diff --git a/bin/milis-kur b/bin/milis-kur
new file mode 100755
index 000000000..05da78d22
--- /dev/null
+++ b/bin/milis-kur
@@ -0,0 +1,996 @@
+#!/bin/sh
+#-
+# Copyright (c) 2012-2015 Juan Romero Pardines <xtraeme@voidlinux.eu>.
+#               2012 Dave Elusive <davehome@redthumb.info.tm>.
+#				2016 milisarge <milisarge@gmail.com>.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#-
+
+# Make sure we don't inherit these from env.
+SOURCE_DONE=
+HOSTNAME_DONE=
+KEYBOARD_DONE=
+LOCALE_DONE=
+TIMEZONE_DONE=
+ROOTPASSWORD_DONE=
+USERNAME_DONE=
+USERPASSWORD_DONE=
+BOOTLOADER_DONE=
+PARTITIONS_DONE=
+NETWORK_DONE=
+FILESYSTEMS_DONE=
+
+TARGETDIR=/mnt/hedef
+LOG=/dev/tty8
+CONF_FILE=/tmp/.milis-kur.conf
+if [ ! -f $CONF_FILE ]; then
+    touch -f $CONF_FILE
+fi
+ANSWER=$(mktemp -t miliskur-XXXXXXXX || exit 1)
+TARGET_FSTAB=$(mktemp -t miliskur-fstab-XXXXXXXX || exit 1)
+
+trap "DIE" INT TERM QUIT
+
+# disable printk
+if [ -w /proc/sys/kernel/printk ]; then
+    echo 0 >/proc/sys/kernel/printk
+fi
+
+# Detect if this is an EFI system.
+if [ -e /sys/firmware/efi/systab ]; then
+    EFI_SYSTEM=1
+fi
+
+# dialog colors
+BLACK="\Z0"
+RED="\Z1"
+GREEN="\Z2"
+YELLOW="\Z3"
+BLUE="\Z4"
+MAGENTA="\Z5"
+CYAN="\Z6"
+WHITE="\Z7"
+BOLD="\Zb"
+REVERSE="\Zr"
+UNDERLINE="\Zu"
+RESET="\Zn"
+
+# Properties shared per widget.
+MENULABEL="${BOLD}Ok tuşlarıyla menüyü gezinme,TAB tuşuyla butonlar arası geçiş,ENTER tuşuyla seçim yapın.${RESET}"
+MENUSIZE="14 60 0"
+INPUTSIZE="8 60"
+MSGBOXSIZE="8 70"
+YESNOSIZE="$INPUTSIZE"
+WIDGET_SIZE="10 70"
+
+DIALOG() {
+    rm -f $ANSWER
+    dialog --colors --keep-tite --no-shadow --no-mouse \
+        --backtitle "${BOLD}${WHITE}Milis İşletim Sistemi kurulumu -- Milis 1.0 milisarge@gmail.com ${RESET}" \
+        --cancel-label "Geri" --aspect 20 "$@" 2>$ANSWER
+    return $?
+}
+
+DIE() {
+    rval=$1
+    [ -z "$rval" ] && rval=0
+    clear
+    rm -f $ANSWER $TARGET_FSTAB
+    # reenable printk
+    if [ -w /proc/sys/kernel/printk ]; then
+        echo 4 >/proc/sys/kernel/printk
+    fi
+    umount_filesystems
+    exit $rval
+}
+
+set_option() {
+    if grep -Eq "^${1}.*" $CONF_FILE; then
+        sed -i -e "/^${1}.*/d" $CONF_FILE
+    fi
+    echo "${1} ${2}" >>$CONF_FILE
+}
+
+get_option() {
+    echo $(grep -E "^${1}.*" $CONF_FILE|sed -e "s|${1}||")
+}
+
+show_disks() {
+    local dev size sectorsize gbytes
+
+    # IDE
+    for dev in $(ls /sys/block|grep -E '^hd'); do
+        if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then
+            # Find out nr sectors and bytes per sector;
+            echo "/dev/$dev"
+            size=$(cat /sys/block/$dev/size)
+            sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
+            gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+            echo "size:${gbytes}GB;sector_size:$sectorsize"
+        fi
+    done
+    # SATA/SCSI and Virtual disks (virtio)
+    for dev in $(ls /sys/block|grep -E '^([sv]|xv)d|mmcblk'); do
+        echo "/dev/$dev"
+        size=$(cat /sys/block/$dev/size)
+        sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
+        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+        echo "size:${gbytes}GB;sector_size:$sectorsize"
+    done
+    # cciss(4) devices
+    for dev in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]$'); do
+        echo "/dev/cciss/$dev"
+        size=$(cat /sys/block/cciss\!$dev/size)
+        sectorsize=$(cat /sys/block/cciss\!$dev/queue/hw_sector_size)
+        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+        echo "size:${gbytes}GB;sector_size:$sectorsize"
+    done
+}
+
+show_partitions() {
+    local dev fstype fssize p part
+
+    set -- $(show_disks)
+    while [ $# -ne 0 ]; do
+        disk=$(basename $1)
+        shift 2
+        # ATA/SCSI/SATA
+        for p in /sys/block/$disk/$disk*; do
+            if [ -d $p ]; then
+                part=$(basename $p)
+                fstype=$(lsblk -nfr /dev/$part|awk '{print $2}'|head -1)
+                [ "$fstype" = "iso9660" ] && continue
+                [ "$fstype" = "crypto_LUKS" ] && continue
+                [ "$fstype" = "LVM2_member" ] && continue
+                fssize=$(lsblk -nr /dev/$part|awk '{print $4}'|head -1)
+                echo "/dev/$part"
+                echo "size:${fssize:-unknown};fstype:${fstype:-none}"
+            fi
+        done
+    done
+    # Software raid (md)
+    for p in $(ls -d /dev/md* 2>/dev/null|grep '[0-9]'); do
+        part=$(basename $p)
+        if cat /proc/mdstat|grep -qw $part; then
+            fstype=$(lsblk -nfr /dev/$part|awk '{print $2}')
+            [ "$fstype" = "crypto_LUKS" ] && continue
+            [ "$fstype" = "LVM2_member" ] && continue
+            fssize=$(lsblk -nr /dev/$part|awk '{print $4}')
+            echo "$p"
+            echo "size:${fssize:-unknown};fstype:${fstype:-none}"
+        fi
+    done
+    # cciss(4) devices
+    for part in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]p[0-9]+'); do
+        fstype=$(lsblk -nfr /dev/cciss/$part|awk '{print $2}')
+        [ "$fstype" = "crypto_LUKS" ] && continue
+        [ "$fstype" = "LVM2_member" ] && continue
+        fssize=$(lsblk -nr /dev/cciss/$part|awk '{print $4}')
+        echo "/dev/cciss/$part"
+        echo "size:${fssize:-unknown};fstype:${fstype:-none}"
+    done
+    if [ -e /sbin/lvs ]; then
+        # LVM
+        lvs --noheadings|while read lvname vgname perms size; do
+            echo "/dev/mapper/${vgname}-${lvname}"
+            echo "size:${size};fstype:lvm"
+        done
+    fi
+}
+
+menu_filesystems() {
+    local dev fstype fssize mntpoint reformat
+
+    while true; do
+        DIALOG --title " Ayarlamak için bir disk bölümü seçiniz. " --menu "$MENULABEL" \
+            ${MENUSIZE} $(show_partitions)
+        [ $? -ne 0 ] && return
+
+        dev=$(cat $ANSWER)
+        DIALOG --title " $dev için bir dosya sistemi seçiniz. " \
+            --menu "$MENULABEL" ${MENUSIZE} \
+            "btrfs" "Oracle's Btrfs" \
+            "ext2" "Linux ext2 (no journaling)" \
+            "ext3" "Linux ext3 (journal)" \
+            "ext4" "Linux ext4 (journal)" \
+            "f2fs" "Flash-Friendly Filesystem" \
+            "swap" "Linux swap" \
+            "vfat" "FAT32" \
+            "xfs" "SGI's XFS"
+        if [ $? -eq 0 ]; then
+            fstype=$(cat $ANSWER)
+        else
+            continue
+        fi
+        if [ "$fstype" != "swap" ]; then
+            DIALOG --inputbox " $dev için bir bağlama noktası seçiniz:" ${INPUTSIZE}
+            if [ $? -eq 0 ]; then
+                mntpoint=$(cat $ANSWER)
+            elif [ $? -eq 1 ]; then
+                continue
+            fi
+        else
+            mntpoint=swap
+        fi
+        DIALOG --yesno " $dev üzerinde yeni bir dosya sistemi oluşturmak istiyor musunuz?" ${YESNOSIZE}
+        if [ $? -eq 0 ]; then
+            reformat=1
+        elif [ $? -eq 1 ]; then
+            reformat=0
+        else
+            continue
+        fi
+        fssize=$(lsblk -nr $dev|awk '{print $4}')
+        set -- "$fstype" "$fssize" "$mntpoint" "$reformat"
+        if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then
+            local bdev=$(basename $dev)
+            local ddev=$(basename $(dirname $dev))
+            if [ "$ddev" != "dev" ]; then
+                sed -i -e "/^MOUNTPOINT \/dev\/${ddev}\/${bdev}.*/d" $CONF_FILE
+            else
+                sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $CONF_FILE
+            fi
+            echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$CONF_FILE
+        fi
+    done
+}
+
+menu_partitions() {
+    DIALOG --title " Bölümleme yapmak için bir disk seçiniz. " \
+        --menu "$MENULABEL" ${MENUSIZE} $(show_disks)
+    if [ $? -eq 0 ]; then
+        local device=$(cat $ANSWER)
+
+        DIALOG --title "Modify Partition Table on $device" --msgbox "\n
+${BOLD}cfdisk will be executed in disk $device.${RESET}\n\n
+For BIOS systems, MBR or GPT partition tables are supported.\n
+To use GPT on PC BIOS systems an empty partition of 1MB must be added\n
+at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n
+${BOLD}NOTE: you don't need this on EFI systems.${RESET}\n\n
+For EFI systems GPT is mandatory and a FAT32 partition with at least\n
+100MB must be created with the TOGGLE \`boot', this will be used as\n
+EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n
+At least 1 partitions is required for the rootfs (/).\n
+For swap, RAM*2 must be really enough. For / 600MB are required.\n\n
+${BOLD}WARNING: /usr is not supported as a separate partition.${RESET}\n
+${RESET}\n" 18 80
+        if [ $? -eq 0 ]; then
+            while true; do
+                clear; cfdisk $device; PARTITIONS_DONE=1
+                break
+            done
+        else
+            return
+        fi
+    fi
+}
+
+menu_keymap() {
+    local _keymaps="$(find /lib/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort)"
+    local _KEYMAPS=
+
+    for f in ${_keymaps}; do
+        _KEYMAPS="${_KEYMAPS} ${f} -"
+    done
+    while true; do
+        DIALOG --title " Select your keymap " --menu "$MENULABEL" 14 70 14 ${_KEYMAPS}
+        if [ $? -eq 0 ]; then
+            set_option KEYMAP "$(cat $ANSWER)"
+            loadkeys "$(cat $ANSWER)"
+            KEYBOARD_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_keymap() {
+    local KEYMAP=$(get_option KEYMAP)
+
+    if [ -f /etc/vconsole.conf ]; then
+        sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/vconsole.conf
+    else
+        sed -i -e "s|#\?KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/rc.conf
+    fi
+}
+
+menu_locale() {
+    local _locales="$(locale --all-locales |awk '{print $1}'|sed -e 's/^#//')"
+    local _LOCALES=
+
+    for f in ${_locales}; do
+        _LOCALES="${_LOCALES} ${f} -"
+    done
+    while true; do
+        DIALOG --title " yerel bilgi seçimi " --menu "$MENULABEL" 14 70 14 ${_LOCALES}
+        if [ $? -eq 0 ]; then
+            set_option LOCALE "$(cat $ANSWER)"
+            LOCALE_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_locale() {
+    if [ -f $TARGETDIR/etc/default/libc-locales ]; then
+        #yerelleştirme ayarı yapılacak bashrc de değişim olacak.
+        local LOCALE=$(get_option LOCALE)
+        sed -i -e "s|LANG=.*|LANG=$LOCALE|g" $TARGETDIR/etc/locale.conf
+        # Uncomment locale from /etc/default/libc-locales and regenerate it.
+        sed -e "/${LOCALE}/s/^\#//" -i $TARGETDIR/etc/default/libc-locales
+    fi
+}
+
+menu_timezone() {
+    local _tzones="$(cd /usr/share/zoneinfo; find Africa/ America/ Antarctica/ Arctic/ Asia/ Atlantic/ Australia/ Europe/ Indian/ Pacific/ posix/ -type f | sort)"
+    local _TIMEZONES=
+
+    for f in ${_tzones}; do
+        _TIMEZONES="${_TIMEZONES} ${f} -"
+    done
+    while true; do
+        DIALOG --title " Select your timezone " --menu "$MENULABEL" 14 70 14 ${_TIMEZONES}
+        if [ $? -eq 0 ]; then
+            set_option TIMEZONE "$(cat $ANSWER)"
+            TIMEZONE_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_timezone() {
+    local TIMEZONE="$(get_option TIMEZONE)"
+
+    sed -i -e "s|#TIMEZONE=.*|TIMEZONE=$TIMEZONE|g" $TARGETDIR/etc/rc.conf
+}
+
+menu_hostname() {
+    while true; do
+        DIALOG --inputbox "Set the machine hostname:" ${INPUTSIZE}
+        if [ $? -eq 0 ]; then
+            set_option HOSTNAME "$(cat $ANSWER)"
+            HOSTNAME_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_hostname() {
+    echo $(get_option HOSTNAME) > $TARGETDIR/etc/hostname
+}
+
+menu_rootpassword() {
+    local _firstpass= _secondpass= _desc=
+
+    while true; do
+        if [ -n "${_firstpass}" ]; then
+            _desc="Enter the root password again (password won't be displayed)"
+        else
+            _desc="Enter the root password (password won't be displayed)"
+        fi
+        DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE}
+        if [ $? -eq 0 ]; then
+            if [ -z "${_firstpass}" ]; then
+                _firstpass="$(cat $ANSWER)"
+            else
+                _secondpass="$(cat $ANSWER)"
+            fi
+            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
+                if [ "${_firstpass}" != "${_secondpass}" ]; then
+                    DIALOG --infobox "Passwords do not match! please reenter it again" 6 80
+                    unset _firstpass _secondpass
+                    sleep 2 && continue
+                fi
+                set_option ROOTPASSWORD "${_firstpass}"
+                ROOTPASSWORD_DONE=1
+                break
+            fi
+        else
+            return
+        fi
+    done
+}
+
+set_rootpassword() {
+    echo "root:$(get_option ROOTPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512
+}
+
+menu_useraccount() {
+    local _firstpass= _secondpass= _desc=
+
+    while true; do
+        DIALOG --inputbox "Birincil kullanıcı adını seçin:" ${INPUTSIZE} "miliskuv"
+        if [ $? -eq 0 ]; then
+            set_option USERNAME "$(cat $ANSWER)"
+            USERNAME_DONE=1
+            break
+        else
+            return
+        fi
+    done
+
+    while true; do
+        if [ -n "${_firstpass}" ]; then
+            _desc="Enter the password for '$(get_option USERNAME)' again (password won't be displayed)"
+        else
+            _desc="Enter the password for '$(get_option USERNAME)' (password won't be displayed)"
+        fi
+        DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE}
+        if [ $? -eq 0 ]; then
+            if [ -z "${_firstpass}" ]; then
+                _firstpass="$(cat $ANSWER)"
+            else
+                _secondpass="$(cat $ANSWER)"
+            fi
+            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
+                if [ "${_firstpass}" != "${_secondpass}" ]; then
+                    DIALOG --infobox "Passwords do not match! please reenter it again" 6 80
+                    unset _firstpass _secondpass
+                    sleep 2 && continue
+                fi
+                set_option USERPASSWORD "${_firstpass}"
+                USERPASSWORD_DONE=1
+                break
+            fi
+        else
+            return
+        fi
+    done
+}
+
+set_useraccount() {
+    useradd -R $TARGETDIR -m -G wheel,audio,video,floppy,cdrom,optical,kvm,xbuilder \
+         "$(get_option USERNAME)"
+    echo "$(get_option USERNAME):$(get_option USERPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512
+}
+
+menu_bootloader() {
+    while true; do
+        DIALOG --title " Select the disk to install the bootloader" \
+            --menu "$MENULABEL" ${MENUSIZE} $(show_disks) none "Manage bootloader otherwise"
+        if [ $? -eq 0 ]; then
+            set_option BOOTLOADER "$(cat $ANSWER)"
+            BOOTLOADER_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_bootloader() {
+    local dev=$(get_option BOOTLOADER) grub_args=
+
+    if [ "$dev" = "none" ]; then return; fi
+
+    # Check if it's an EFI system via efivars module.
+    if [ -n "$EFI_SYSTEM" ]; then
+        grub_args="--target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=milis_grub --recheck"
+    fi
+    echo "Running grub-install $grub_args $dev..." >$LOG
+    chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+        failed to install GRUB to $dev!\nCheck $LOG for errors." ${MSGBOXSIZE}
+        DIE 1
+    fi
+    echo "Running grub-mkconfig on $TARGETDIR..." >$LOG
+    chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR${RESET}: \
+        failed to run grub-mkconfig!\nCheck $LOG for errors." ${MSGBOXSIZE}
+        DIE 1
+    fi
+}
+
+test_network() {
+    #ağ testi
+    if [ $? -eq 0 ]; then
+        DIALOG --msgbox "Ağ düzgün çalışıyor!" ${MSGBOXSIZE}
+        NETWORK_DONE=1
+        return 1
+    fi
+    DIALOG --msgbox "Ağda sorun var,gerekli ayarları yapınız." ${MSGBOXSIZE}
+}
+
+configure_wifi() {
+    local dev="$1" ssid enc pass _wpasupconf=/etc/wpa_supplicant/wpa_supplicant.conf
+
+    DIALOG --form "Wireless configuration for ${dev}\n(encryption type: wep or wpa)" 0 0 0 \
+        "SSID:" 1 1 "" 1 16 30 0 \
+        "Encryption:" 2 1 "" 2 16 4 3 \
+        "Password:" 3 1 "" 3 16 50 0 || return 1
+    set -- $(cat $ANSWER)
+    ssid="$1"; enc="$2"; pass="$3";
+
+    if [ -z "$ssid" ]; then
+        DIALOG --msgbox "Invalid SSID." ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$enc" -o "$enc" != "wep" -a "$enc" != "wpa" ]; then
+        DIALOG --msgbox "Invalid encryption type (possible values: wep or wpa)." ${MSXBOXSIZE}
+        return 1
+    elif [ -z "$pass" ]; then
+        DIALOG --msgbox "Invalid AP password." ${MSGBOXSIZE}
+    fi
+
+    rm -f ${_wpasupconf%.conf}-${dev}.conf
+    cp -f ${_wpasupconf} ${_wpasupconf%.conf}-${dev}.conf
+    if [ "$enc" = "wep" ]; then
+        echo "network={" >> ${_wpasupconf%.conf}-${dev}.conf
+        echo "  ssid=\"$ssid\"" >> ${_wpasupconf%.conf}-${dev}.conf
+        echo "  wep_key0=\"$pass\"" >> ${_wpasupconf%.conf}-${dev}.conf
+        echo "  wep_tx_keyidx=0" >> ${_wpasupconf%.conf}-${dev}.conf
+        echo "  auth_alg=SHARED" >> ${_wpasupconf%.conf}-${dev}.conf
+        echo "}" >> ${_wpasupconf%.conf}-${dev}.conf
+    else
+        wpa_passphrase "$ssid" "$pass" >> ${_wpasupconf%.conf}-${dev}.conf
+    fi
+
+    configure_net_dhcp $dev
+    return $?
+}
+
+configure_net() {
+    local dev="$1" rval
+
+    DIALOG --yesno "Do you want to use DHCP for $dev?" ${YESNOSIZE}
+    rval=$?
+    if [ $rval -eq 0 ]; then
+        configure_net_dhcp $dev
+    elif [ $rval -eq 1 ]; then
+        configure_net_static $dev
+    fi
+}
+
+iface_setup() {
+    ip addr show dev $1|grep -q 'inet '
+    return $?
+}
+
+configure_net_dhcp() {
+    local dev="$1"
+
+    iface_setup $dev
+    if [ $? -eq 1 ]; then
+        dhcpcd -t 10 -w -4 -L $dev -e "wpa_supplicant_conf=/etc/wpa_supplicant/wpa_supplicant-${dev}.conf" 2>&1 | tee $LOG | \
+            DIALOG --progressbox "Initializing $dev via DHCP..." ${WIDGET_SIZE}
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to run dhcpcd. See $LOG for details." ${MSGBOXSIZE}
+            return 1
+        fi
+        iface_setup $dev
+        if [ $? -eq 1 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} DHCP request failed for $dev. Check $LOG for errors." ${MSGBOXSIZE}
+            return 1
+        fi
+    fi
+    test_network
+    if [ $? -eq 1 ]; then
+        set_option NETWORK "${dev} dhcp"
+    fi
+}
+
+configure_net_static() {
+    local ip gw dns1 dns2 dev=$1
+
+    DIALOG --form "Static IP configuration for $dev:" 0 0 0 \
+        "IP address:" 1 1 "192.168.0.2" 1 21 20 0 \
+        "Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \
+        "DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \
+        "DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1
+
+    set -- $(cat $ANSWER)
+    ip=$1; gw=$2; dns1=$3; dns2=$4
+    echo "running: ip link set dev $dev up" >$LOG
+    ip link set dev $dev up >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to bring $dev interface." ${MSGBOXSIZE}
+        return 1
+    fi
+    echo "running: ip addr add $ip dev $dev"
+    ip addr add $ip dev $dev >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to set ip to the $dev interface." ${MSGBOXSIZE}
+        return 1
+    fi
+    ip route add $gw dev $dev >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to setup your gateway." ${MSGBOXSIZE}
+        return 1
+    fi
+    echo "nameserver $dns1" >/etc/resolv.conf
+    echo "nameserver $dns2" >>/etc/resolv.conf
+    test_network
+    if [ $? -eq 1 ]; then
+        set_option NETWORK "${dev} static $ip $gw $dns1 $dns2"
+    fi
+}
+
+menu_network() {
+    local dev addr f DEVICES
+
+    for f in $(ls /sys/class/net); do
+        [ "$f" = "lo" ] && continue
+        addr=$(cat /sys/class/net/$f/address)
+        DEVICES="$DEVICES $f $addr"
+    done
+    DIALOG --title " Select the network interface to configure " \
+        --menu "$MENULABEL" ${MENUSIZE} ${DEVICES}
+    if [ $? -eq 0 ]; then
+        dev=$(cat $ANSWER)
+        if $(echo $dev|egrep -q "^wl.*" 2>/dev/null); then
+            configure_wifi $dev
+        else
+            configure_net $dev
+        fi
+    fi
+}
+
+validate_filesystems() {
+    local mnts dev size fstype mntpt mkfs rootfound fmt
+    local usrfound efi_system_partition
+
+    unset TARGETFS
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        dev=$2; fstype=$3; size=$4; mntpt="$5"; mkfs=$6
+        shift 6
+
+        if [ "$mntpt" = "/" ]; then
+            rootfound=1
+        elif [ "$mntpt" = "/usr" ]; then
+            usrfound=1
+        elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then
+            efi_system_partition=1
+        fi
+        if [ "$mkfs" -eq 1 ]; then
+            fmt="NEW FILESYSTEM: "
+        fi
+        if [ -z "$TARGETFS" ]; then
+            TARGETFS="${fmt}$dev ($size) mounted on $mntpt as ${fstype}\n"
+        else
+            TARGETFS="${TARGETFS}${fmt}${dev} ($size) mounted on $mntpt as ${fstype}\n"
+        fi
+    done
+    if [ -z "$rootfound" ]; then
+        DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
+kökdizin (/) için bağlama noktası ayarlı değil." ${MSGBOXSIZE}
+        return 1
+    elif [ -n "$usrfound" ]; then
+        DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
+/usr bağlama noktası desteklenmiyor,siliniz." ${MSGBOXSIZE}
+        return 1
+    elif [ -n "$EFI_SYSTEM" -a -z "$efi_system_partition" ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+The EFI System Partition has not yet been configured, please create it\n
+as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${MSGBOXSIZE}
+    fi
+    FILESYSTEMS_DONE=1
+}
+
+create_filesystems() {
+    local mnts dev mntpt fstype fspassno mkfs size rv uuid
+
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        dev=$2; fstype=$3; mntpt="$5"; mkfs=$6
+        shift 6
+
+        # swap partitions
+        if [ "$fstype" = "swap" ]; then
+            swapoff $dev >/dev/null 2>&1
+            if [ "$mkfs" -eq 1 ]; then
+                mkswap $dev >$LOG 2>&1
+                if [ $? -ne 0 ]; then
+                    DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to create swap on ${dev}!\ncheck $LOG for errors." ${MSGBOXSIZE}
+                    DIE 1
+                fi
+            fi
+            swapon $dev >$LOG 2>&1
+            if [ $? -ne 0 ]; then
+                DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to activate swap on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE}
+                DIE 1
+            fi
+            # Add entry for target fstab
+            uuid=$(blkid -o value -s UUID "$dev")
+            echo "UUID=$uuid none swap sw 0 0" >>$TARGET_FSTAB
+            continue
+        fi
+
+        if [ "$mkfs" -eq 1 ]; then
+            case "$fstype" in
+            btrfs) MKFS="mkfs.btrfs -f"; modprobe btrfs >$LOG 2>&1;;
+            ext2) MKFS="mke2fs -F"; modprobe ext2 >$LOG 2>&1;;
+            ext3) MKFS="mke2fs -F -j"; modprobe ext3 >$LOG 2>&1;;
+            ext4) MKFS="mke2fs -F -t ext4"; modprobe ext4 >$LOG 2>&1;;
+            f2fs) MKFS="mkfs.f2fs"; modprobe f2fs >$LOG 2>&1;;
+            vfat) MKFS="mkfs.vfat -F32"; modprobe vfat >$LOG 2>&1;;
+            xfs) MKFS="mkfs.xfs -f"; modprobe xfs >$LOG 2>&1;;
+            esac
+            DIALOG --infobox "Creating filesystem $fstype on $dev for $mntpt ..." 8 60
+            echo "Running $MKFS $dev..." >$LOG
+            $MKFS $dev >$LOG 2>&1; rv=$?
+            if [ $rv -ne 0 ]; then
+                DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
+ $dev $fstype dosyasistemi oluşturma esnasında hata oluştu!\nayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE}
+                DIE 1
+            fi
+        fi
+        # Mount rootfs the first one.
+        [ "$mntpt" != "/" ] && continue
+        mkdir -p $TARGETDIR
+        echo " $dev noktası $mntpt a bağlanıyor($fstype)..." >$LOG
+        mount -t $fstype $dev $TARGETDIR >$LOG 2>&1
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+ $dev bağlanması ${mntpt} esnasında hata oluştu! ayrıntı için $LOG dosyasına bakınız." ${MSGBOXSIZE}
+            DIE 1
+        fi
+        # Add entry to target fstab
+        uuid=$(blkid -o value -s UUID "$dev")
+        if [ "$fstype" = "f2fs" ]; then
+            fspassno=0
+        else
+            fspassno=1
+        fi
+        echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB
+    done
+
+    # mount all filesystems in target rootfs
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        dev=$2; fstype=$3; mntpt="$5"
+        shift 6
+        [ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue
+        mkdir -p ${TARGETDIR}${mntpt}
+        echo "Mounting $dev on $mntpt ($fstype)..." >$LOG
+        mount -t $fstype $dev ${TARGETDIR}${mntpt} >$LOG 2>&1
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}HATA:${RESET} \
+failed to mount $dev on $mntpt! check $LOG for errors." ${MSGBOXSIZE}
+            DIE
+        fi
+        # Add entry to target fstab
+        uuid=$(blkid -o value -s UUID "$dev")
+        echo "UUID=$uuid $mntpt $fstype defaults 0 2" >>$TARGET_FSTAB
+    done
+}
+
+mount_filesystems() {
+    for f in sys proc dev; do
+        [ ! -d $TARGETDIR/$f ] && mkdir $TARGETDIR/$f
+        echo "Mounting $TARGETDIR/$f..." >$LOG
+        mount --bind /$f $TARGETDIR/$f >$LOG 2>&1
+    done
+}
+
+umount_filesystems() {
+    local f
+
+    for f in sys/fs/fuse/connections sys proc dev; do
+        echo "Unmounting $TARGETDIR/$f..." >$LOG
+        umount $TARGETDIR/$f >$LOG 2>&1
+    done
+    local mnts="$(grep -E '^MOUNTPOINT.*$' $CONF_FILE)"
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        local dev=$2; local fstype=$3; local mntpt=$5
+        shift 6
+        if [ "$fstype" = "swap" ]; then
+            echo "Disabling swap space on $dev..." >$LOG
+            swapoff $dev >$LOG 2>&1
+            continue
+        fi
+        if [ "$mntpt" != "/" ]; then
+            echo "Unmounting $TARGETDIR/$mntpt..." >$LOG
+            umount $TARGETDIR/$mntpt >$LOG 2>&1
+        fi
+    done
+    echo "Unmounting $TARGETDIR..." >$LOG
+    umount $TARGETDIR >$LOG 2>&1
+}
+
+copy_rootfs() {
+    DIALOG --title "Ayrıntı için $LOG a bakınız" \
+        --infobox "Çalışan ortam hedef noktaya kopyalanıyor,lütfen bekleyiniz ..." 4 60
+    LANG=C cp -axvnu / $TARGETDIR >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIE 1
+    fi
+}
+
+install_packages() {
+    local _grub= _syspkg=
+
+    if [ -n "$EFI_SYSTEM" ]; then
+        _grub="grub-x86_64-efi"
+    else
+        _grub="grub"
+    fi
+
+    _syspkg="base-system"
+
+    #temel sistem paketleri kurulacak
+}
+
+enable_dhcpd() {
+    #dhcp hedef kurulum noktasında ayarlanacak
+}
+
+menu_install() {
+    # Don't continue if filesystems are not ready.
+    validate_filesystems || return 1
+
+	#şimdilik kapalı
+    ROOTPASSWORD_DONE=1 #"$(get_option ROOTPASSWORD)"
+    BOOTLOADER_DONE=1 #"$(get_option BOOTLOADER)"
+
+    if [ -z "$FILESYSTEMS_DONE" ]; then
+        DIALOG --msgbox "${BOLD}Gerekli dosya sistemi ayarlı değil, \
+	gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$ROOTPASSWORD_DONE" ]; then
+        DIALOG --msgbox "${BOLD}Root şifresi ayarlı değil, \
+	gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$BOOTLOADER_DONE" ]; then
+        DIALOG --msgbox "${BOLD}Bootloader için disk ayarlı değil, \
+	gerekli ayarlamayı yaptıktan sonra kuruluma başlayınız.${RESET}" ${MSGBOXSIZE}
+        return 1
+    fi
+
+    DIALOG --yesno "${BOLD}Şu işlemler uygulanacak:${RESET}\n\n
+	${BOLD}${TARGETFS}${RESET}\n
+	${BOLD}${RED}UYARI: YENİ DOSYA SİSTEMİ İÇİN HEDEF BÖLÜMDEKİ TÜM DATA SİLİNECEK.${RESET}\n\n
+	${BOLD}Devam etmek istiyor musunuz?${RESET}" 20 80 || return
+    unset TARGETFS
+
+    # Create and mount filesystems
+    create_filesystems
+	copy_rootfs
+    rm -r -f $TARGETDIR/tmp/*
+	DIALOG --title "Ayrıntılar için $LOG kontrol ediniz." \
+		--infobox "Hedef için başlatıcı ayarı yapılıyor ..." 4 60
+	echo "Hedef için başlatıcı ayarı yapılıyor ..." >$LOG
+	# mount required fs
+	mount_filesystems
+	chroot $TARGETDIR dracut --no-hostonly --add-drivers "ahci" --force >>$LOG 2>&1
+        
+
+    DIALOG --infobox "Kurulum ayarları uygulanıyor..." 4 60
+
+    # copy target fstab.
+    install -Dm644 $TARGET_FSTAB $TARGETDIR/etc/fstab
+    # Mount /tmp as tmpfs.
+    echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >> $TARGETDIR/etc/fstab
+
+
+    # set up keymap, locale, timezone, hostname and root passwd.-simdilik kapali
+    #set_keymap
+    #set_locale
+    #set_timezone
+    #set_hostname
+    #set_rootpassword
+    #set_useraccount
+
+    
+
+    # install bootloader.-simdilik kapali
+    #set_bootloader
+    
+    sync && sync && sync
+
+    # unmount all filesystems.
+    umount_filesystems
+
+    # installed successfully.
+    DIALOG --yesno "${BOLD}Milis İşletim Sistemi başarıyla kuruldu!${RESET}\n
+	Bilgisayar yeniden başlatılsın mı?" ${YESNOSIZE}
+    if [ $? -eq 0 ]; then
+        shutdown -r now
+    else
+        return
+    fi
+}
+
+menu_source() {
+    local src=
+
+    DIALOG --title " Select installation source " \
+        --menu "$MENULABEL" 8 70 0 \
+        "Local" "Packages from ISO image" \
+        "Network" "Packages from official remote reposity"
+    case "$(cat $ANSWER)" in
+        "Local") src="local";;
+        "Network") src="net";
+            if [ -z "$NETWORK_DONE" ]; then
+                menu_network;
+            fi;;
+        *) return 1;;
+    esac
+    SOURCE_DONE=1
+    set_option SOURCE $src
+}
+
+menu() {
+    if [ -z "$DEFITEM" ]; then
+        DEFITEM="Keyboard"
+    fi
+
+    DIALOG --default-item $DEFITEM \
+        --extra-button --extra-label "Ayarlar" \
+        --title " Milis İşletim Sistemi kurulumu menüsü " \
+        --menu "$MENULABEL" 10 70 0 \
+        "Dosyasistemi" "Dosya sistemlerini ayarlama,gerekli bağlamalar" \
+        "Kur" "Kayıt edilen ayarlarla kuruluma başlanması" \
+        "Çıkış" "Kurulumdan çıkış"
+
+    if [ $? -eq 3 ]; then
+        # Show settings
+        cp $CONF_FILE /tmp/conf_hidden.$$;
+        sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$
+        DIALOG --title "Kurulum için ayarlar kayıt edildi." --textbox /tmp/conf_hidden.$$ 14 60
+        rm /tmp/conf_hidden.$$
+        return
+    fi
+
+    case $(cat $ANSWER) in
+        "Dosyasistemi") menu_filesystems && [ -n "$FILESYSTEMS_DONE" ] && DEFITEM="Kur";;
+        "Kur") menu_install;;
+        "Çıkış") DIE;;
+        *) DIALOG --yesno "Kurulumu iptal et?" ${YESNOSIZE} && DIE
+    esac
+}
+
+if [ ! -x /bin/dialog ]; then
+    echo "ERROR: missing dialog command, exiting..."
+    exit 1
+fi
+#
+# main()
+#
+DIALOG --title "${BOLD}${RED} Milis İşletim Sistemi Hakkında ... ${RESET}" --msgbox "\n
+Milis işletim sistemi kurulumuna hoşgeldiniz. Milis sıfırdan kaynak kodlardan 
+oluşturulan yerli bağımsız bir işletim sistemidir.Kendine özgü mps isimli paket yöneticisine sahiptir.\
+Mps ile hem derleme talimatları kullanılarak paket üretilebilir hem de direk ikili paketlerin kurulumu sağlanır.
+irtibat için ${BOLD}#milisarge on irc.freenode.org${RESET}.\n\n
+${BOLD}milisarge@gmail.com${RESET}\n\n" 16 80
+
+while true; do
+    menu
+done
+
+exit 0
+# vim: set ts=4 sw=4 et: