diff --git a/talimatname/genel/libdnet/talimat b/talimatname/genel/libdnet/talimat
new file mode 100644
index 000000000..005731c26
--- /dev/null
+++ b/talimatname/genel/libdnet/talimat
@@ -0,0 +1,18 @@
+# Description: ARP arkaplan çalıştırma ve araçlar
+# URL:         http://arpon.sf.net
+# Packager:    milisarge
+# Depends on:  libpcap libnet 
+
+name=libdnet
+version=1.11
+release=1
+source=(http://download.sourceforge.net/$name/$name-$version.tar.gz)
+
+build() {
+    cd  $name-$version
+    autoreconf -i -Iconfig
+    ./configure --prefix=/usr \
+                --mandir=/usr/man
+    make
+    make install DESTDIR=$PKG
+}
diff --git a/talimatname/genel/libmspack/talimat b/talimatname/genel/libmspack/talimat
new file mode 100644
index 000000000..f21473e7c
--- /dev/null
+++ b/talimatname/genel/libmspack/talimat
@@ -0,0 +1,18 @@
+# Description: Microsoft sıkıştırma kütüphaneleri
+# URL: http://www.cabextract.org.uk/libmspack/
+# Packager: milisarge
+# Depends on: 
+
+name=libmspack
+version=1.5
+release=1
+source=(https://github.com/kyz/libmspack/archive/v$version.tar.gz)
+
+build() {
+  cd $name-$version/$name/trunk
+  autoreconf -vfi
+  ./configure --prefix=/usr --disable-static
+  make
+  make check
+  make DESTDIR="$PKG/" install
+}
diff --git a/talimatname/genel/open-vm-tools/README b/talimatname/genel/open-vm-tools/README
new file mode 100644
index 000000000..3de139860
--- /dev/null
+++ b/talimatname/genel/open-vm-tools/README
@@ -0,0 +1,45 @@
+README for open-vm-tools
+
+INTRODUCTION
+
+This port contains VMware Tools.  You should install it if you are running CRUX
+as a virtual machine under the VMware hypervisor.
+This has only been tested on single core 32-bit virtual machines.
+The VMware filesystem (vmhgfs) has not been tested.
+Feedback is appreciated.
+
+POST-INSTALL
+
+1. Run the post-install script.
+2. Add vmtools to the list of services to start at boot time.
+
+FAQ
+
+Q: What is the difference between this and the official commercial VMware Tools
+   distribution?
+
+A: This code comes from the GPL release of VMware's tools, so in theory
+   it should work just as the commercial version.
+   That said, since this port is intended to be used on a server environment,
+   all the desktop utilities have been removed (eg: no GUI applications).
+
+Q: Where is the driver for the VMware network adapter and disk controller?
+
+A: Some device drivers are already included in the Linux kernel and disabled
+   in this port.
+   Please enable these kernel options:
+   * CONFIG_VMWARE_BALLOON
+   * CONFIG_VMWARE_PVSCSI
+   * CONFIG_VMXNET3
+   If your boot filesystem is connected to a paravirtual SCSI interface make
+   sure CONFIG_VMWARE_PVSCSI is set as builtin instead of module.
+   
+
+Q: Why do I have to shutdown/reboot twice my VM from VMware before it reacts?
+
+A: Did you run the post-install script?
+
+
+--
+If you have any feedback/problems please email me:
+Alan Mizrahi, alan at mizrahi dot com dot ve
diff --git a/talimatname/genel/open-vm-tools/talimat b/talimatname/genel/open-vm-tools/talimat
new file mode 100644
index 000000000..596afeb4c
--- /dev/null
+++ b/talimatname/genel/open-vm-tools/talimat
@@ -0,0 +1,41 @@
+# Description:	VMWare Araçları
+# URL:		    http://open-vm-tools.sf.net/
+# Packager:     milisarge
+# Depends on:	    libdnet glib libmspack
+
+name=open-vm-tools
+version=10.1.5
+release=1
+source=(https://github.com/vmware/open-vm-tools/archive/stable-${version/_/-}.tar.gz
+		vmtools.rc
+		tools.conf)
+
+build(){
+	cd $name-stable-$version
+	cd $name
+	sed -ie 's|-Werror||g' configure.ac
+	autoreconf -iv
+	CXXFLAGS+=' -std=gnu++11 -fpermissive '
+    CFLAGS+=' -fpermissive '
+	CUSTOM_PROCPS_NAME=procps \
+	./configure \
+		--prefix=/usr \
+		--disable-static \
+		--without-root-privileges \
+		--without-x \
+		--without-gtk2 \
+		--without-xmlsecurity \
+		--without-gtkmm \
+		--without-icu \
+		--without-pam \
+		--without-kernel-modules
+	make
+	make DESTDIR=$PKG install
+	mv $PKG/usr/sbin/mount.vmhgfs $PKG/sbin/mount.vmhgfs
+	install -D $SRC/vmtools.rc $PKG/etc/rc.d/init.d/vmtools
+
+	rm -rf $PKG/usr/{etc,sbin,share} $PKG/etc/vmware-tools/scripts/vmware/network
+	rm -f $PKG/usr/lib/open-vm-tools/plugins/common/*.la
+
+	install -m644 $SRC/tools.conf $PKG/etc/vmware-tools/tools.conf
+}
diff --git a/talimatname/genel/open-vm-tools/tools.conf b/talimatname/genel/open-vm-tools/tools.conf
new file mode 100644
index 000000000..266d3854f
--- /dev/null
+++ b/talimatname/genel/open-vm-tools/tools.conf
@@ -0,0 +1,11 @@
+[logging]
+log=syslog
+level=warning
+vmsvc.level=warning
+vmsvc.data=/var/log/vmware-vmsvc.log
+vmusr.handler=syslog
+vmusr.level=warning
+vmusr.data=/var/log/vmware-vmsvc.log.user
+
+[vmsvc]
+disable-tools-version=true
diff --git a/talimatname/genel/open-vm-tools/vmtools.rc b/talimatname/genel/open-vm-tools/vmtools.rc
new file mode 100755
index 000000000..71db6e4f4
--- /dev/null
+++ b/talimatname/genel/open-vm-tools/vmtools.rc
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+NAME=vmtools
+USER=root
+CONFIG="/etc/vmware-tools/tools.conf"
+RUNDIR="/var/run"
+PIDFILE="$RUNDIR/vmtoolsd.pid"
+STARTCMD="/usr/bin/vmtoolsd --config=$CONFIG --background=$PIDFILE"
+STOPCMD=""
+STOPTIMEOUT=300
+
+function getpid() {
+	if [ -z "$PIDFILE" ]; then
+		pid="$(pgrep -xfn "$STARTCMD")"
+	else
+		if [ -f "$PIDFILE" ]; then
+			pid=$(< $PIDFILE)
+			if [ ! -d /proc/"$pid" ]; then
+				echo "$NAME: removing stale pidfile $PIDFILE" >&2
+				rm -f "$PIDFILE"
+				unset pid
+			fi
+		fi
+	fi
+	echo "$pid"
+}
+
+case $1 in
+start)
+	pid=$(getpid)
+	install -d -m 755 -o $USER $RUNDIR || exit 1
+	if [ -n "$pid" ]; then
+		echo "$NAME already running with pid $pid" >&2
+		exit 1
+	fi
+	eval "$STARTCMD"
+	;;
+stop)
+	pid=$(getpid)
+	if [ -n "$pid" ]; then
+		if [ -n "$STOPCMD" ]; then
+			eval "$STOPCMD"
+		else
+			kill "$pid"
+		fi
+		t=$(printf '%(%s)T' -1)
+		tend=$((t+STOPTIMEOUT))
+		while [ -d /proc/$pid -a $t -lt $tend ]; do
+			sleep 0.5
+			t=$(printf '%(%s)T' -1)
+		done
+		if [ -d /proc/"$pid" ]; then
+			echo "$NAME still running with pid $pid" >&2
+		else
+			[ -n "$PIDFILE" ] && rm -f "$PIDFILE"
+		fi
+	else
+		echo "$NAME is not running" >&2
+	fi
+	;;
+restart)
+	$0 stop
+	$0 start
+	;;
+status)
+	pid=$(getpid)
+	if [ -n "$pid" ]; then
+		echo "$NAME is running with pid $pid"
+	else
+		echo "$NAME is not running"
+	fi
+	;;
+*)
+	echo "usage: $0 [start|stop|restart|status]"
+	;;
+esac
+