTP strings will be translated another time
Eugen Rochko
m4sk1n
Quent-in
Naoki Kosaka
unarist
Sylvhem
spla
Masoud Abkenar
Komic
Daigo 3 Dango
Krzysztof Jurewicz
Jeroen
Yamagishi Kazutoshi
nullkal
asria-jp
Sorin Davidoi
Satoshi KOJIMA
Ratmir Karabut
Clworld
Petko Bordjukov
sdukhovni
Damien Erambert
lindwurm
abcang
Albert ARIBAUD
STJrInuyasha
のら
Sadiq Saif
Akihiko Odaki (@fn_aki@pawoo.net)
Gyuhwan Park
Minori Hiraoka
Nolan Lawson
Alda Marteau-Hardi
amazedkoumei
masarakki
Matt Jankowski
Naouak
Daniel Hunsaker
Atsushi Yamamoto
vidarlee
Ira
alpaca-tc