#!/bin/sh

PATH=/bin:/usr/bin:/sbin:/usr/sbin
export PATH

problem()
{
   printf "Encountered a problem!\n\nDropping you to a shell.\n\n"
   sh
}

no_device()
{
   printf "The device %s, which is supposed to contain the\n" $1
   printf "root file system, does not exist.\n"
   printf "Please fix this problem and exit this shell.\n\n"
}

no_mount()
{
   printf "Could not mount device %s\n" $1
   printf "Sleeping forever. Please reboot and fix the kernel command line.\n\n"
   printf "Maybe the device is formatted with an unsupported file system?\n\n"
   printf "Or maybe filesystem type autodetection went wrong, in which case\n"
   printf "you should add the rootfstype=... parameter to the kernel command line.\n\n"
   printf "Available partitions:\n"
}

do_mount_root()
{
   [ -n "$rootflags" ] && rootflags="$rootflags,"
   rootflags="$rootflags$ro"

   case "$root" in
      /dev/* ) device=$root ;;
      UUID=* ) eval $root; device="/dev/disk/by-uuid/$UUID"  ;;
      LABEL=*) eval $root; device="/dev/disk/by-label/$LABEL" ;;
      ""     ) echo "No root device specified." ; problem    ;;
   esac

   while [ ! -b "$device" ] ; do
       no_device $device
       problem
   done
   if  [ "$rootfstype" != "auto" ]; then
	rootfstype=`print_file_system $device`
   fi
   if [ "$rootfstype" == "no" ]; then
       no_mount $device
       cat /proc/partitions
       while true ; do sleep 10000 ; done
   fi
   [ -z "$overlayroot" ] && mountpoint=/.root  || mountpoint=/.roRoot
   mkdir -p $mountpoint
   if ! mount -n -t "$rootfstype" -o "$rootflags" "$device" $mountpoint ; then
       no_mount $device
       cat /proc/partitions
       while true ; do sleep 10000 ; done
   else
       log_info_msg "Mounting root file system ${root} in read-only mode..."
       evaluate_retval
   fi
   if [ -n "$overlayroot" ]; then
     overlaydevice=$overlayroot;         # /dev/mapper/<vg>/<lv>
     mkdir -p /mnt/OVL
     if ! mount -n "$overlaydevice" /mnt/OVL; then
       no_mount $overlaydevice
       cat /proc/partitions
       while true ; do sleep 10000 ; done
     else
       log_info_msg "Mounting overlay upper file system ${overlayroot}..."
       evaluate_retval
     fi
     mkdir -p /mnt/OVL/{upper,work}
     if ! mount -n -t overlay -o lowerdir=$mountpoint,upperdir=/mnt/OVL/upper,workdir=/mnt/OVL/work overlayrootfs /.root; then
       no_mount "overlayrootfs"
       cat /proc/partitions
       while true ; do sleep 10000 ; done
     else
       log_info_msg "Mounting overlay root filesystem..."
       evaluate_retval
     fi
   fi
}

do_install()
{
   echo "Start installation on $root "

   umount /.root

   ro="rw"

   mkdir /etc
   ln -s /proc/self/mounts /etc/mtab

   do_mount_root

   for DIR in home proc sys dev srv mnt
   do
     echo -n "."
     if [ ! -d /.root/$DIR ]; then
       mkdir /.root/$DIR
     fi
   done

   echo -n "."
   ln -s lib /.root/lib64

   if [ ! -d /.root/tmp ]; then
      echo -n "."
      mkdir  /.root/tmp
      chmod 1777 /.root/tmp
   fi
   for DIR in var run usr etc root lib sbin bin opt
   do
      echo -n "."
      if [ -f /.root/boot/$DIR.squashfs ]; then
         mkdir /DIR
         mount -o loop -t squashfs /.root/boot/$DIR.squashfs /DIR
         cp -a /DIR /.root/$DIR
         umount /DIR
         rm -r /DIR
         if [ "$DIR" == "root" ]; then
            chmod 750 /.root/root
         fi
      fi
   done
   # We need to check if entry exist in /etc/fstab
   if [ "`cat /.root/etc/fstab |sed "s/ \+/ /g"|sed "s/\t\+/ /g"|sed "s/ /:/g"|cut -d ":" -f1-2|grep $root|cut -d ":" -f2`" != "/" ]; then
      # blkid will tell us the file system
      TYPE=`print_file_system $root`
      echo -n "."
      echo "$root   /   $TYPE   defaults     0      1" >> /.root/etc/fstab
      do_stop_udev
   fi

   umount /.root

   ro="ro"

   do_mount_root
   echo "Successfully Installed on device $root" 
}

do_mount_in_ram()
{
	# squasfs files are in ${1} on the initrd
	# RW folders
	modprobe squashfs
	modprobe loop
	for DIR in var run etc root
	do
		if [ -f ${1}/$DIR.squashfs ];then
			mkdir /DIR
			[ "$verbose" == "no" ] || echo "mount -o loop -t squashfs ${1}/$DIR.squashfs /DIR"
			mount -o loop -t squashfs ${1}/$DIR.squashfs /DIR || problem
			mkdir -p /$DIR > /dev/null 2>&1
			cp -a /DIR/* /$DIR/ > /dev/null 2>&1
			umount /DIR
			rm -r /DIR
			if [ "$DIR" == "root" ]; then
				chmod 750 /root
			fi
		fi
	done
	# RO folders
	for DIR in usr lib sbin bin opt
	do
		if [ -f ${1}/$DIR.squashfs ];then
			mkdir /$DIR > /dev/null 2>&1
			[ "$verbose" == "no" ] || echo "mount -o loop -t squashfs ${1}/$DIR.squashfs /$DIR"
			mount -o loop -t squashfs ${1}/$DIR.squashfs /$DIR || problem
		fi
	done		
}

find_media() {
   EXPECT_LABEL="milis_calisan"
   for SYS in /sys/block/sd* /sys/block/sr* ; do
	   [ "$verbose" == "no" ] || echo "Looking in $SYS for media"
      if [ ! -d "$SYS" ]; then  continue; fi
      DEV=/dev/${SYS##*/}
      LABEL=`dd if=$DEV bs=1 skip=32808 count=32 2>/dev/null`
      if [ ${LABEL} == ${EXPECT_LABEL} ]  2>/dev/null ; then
	ln -s $DEV /dev/cdrom
	mkdir  -p /media/cdrom 2>/dev/null
	[ "$verbose" == "no" ] || echo "mount -n /dev/cdrom /media/cdrom"
	mount -n /dev/cdrom /media/cdrom
	[ -d /media/cdrom/depot ] && echo $DEV > /tmp/depot
	break
      fi
   done
}

MainLoop(){
   while [ ! -f /root/boot ];
   do
	[ "$verbose" == "no" ] || echo "Launch /etc/rc.d/init.d/milis-kur ..."
	/etc/rc.d/init.d/milis-kur || problem
   done
}

# **********
# Begin here
# **********

init=/sbin/init
overlayroot=
root=
rootdelay=
rootfstype=auto
ro="ro"
rootflags=
device=
verbose="no"

. /lib/lsb/init-functions

do_mount_virtualfs

read -r cmdline < /proc/cmdline

for param in $cmdline ; do
  case $param in
    init=*       ) init=${param#init=}               ;;
    root=*       ) root=${param#root=}               ;;
    rootdelay=*  ) rootdelay=${param#rootdelay=}     ;;
    overlayroot=*) overlayroot=${param#overlayroot=} ;;
    rootfstype=* ) rootfstype=${param#rootfstype=}   ;;
    rootflags=*  ) rootflags=${param#rootflags=}     ;;
    ro           ) ro="ro"                           ;;
    rw           ) ro="rw"                           ;;
    quiet        ) export verbose="no"               ;;
    testiso      ) export verbose="yes"              ;;
  esac
done

if [ -n "$rootdelay" ] && [ -f /sbin/mdadm ]; then 
  /sbin/mdadm --auto-detect
  ### First we activate lvm if possible
  if [ -f /sbin/lvm ]; then
    /sbin/lvm vgchange --ignorelockingfailure -ay
    if [ $? = 0 ]; then
       /sbin/lvm vgscan --ignorelockingfailure --mknodes
    fi
  fi
fi
if [ -d /lib/modules ]; then
	do_start_localnet
	do_start_udev
fi
if [ -n "$rootdelay" ] ; then
	[ "$verbose" == "no" ] || echo "... wait $rootdelay seconds"
	sleep "$rootdelay"
fi
if [ "$root" == "" ]; then
	if [ ! -f /etc/rc.d/init.d/milis-kur ]; then
		find_media
		if [ ! -L /dev/cdrom ]; then
			[ "$verbose" == "no" ] || echo "Media not found yet, trying again in 5 sec"
			sleep 5
			find_media
		fi
		if [ -d /media/cdrom/isolinux/boot ]; then
			do_mount_in_ram /media/cdrom/isolinux/boot
		else
			do_mount_in_ram /boot
		fi
	else
		do_mount_in_ram /boot
	fi
	if [ ! -f /etc/rc.d/init.d/milis-kur ]; then
		no_mount
		sh
	else
		if [ "$verbose" == "yes" ]; then
			echo "/etc/rc.d/init.d/milis-kur exit ..."
			ls -lt /etc/rc.d/init.d/milis-kur
		fi
	fi
#	TODO This doesn't works FIXME
	[ "$verbose" == "no" ] || echo "Stop udev ..."
	do_stop_udev
	 [ "$verbose" == "no" ] || echo "Start udev ..."
        do_start_udev
	[ "$verbose" == "no" ] || echo "Wait 5 second ..."
	[ "$verbose" == "no" ] || sleep 5
	[ "$verbose" == "no" ]  && clear
	MainLoop
	root=`cat /root/boot`
	[ "$verbose" == "no" ] || echo "Stop udev ..."
	do_stop_udev
	killall -w /sbin/udevd
	for DIR in usr lib sbin bin opt
	do
		[ "$verbose" == "no" ] || echo "umount /$DIR ..."
		umount /$DIR > /dev/null 2>&1
	done
fi

mkdir /.root
do_mount_root

if ! [ -d /.root/bin -a -d /.root/dev -a -d /.root/etc -a -d /.root/lib \
      -a -d /.root/sbin -a -d /.root/tmp -a -d /.root/root  -a -d /.root/proc \
      -a -d /.root/usr -a -d /.root/var  -a -d /.root/run -a -d /.root/sys ]; then
  do_install
fi
do_stop_udev
cd /.root
exec switch_root /.root "$init" "$@" > /dev/null 2>&1