#!/bin/sh #- # Copyright (c) 2012-2015 Juan Romero Pardines . # 2012 Dave Elusive . # 2016 milisarge . # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #- # Make sure we don't inherit these from env. SOURCE_DONE= HOSTNAME_DONE= KEYBOARD_DONE= LOCALE_DONE= TIMEZONE_DONE= ROOTPASSWORD_DONE= USERNAME_DONE= USERPASSWORD_DONE= BOOTLOADER_DONE= PARTITIONS_DONE= NETWORK_DONE= FILESYSTEMS_DONE= TARGETDIR=/mnt/hedef LOG=/dev/tty8 CONF_FILE=/tmp/.milis-kur.conf if [ ! -f $CONF_FILE ]; then touch -f $CONF_FILE fi ANSWER=$(mktemp -t miliskur-XXXXXXXX || exit 1) TARGET_FSTAB=$(mktemp -t miliskur-fstab-XXXXXXXX || exit 1) trap "DIE" INT TERM QUIT # disable printk if [ -w /proc/sys/kernel/printk ]; then echo 0 >/proc/sys/kernel/printk fi # Detect if this is an EFI system. if [ -e /sys/firmware/efi/systab ]; then EFI_SYSTEM=1 fi # dialog colors BLACK="\Z0" RED="\Z1" GREEN="\Z2" YELLOW="\Z3" BLUE="\Z4" MAGENTA="\Z5" CYAN="\Z6" WHITE="\Z7" BOLD="\Zb" REVERSE="\Zr" UNDERLINE="\Zu" RESET="\Zn" # Properties shared per widget. MENULABEL="${BOLD}Ok tuşlarıyla menüyü gezinme,TAB tuşuyla butonlar arası geçiş,ENTER tuşuyla seçim yapın.${RESET}" MENUSIZE="14 60 0" INPUTSIZE="8 60" MSGBOXSIZE="8 70" YESNOSIZE="$INPUTSIZE" WIDGET_SIZE="10 70" DIALOG() { rm -f $ANSWER dialog --colors --keep-tite --no-shadow --no-mouse \ --backtitle "${BOLD}${WHITE}Milis İşletim Sistemi kurulumu -- Milis 1.0 milisarge@gmail.com ${RESET}" \ --cancel-label "Geri" --aspect 20 "$@" 2>$ANSWER return $? } DIE() { rval=$1 [ -z "$rval" ] && rval=0 clear rm -f $ANSWER $TARGET_FSTAB # reenable printk if [ -w /proc/sys/kernel/printk ]; then echo 4 >/proc/sys/kernel/printk fi umount_filesystems exit $rval } set_option() { if grep -Eq "^${1}.*" $CONF_FILE; then sed -i -e "/^${1}.*/d" $CONF_FILE fi echo "${1} ${2}" >>$CONF_FILE } get_option() { echo $(grep -E "^${1}.*" $CONF_FILE|sed -e "s|${1}||") } show_disks() { local dev size sectorsize gbytes # IDE for dev in $(ls /sys/block|grep -E '^hd'); do if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then # Find out nr sectors and bytes per sector; echo "/dev/$dev" size=$(cat /sys/block/$dev/size) sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size) gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))" echo "size:${gbytes}GB;sector_size:$sectorsize" fi done # SATA/SCSI and Virtual disks (virtio) for dev in $(ls /sys/block|grep -E '^([sv]|xv)d|mmcblk'); do echo "/dev/$dev" size=$(cat /sys/block/$dev/size) sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size) gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))" echo "size:${gbytes}GB;sector_size:$sectorsize" done # cciss(4) devices for dev in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]$'); do echo "/dev/cciss/$dev" size=$(cat /sys/block/cciss\!$dev/size) sectorsize=$(cat /sys/block/cciss\!$dev/queue/hw_sector_size) gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))" echo "size:${gbytes}GB;sector_size:$sectorsize" done } show_partitions() { local dev fstype fssize p part set -- $(show_disks) while [ $# -ne 0 ]; do disk=$(basename $1) shift 2 # ATA/SCSI/SATA for p in /sys/block/$disk/$disk*; do if [ -d $p ]; then part=$(basename $p) fstype=$(lsblk -nfr /dev/$part|awk '{print $2}'|head -1) [ "$fstype" = "iso9660" ] && continue [ "$fstype" = "crypto_LUKS" ] && continue [ "$fstype" = "LVM2_member" ] && continue fssize=$(lsblk -nr /dev/$part|awk '{print $4}'|head -1) echo "/dev/$part" echo "size:${fssize:-unknown};fstype:${fstype:-none}" fi done done # Software raid (md) for p in $(ls -d /dev/md* 2>/dev/null|grep '[0-9]'); do part=$(basename $p) if cat /proc/mdstat|grep -qw $part; then fstype=$(lsblk -nfr /dev/$part|awk '{print $2}') [ "$fstype" = "crypto_LUKS" ] && continue [ "$fstype" = "LVM2_member" ] && continue fssize=$(lsblk -nr /dev/$part|awk '{print $4}') echo "$p" echo "size:${fssize:-unknown};fstype:${fstype:-none}" fi done # cciss(4) devices for part in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]p[0-9]+'); do fstype=$(lsblk -nfr /dev/cciss/$part|awk '{print $2}') [ "$fstype" = "crypto_LUKS" ] && continue [ "$fstype" = "LVM2_member" ] && continue fssize=$(lsblk -nr /dev/cciss/$part|awk '{print $4}') echo "/dev/cciss/$part" echo "size:${fssize:-unknown};fstype:${fstype:-none}" done if [ -e /sbin/lvs ]; then # LVM lvs --noheadings|while read lvname vgname perms size; do echo "/dev/mapper/${vgname}-${lvname}" echo "size:${size};fstype:lvm" done fi } menu_filesystems() { local dev fstype fssize mntpoint reformat while true; do DIALOG --title " Ayarlamak için bir disk bölümü seçiniz. " --menu "$MENULABEL" \ ${MENUSIZE} $(show_partitions) [ $? -ne 0 ] && return dev=$(cat $ANSWER) DIALOG --title " $dev için bir dosya sistemi seçiniz. " \ --menu "$MENULABEL" ${MENUSIZE} \ "btrfs" "Oracle's Btrfs" \ "ext2" "Linux ext2 (no journaling)" \ "ext3" "Linux ext3 (journal)" \ "ext4" "Linux ext4 (journal)" \ "f2fs" "Flash-Friendly Filesystem" \ "swap" "Linux swap" \ "vfat" "FAT32" \ "xfs" "SGI's XFS" if [ $? -eq 0 ]; then fstype=$(cat $ANSWER) else continue fi if [ "$fstype" != "swap" ]; then DIALOG --inputbox " $dev için bir bağlama noktası seçiniz:" ${INPUTSIZE} if [ $? -eq 0 ]; then mntpoint=$(cat $ANSWER) elif [ $? -eq 1 ]; then continue fi else mntpoint=swap fi DIALOG --yesno " $dev üzerinde yeni bir dosya sistemi oluşturmak istiyor musunuz?" ${YESNOSIZE} if [ $? -eq 0 ]; then reformat=1 elif [ $? -eq 1 ]; then reformat=0 else continue fi fssize=$(lsblk -nr $dev|awk '{print $4}') set -- "$fstype" "$fssize" "$mntpoint" "$reformat" if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then local bdev=$(basename $dev) local ddev=$(basename $(dirname $dev)) if [ "$ddev" != "dev" ]; then sed -i -e "/^MOUNTPOINT \/dev\/${ddev}\/${bdev}.*/d" $CONF_FILE else sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $CONF_FILE fi echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$CONF_FILE fi done } menu_partitions() { DIALOG --title " Bölümleme yapmak için bir disk seçiniz. " \ --menu "$MENULABEL" ${MENUSIZE} $(show_disks) if [ $? -eq 0 ]; then local device=$(cat $ANSWER) DIALOG --title "Modify Partition Table on $device" --msgbox "\n ${BOLD}cfdisk will be executed in disk $device.${RESET}\n\n For BIOS systems, MBR or GPT partition tables are supported.\n To use GPT on PC BIOS systems an empty partition of 1MB must be added\n at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n ${BOLD}NOTE: you don't need this on EFI systems.${RESET}\n\n For EFI systems GPT is mandatory and a FAT32 partition with at least\n 100MB must be created with the TOGGLE \`boot', this will be used as\n EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n At least 1 partitions is required for the rootfs (/).\n For swap, RAM*2 must be really enough. For / 600MB are required.\n\n ${BOLD}WARNING: /usr is not supported as a separate partition.${RESET}\n ${RESET}\n" 18 80 if [ $? -eq 0 ]; then while true; do clear; cfdisk $device; PARTITIONS_DONE=1 break done else return fi fi } menu_keymap() { local _keymaps="$(find /lib/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort)" local _KEYMAPS= for f in ${_keymaps}; do _KEYMAPS="${_KEYMAPS} ${f} -" done while true; do DIALOG --title " Select your keymap " --menu "$MENULABEL" 14 70 14 ${_KEYMAPS} if [ $? -eq 0 ]; then set_option KEYMAP "$(cat $ANSWER)" loadkeys "$(cat $ANSWER)" KEYBOARD_DONE=1 break else return fi done } set_keymap() { local KEYMAP=$(get_option KEYMAP) if [ -f /etc/vconsole.conf ]; then sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/vconsole.conf else sed -i -e "s|#\?KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/rc.conf fi } menu_locale() { local _locales="$(locale --all-locales |awk '{print $1}'|sed -e 's/^#//')" local _LOCALES= for f in ${_locales}; do _LOCALES="${_LOCALES} ${f} -" done while true; do DIALOG --title " yerel bilgi seçimi " --menu "$MENULABEL" 14 70 14 ${_LOCALES} if [ $? -eq 0 ]; then set_option LOCALE "$(cat $ANSWER)" LOCALE_DONE=1 break else return fi done } set_locale() { if [ -f $TARGETDIR/etc/default/libc-locales ]; then #yerelleştirme ayarı yapılacak bashrc de değişim olacak. local LOCALE=$(get_option LOCALE) sed -i -e "s|LANG=.*|LANG=$LOCALE|g" $TARGETDIR/etc/locale.conf # Uncomment locale from /etc/default/libc-locales and regenerate it. sed -e "/${LOCALE}/s/^\#//" -i $TARGETDIR/etc/default/libc-locales fi } menu_timezone() { local _tzones="$(cd /usr/share/zoneinfo; find Africa/ America/ Antarctica/ Arctic/ Asia/ Atlantic/ Australia/ Europe/ Indian/ Pacific/ posix/ -type f | sort)" local _TIMEZONES= for f in ${_tzones}; do _TIMEZONES="${_TIMEZONES} ${f} -" done while true; do DIALOG --title " Select your timezone " --menu "$MENULABEL" 14 70 14 ${_TIMEZONES} if [ $? -eq 0 ]; then set_option TIMEZONE "$(cat $ANSWER)" TIMEZONE_DONE=1 break else return fi done } set_timezone() { local TIMEZONE="$(get_option TIMEZONE)" sed -i -e "s|#TIMEZONE=.*|TIMEZONE=$TIMEZONE|g" $TARGETDIR/etc/rc.conf } menu_hostname() { while true; do DIALOG --inputbox "Set the machine hostname:" ${INPUTSIZE} if [ $? -eq 0 ]; then set_option HOSTNAME "$(cat $ANSWER)" HOSTNAME_DONE=1 break else return fi done } set_hostname() { echo $(get_option HOSTNAME) > $TARGETDIR/etc/hostname } menu_rootpassword() { local _firstpass= _secondpass= _desc= while true; do if [ -n "${_firstpass}" ]; then _desc="Enter the root password again (password won't be displayed)" else _desc="Enter the root password (password won't be displayed)" fi DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE} if [ $? -eq 0 ]; then if [ -z "${_firstpass}" ]; then _firstpass="$(cat $ANSWER)" else _secondpass="$(cat $ANSWER)" fi if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then if [ "${_firstpass}" != "${_secondpass}" ]; then DIALOG --infobox "Passwords do not match! please reenter it again" 6 80 unset _firstpass _secondpass sleep 2 && continue fi set_option ROOTPASSWORD "${_firstpass}" ROOTPASSWORD_DONE=1 break fi else return fi done } set_rootpassword() { echo "root:$(get_option ROOTPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512 } menu_useraccount() { local _firstpass= _secondpass= _desc= while true; do DIALOG --inputbox "Birincil kullanıcı adını seçin:" ${INPUTSIZE} "miliskuv" if [ $? -eq 0 ]; then set_option USERNAME "$(cat $ANSWER)" USERNAME_DONE=1 break else return fi done while true; do if [ -n "${_firstpass}" ]; then _desc="Enter the password for '$(get_option USERNAME)' again (password won't be displayed)" else _desc="Enter the password for '$(get_option USERNAME)' (password won't be displayed)" fi DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE} if [ $? -eq 0 ]; then if [ -z "${_firstpass}" ]; then _firstpass="$(cat $ANSWER)" else _secondpass="$(cat $ANSWER)" fi if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then if [ "${_firstpass}" != "${_secondpass}" ]; then DIALOG --infobox "Passwords do not match! please reenter it again" 6 80 unset _firstpass _secondpass sleep 2 && continue fi set_option USERPASSWORD "${_firstpass}" USERPASSWORD_DONE=1 break fi else return fi done } set_useraccount() { useradd -R $TARGETDIR -m -G wheel,audio,video,floppy,cdrom,optical,kvm,xbuilder \ "$(get_option USERNAME)" echo "$(get_option USERNAME):$(get_option USERPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512 } menu_bootloader() { while true; do DIALOG --title " Select the disk to install the bootloader" \ --menu "$MENULABEL" ${MENUSIZE} $(show_disks) none "Manage bootloader otherwise" if [ $? -eq 0 ]; then set_option BOOTLOADER "$(cat $ANSWER)" BOOTLOADER_DONE=1 break else return fi done } set_bootloader() { local dev=$(get_option BOOTLOADER) grub_args= if [ "$dev" = "none" ]; then return; fi # Check if it's an EFI system via efivars module. if [ -n "$EFI_SYSTEM" ]; then grub_args="--target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=milis_grub --recheck" fi echo "Running grub-install $grub_args $dev..." >$LOG chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to install GRUB to $dev!\nCheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi echo "Running grub-mkconfig on $TARGETDIR..." >$LOG chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR${RESET}: \ failed to run grub-mkconfig!\nCheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi } test_network() { #ağ testi if [ $? -eq 0 ]; then DIALOG --msgbox "Ağ düzgün çalışıyor!" ${MSGBOXSIZE} NETWORK_DONE=1 return 1 fi DIALOG --msgbox "Ağda sorun var,gerekli ayarları yapınız." ${MSGBOXSIZE} } configure_wifi() { local dev="$1" ssid enc pass _wpasupconf=/etc/wpa_supplicant/wpa_supplicant.conf DIALOG --form "Wireless configuration for ${dev}\n(encryption type: wep or wpa)" 0 0 0 \ "SSID:" 1 1 "" 1 16 30 0 \ "Encryption:" 2 1 "" 2 16 4 3 \ "Password:" 3 1 "" 3 16 50 0 || return 1 set -- $(cat $ANSWER) ssid="$1"; enc="$2"; pass="$3"; if [ -z "$ssid" ]; then DIALOG --msgbox "Invalid SSID." ${MSGBOXSIZE} return 1 elif [ -z "$enc" -o "$enc" != "wep" -a "$enc" != "wpa" ]; then DIALOG --msgbox "Invalid encryption type (possible values: wep or wpa)." ${MSXBOXSIZE} return 1 elif [ -z "$pass" ]; then DIALOG --msgbox "Invalid AP password." ${MSGBOXSIZE} fi rm -f ${_wpasupconf%.conf}-${dev}.conf cp -f ${_wpasupconf} ${_wpasupconf%.conf}-${dev}.conf if [ "$enc" = "wep" ]; then echo "network={" >> ${_wpasupconf%.conf}-${dev}.conf echo " ssid=\"$ssid\"" >> ${_wpasupconf%.conf}-${dev}.conf echo " wep_key0=\"$pass\"" >> ${_wpasupconf%.conf}-${dev}.conf echo " wep_tx_keyidx=0" >> ${_wpasupconf%.conf}-${dev}.conf echo " auth_alg=SHARED" >> ${_wpasupconf%.conf}-${dev}.conf echo "}" >> ${_wpasupconf%.conf}-${dev}.conf else wpa_passphrase "$ssid" "$pass" >> ${_wpasupconf%.conf}-${dev}.conf fi configure_net_dhcp $dev return $? } configure_net() { local dev="$1" rval DIALOG --yesno "Do you want to use DHCP for $dev?" ${YESNOSIZE} rval=$? if [ $rval -eq 0 ]; then configure_net_dhcp $dev elif [ $rval -eq 1 ]; then configure_net_static $dev fi } iface_setup() { ip addr show dev $1|grep -q 'inet ' return $? } configure_net_dhcp() { local dev="$1" iface_setup $dev if [ $? -eq 1 ]; then dhcpcd -t 10 -w -4 -L $dev -e "wpa_supplicant_conf=/etc/wpa_supplicant/wpa_supplicant-${dev}.conf" 2>&1 | tee $LOG | \ DIALOG --progressbox "Initializing $dev via DHCP..." ${WIDGET_SIZE} if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to run dhcpcd. See $LOG for details." ${MSGBOXSIZE} return 1 fi iface_setup $dev if [ $? -eq 1 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} DHCP request failed for $dev. Check $LOG for errors." ${MSGBOXSIZE} return 1 fi fi test_network if [ $? -eq 1 ]; then set_option NETWORK "${dev} dhcp" fi } configure_net_static() { local ip gw dns1 dns2 dev=$1 DIALOG --form "Static IP configuration for $dev:" 0 0 0 \ "IP address:" 1 1 "192.168.0.2" 1 21 20 0 \ "Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \ "DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \ "DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1 set -- $(cat $ANSWER) ip=$1; gw=$2; dns1=$3; dns2=$4 echo "running: ip link set dev $dev up" >$LOG ip link set dev $dev up >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to bring $dev interface." ${MSGBOXSIZE} return 1 fi echo "running: ip addr add $ip dev $dev" ip addr add $ip dev $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to set ip to the $dev interface." ${MSGBOXSIZE} return 1 fi ip route add $gw dev $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to setup your gateway." ${MSGBOXSIZE} return 1 fi echo "nameserver $dns1" >/etc/resolv.conf echo "nameserver $dns2" >>/etc/resolv.conf test_network if [ $? -eq 1 ]; then set_option NETWORK "${dev} static $ip $gw $dns1 $dns2" fi } menu_network() { local dev addr f DEVICES for f in $(ls /sys/class/net); do [ "$f" = "lo" ] && continue addr=$(cat /sys/class/net/$f/address) DEVICES="$DEVICES $f $addr" done DIALOG --title " Select the network interface to configure " \ --menu "$MENULABEL" ${MENUSIZE} ${DEVICES} if [ $? -eq 0 ]; then dev=$(cat $ANSWER) if $(echo $dev|egrep -q "^wl.*" 2>/dev/null); then configure_wifi $dev else configure_net $dev fi fi } validate_filesystems() { local mnts dev size fstype mntpt mkfs rootfound fmt local usrfound efi_system_partition unset TARGETFS mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; size=$4; mntpt="$5"; mkfs=$6 shift 6 if [ "$mntpt" = "/" ]; then rootfound=1 elif [ "$mntpt" = "/usr" ]; then usrfound=1 elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then efi_system_partition=1 fi if [ "$mkfs" -eq 1 ]; then fmt="NEW FILESYSTEM: " fi if [ -z "$TARGETFS" ]; then TARGETFS="${fmt}$dev ($size) mounted on $mntpt as ${fstype}\n" else TARGETFS="${TARGETFS}${fmt}${dev} ($size) mounted on $mntpt as ${fstype}\n" fi done if [ -z "$rootfound" ]; then DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \ kökdizin (/) için bağlama noktası ayarlı değil." ${MSGBOXSIZE} return 1 elif [ -n "$usrfound" ]; then DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \ /usr bağlama noktası desteklenmiyor,siliniz." ${MSGBOXSIZE} return 1 elif [ -n "$EFI_SYSTEM" -a -z "$efi_system_partition" ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ The EFI System Partition has not yet been configured, please create it\n as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${MSGBOXSIZE} fi FILESYSTEMS_DONE=1 } create_filesystems() { local mnts dev mntpt fstype fspassno mkfs size rv uuid mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; mntpt="$5"; mkfs=$6 shift 6 # swap partitions if [ "$fstype" = "swap" ]; then swapoff $dev >/dev/null 2>&1 if [ "$mkfs" -eq 1 ]; then mkswap $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to create swap on ${dev}!\ncheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi fi swapon $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to activate swap on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi # Add entry for target fstab uuid=$(blkid -o value -s UUID "$dev") echo "UUID=$uuid none swap sw 0 0" >>$TARGET_FSTAB continue fi if [ "$mkfs" -eq 1 ]; then case "$fstype" in btrfs) MKFS="mkfs.btrfs -f"; modprobe btrfs >$LOG 2>&1;; ext2) MKFS="mke2fs -F"; modprobe ext2 >$LOG 2>&1;; ext3) MKFS="mke2fs -F -j"; modprobe ext3 >$LOG 2>&1;; ext4) MKFS="mke2fs -F -t ext4"; modprobe ext4 >$LOG 2>&1;; f2fs) MKFS="mkfs.f2fs"; modprobe f2fs >$LOG 2>&1;; vfat) MKFS="mkfs.vfat -F32"; modprobe vfat >$LOG 2>&1;; xfs) MKFS="mkfs.xfs -f"; modprobe xfs >$LOG 2>&1;; esac DIALOG --infobox "Creating filesystem $fstype on $dev for $mntpt ..." 8 60 echo "Running $MKFS $dev..." >$LOG $MKFS $dev >$LOG 2>&1; rv=$? if [ $rv -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \ $dev $fstype dosyasistemi oluşturma esnasında hata oluştu!\nayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE} DIE 1 fi fi # Mount rootfs the first one. [ "$mntpt" != "/" ] && continue mkdir -p $TARGETDIR echo " $dev noktası $mntpt a bağlanıyor($fstype)..." >$LOG mount -t $fstype $dev $TARGETDIR >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ $dev bağlanması ${mntpt} esnasında hata oluştu! ayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE} DIE 1 fi # Add entry to target fstab uuid=$(blkid -o value -s UUID "$dev") if [ "$fstype" = "f2fs" ]; then fspassno=0 else fspassno=1 fi echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB done # mount all filesystems in target rootfs mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; mntpt="$5" shift 6 [ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue mkdir -p ${TARGETDIR}${mntpt} echo "Mounting $dev on $mntpt ($fstype)..." >$LOG mount -t $fstype $dev ${TARGETDIR}${mntpt} >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \ failed to mount $dev on $mntpt! check $LOG for errors." ${MSGBOXSIZE} DIE fi # Add entry to target fstab uuid=$(blkid -o value -s UUID "$dev") echo "UUID=$uuid $mntpt $fstype defaults 0 2" >>$TARGET_FSTAB done } mount_filesystems() { for f in sys proc dev; do [ ! -d $TARGETDIR/$f ] && mkdir $TARGETDIR/$f echo "Mounting $TARGETDIR/$f..." >$LOG mount --bind /$f $TARGETDIR/$f >$LOG 2>&1 done } umount_filesystems() { local f for f in sys/fs/fuse/connections sys proc dev; do echo "Unmounting $TARGETDIR/$f..." >$LOG umount $TARGETDIR/$f >$LOG 2>&1 done local mnts="$(grep -E '^MOUNTPOINT.*$' $CONF_FILE)" set -- ${mnts} while [ $# -ne 0 ]; do local dev=$2; local fstype=$3; local mntpt=$5 shift 6 if [ "$fstype" = "swap" ]; then echo "Disabling swap space on $dev..." >$LOG swapoff $dev >$LOG 2>&1 continue fi if [ "$mntpt" != "/" ]; then echo "Unmounting $TARGETDIR/$mntpt..." >$LOG umount $TARGETDIR/$mntpt >$LOG 2>&1 fi done echo "Unmounting $TARGETDIR..." >$LOG umount $TARGETDIR >$LOG 2>&1 } copy_rootfs() { DIALOG --title "Ayrıntı için $LOG a bakınız" \ --infobox "Çalışan ortam hedef noktaya kopyalanıyor,lütfen bekleyiniz ..." 4 60 LANG=C cp -axvnu / $TARGETDIR >$LOG 2>&1 if [ $? -ne 0 ]; then DIE 1 fi } install_packages() { local _grub= _syspkg= if [ -n "$EFI_SYSTEM" ]; then _grub="grub-x86_64-efi" else _grub="grub" fi _syspkg="base-system" #temel sistem paketleri kurulacak } enable_dhcpd() { echo "dhcp hedef kurulum noktasında ayarlanacak" } menu_install() { # Don't continue if filesystems are not ready. validate_filesystems || return 1 #şimdilik kapalı ROOTPASSWORD_DONE=1 #"$(get_option ROOTPASSWORD)" BOOTLOADER_DONE=1 #"$(get_option BOOTLOADER)" if [ -z "$FILESYSTEMS_DONE" ]; then DIALOG --msgbox "${BOLD}Gerekli dosya sistemi ayarlı değil, \ gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE} return 1 elif [ -z "$ROOTPASSWORD_DONE" ]; then DIALOG --msgbox "${BOLD}Root şifresi ayarlı değil, \ gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE} return 1 elif [ -z "$BOOTLOADER_DONE" ]; then DIALOG --msgbox "${BOLD}Bootloader için disk ayarlı değil, \ gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE} return 1 fi DIALOG --yesno "${BOLD}Şu işlemler uygulanacak:${RESET}\n\n ${BOLD}${TARGETFS}${RESET}\n ${BOLD}${RED}UYARI: YENİ DOSYA SİSTEMİ İÇİN HEDEF BÖLÜMDEKİ TÜM DATA SİLİNECEK.${RESET}\n\n ${BOLD}Devam etmek istiyor musunuz?${RESET}" 20 80 || return unset TARGETFS # Create and mount filesystems create_filesystems copy_rootfs rm -r -f $TARGETDIR/tmp/* DIALOG --title "Ayrıntılar için $LOG kontrol ediniz." \ --infobox "Hedef için başlatıcı ayarı yapılıyor ..." 4 60 echo "Hedef için başlatıcı ayarı yapılıyor ..." >$LOG # mount required fs mount_filesystems chroot $TARGETDIR dracut --no-hostonly --add-drivers "ahci" --force >>$LOG 2>&1 DIALOG --infobox "Kurulum ayarları uygulanıyor..." 4 60 # copy target fstab. install -Dm644 $TARGET_FSTAB $TARGETDIR/etc/fstab # Mount /tmp as tmpfs. echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >> $TARGETDIR/etc/fstab # set up keymap, locale, timezone, hostname and root passwd.-simdilik kapali #set_keymap #set_locale #set_timezone #set_hostname #set_rootpassword #set_useraccount # install bootloader.-simdilik kapali #set_bootloader sync && sync && sync # unmount all filesystems. umount_filesystems # installed successfully. DIALOG --yesno "${BOLD}Milis İşletim Sistemi başarıyla kuruldu!${RESET}\n Bilgisayar yeniden başlatılsın mı?" ${YESNOSIZE} if [ $? -eq 0 ]; then shutdown -r now else return fi } menu_source() { local src= DIALOG --title " Select installation source " \ --menu "$MENULABEL" 8 70 0 \ "Local" "Packages from ISO image" \ "Network" "Packages from official remote reposity" case "$(cat $ANSWER)" in "Local") src="local";; "Network") src="net"; if [ -z "$NETWORK_DONE" ]; then menu_network; fi;; *) return 1;; esac SOURCE_DONE=1 set_option SOURCE $src } menu() { if [ -z "$DEFITEM" ]; then DEFITEM="Keyboard" fi DIALOG --default-item $DEFITEM \ --extra-button --extra-label "Ayarlar" \ --title " Milis İşletim Sistemi kurulumu menüsü " \ --menu "$MENULABEL" 10 70 0 \ "Dosyasistemi" "Dosya sistemlerini ayarlama,gerekli bağlamalar" \ "Kur" "Kayıt edilen ayarlarla kuruluma başlanması" \ "Çıkış" "Kurulumdan çıkış" if [ $? -eq 3 ]; then # Show settings cp $CONF_FILE /tmp/conf_hidden.$$; sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$ DIALOG --title "Kurulum için ayarlar kayıt edildi." --textbox /tmp/conf_hidden.$$ 14 60 rm /tmp/conf_hidden.$$ return fi case $(cat $ANSWER) in "Dosyasistemi") menu_filesystems && [ -n "$FILESYSTEMS_DONE" ] && DEFITEM="Kur";; "Kur") menu_install;; "Çıkış") DIE;; *) DIALOG --yesno "Kurulumu iptal et?" ${YESNOSIZE} && DIE esac } if [ ! -x /bin/dialog ]; then echo "ERROR: missing dialog command, exiting..." exit 1 fi # # main() # DIALOG --title "${BOLD}${RED} Milis İşletim Sistemi Hakkında ... ${RESET}" --msgbox "\n Milis işletim sistemi kurulumuna hoşgeldiniz. Milis sıfırdan kaynak kodlardan oluşturulan yerli bağımsız bir işletim sistemidir.Kendine özgü mps isimli paket yöneticisine sahiptir.\ Mps ile hem derleme talimatları kullanılarak paket üretilebilir hem de direk ikili paketlerin kurulumu sağlanır. irtibat için ${BOLD}#milisarge on irc.freenode.org${RESET}.\n\n ${BOLD}milisarge@gmail.com${RESET}\n\n" 16 80 while true; do menu done exit 0 # vim: set ts=4 sw=4 et: