# gameplaySP # # Copyright (C) 2006 Exophase # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA #include "../gpsp_config.h" .align 4 #define defsymbl(symbol) \ .global symbol ; \ .global _##symbol ; \ symbol: \ _##symbol: // Windows 32 bit ABI prefixes functions with underscore #if defined(_WIN32) && !defined(_WIN64) #define fnm(name) _##name #else #define fnm(name) name #endif // Convention calls are different, and register allocations, which makes it tricky // All functions in this file are called manually from the JIT arena (unless stated // otherwise), where we use our own convention call. However calls to C code must // follow the calling convention. x86 is built with regparm=2 to avoid stack usage. #if defined(__x86_64__) || defined(__amd64__) #define JUMP_CX_ZERO jrcxz #define ADDR_TYPE .quad #define ADDR_SIZE_BYTES 8 #define STACK_REG %rsp #define FULLREG(rn) %r##rn #define SAVE_REGISTERS push %rbx; push %rsi; push %rdi; push %rbp #define REST_REGISTERS pop %rbp; pop %rdi; pop %rsi; pop %rbx #define REG_BASE %rbx #ifdef _WIN64 #define CARG1_REG %ecx // Windows x64 ABI, of course different :D #define CARG2_REG %edx #define CARG2_REGPTR %rdx #define CALL_FUNC(name) \ sub $32, %rsp; \ call fnm(name); \ add $32, %rsp #else #define CARG1_REG %edi // SystemV AMD64 ABI #define CARG2_REG %esi #define CARG2_REGPTR %rsi #define CALL_FUNC(name) \ call fnm(name) #endif #define SETUP_ARGS mov %eax, CARG1_REG; mov %edx, CARG2_REG; #else #define JUMP_CX_ZERO jecxz #define ADDR_TYPE .long #define ADDR_SIZE_BYTES 4 #define STACK_REG %esp #define FULLREG(rn) %e##rn #define SAVE_REGISTERS sub $8, %esp; push %ebx; push %esi; push %edi; push %ebp #define REST_REGISTERS pop %ebp; pop %edi; pop %esi; pop %ebx; add $8, %esp; #define REG_BASE %ebx #define CARG1_REG %eax #define CARG2_REG %edx #define CARG2_REGPTR %edx #define SETUP_ARGS #define CALL_FUNC(name) \ call fnm(name) #endif .equ REG_SP, (13 * 4) .equ REG_LR, (14 * 4) .equ REG_PC, (15 * 4) .equ REG_CPSR, (16 * 4) .equ CPU_MODE, (17 * 4) .equ CPU_HALT_STATE, (18 * 4) .equ REG_BUS_VALUE, (19 * 4) .equ REG_N_FLAG, (20 * 4) .equ REG_Z_FLAG, (21 * 4) .equ REG_C_FLAG, (22 * 4) .equ REG_V_FLAG, (23 * 4) .equ CHANGED_PC_STATUS, (24 * 4) .equ COMPLETED_FRAME, (25 * 4) .equ OAM_UPDATED, (26 * 4) .equ REG_SAVE, (27 * 4) .equ REG_SAVE2, (28 * 4) .equ REG_SAVE3, (29 * 4) .equ REG_SAVE4, (30 * 4) .equ REG_SAVE5, (31 * 4) .equ load_u8_tbl, -(9 * 16 * ADDR_SIZE_BYTES) .equ load_s8_tbl, -(8 * 16 * ADDR_SIZE_BYTES) .equ load_u16_tbl, -(7 * 16 * ADDR_SIZE_BYTES) .equ load_s16_tbl, -(6 * 16 * ADDR_SIZE_BYTES) .equ load_u32_tbl, -(5 * 16 * ADDR_SIZE_BYTES) .equ store_u8_tbl, -(4 * 16 * ADDR_SIZE_BYTES) .equ store_u16_tbl, -(3 * 16 * ADDR_SIZE_BYTES) .equ store_u32_tbl, -(2 * 16 * ADDR_SIZE_BYTES) .equ store_aligned_u32_tbl, -(1 * 16 * ADDR_SIZE_BYTES) .equ PALETTE_RAM_OFF, 0x0100 .equ PALETTE_RAM_CNV_OFF, 0x0500 .equ OAM_RAM_OFF, 0x0900 .equ IWRAM_OFF, 0x0D00 .equ VRAM_OFF, 0x10D00 .equ EWRAM_OFF, 0x28D00 .equ IORAM_OFF, 0xA8D00 .equ SPSR_OFF, 0xA9100 .equ RDMAP_OFF, 0xA9200 #define REG_CYCLES %ebp # destroys ecx and edx .macro collapse_flag offset, shift mov \offset(REG_BASE), %ecx shl $\shift, %ecx or %ecx, %edx .endm .macro collapse_flags_no_update xor %edx, %edx collapse_flag REG_N_FLAG, 31 collapse_flag REG_Z_FLAG, 30 collapse_flag REG_C_FLAG, 29 collapse_flag REG_V_FLAG, 28 mov REG_CPSR(REG_BASE), %ecx and $0xFF, %ecx or %ecx, %edx .endm .macro collapse_flags collapse_flags_no_update mov %edx, REG_CPSR(REG_BASE) .endm .macro extract_flag shift, offset mov REG_CPSR(REG_BASE), %edx shr $\shift, %edx and $0x01, %edx mov %edx, \offset(REG_BASE) .endm .macro extract_flags extract_flag 31, REG_N_FLAG extract_flag 30, REG_Z_FLAG extract_flag 29, REG_C_FLAG extract_flag 28, REG_V_FLAG .endm # Process a hardware event. Since an interrupt might be # raised we have to check if the PC has changed. # arg0 (always in eax): current PC address defsymbl(x86_update_gba) mov %eax, REG_PC(REG_BASE) # current PC = eax collapse_flags # update cpsr, trashes ecx and edx mov REG_CYCLES, CARG1_REG # Load remaining cycles as arg0 CALL_FUNC(update_gba) # process the next event mov %eax, REG_CYCLES # new cycle count # did we just complete a frame? go back to main then cmpl $0, COMPLETED_FRAME(REG_BASE) jne return_to_main # did the PC change? cmpl $1, CHANGED_PC_STATUS(REG_BASE) je lookup_pc ret # if not, go back to caller # Perform this on an indirect branch that will definitely go to # ARM code, IE anything that changes the PC in ARM mode except # for BX and data processing to PC with the S bit set. # arg0 (always in eax): GBA address to branch to defsymbl(x86_indirect_branch_arm) mov %eax, CARG1_REG CALL_FUNC(block_lookup_address_arm) add $ADDR_SIZE_BYTES, STACK_REG # remove current return addr jmp *FULLREG(ax) # For indirect branches that'll definitely go to Thumb. In # Thumb mode any indirect branches except for BX. # arg0 (always in eax): GBA address to branch to defsymbl(x86_indirect_branch_thumb) mov %eax, CARG1_REG CALL_FUNC(block_lookup_address_thumb) add $ADDR_SIZE_BYTES, STACK_REG # remove current return addr jmp *FULLREG(ax) # For indirect branches that can go to either Thumb or ARM, # mainly BX (also data processing to PC with S bit set, be # sure to adjust the target with a 1 in the lowest bit for this) # arg0 (always in eax): GBA address to branch to defsymbl(x86_indirect_branch_dual) mov %eax, CARG1_REG CALL_FUNC(block_lookup_address_dual) add $ADDR_SIZE_BYTES, STACK_REG # remove current return addr jmp *FULLREG(ax) # General ext memory routines ext_store_rtc8: # No RTC writes on byte or word access ext_store_rtc32: ext_store_backup16: # Backup (flash) accessed via byte writes ext_store_backup32: ext_store_ignore: ret # ignore these writes ext_store_rtc16: and $0xFFFF, %edx # make value 16bit and $0xFF, %eax # mask address SETUP_ARGS # Setup addr, value CALL_FUNC(write_rtc) # write out RTC register ret ext_store_backup8: and $0xFF, %edx # make value 8bit and $0xFFFF, %eax # mask address SETUP_ARGS # Setup addr, value CALL_FUNC(write_backup) # perform backup write ret write_epilogue: cmp $0, %eax # 0 return means nothing happened jz no_alert # if so we can leave collapse_flags # make sure flags are good for function call cmp $2, %eax # see if it was an SMC trigger je smc_write alert_loop: mov REG_CYCLES, CARG1_REG # Load remaining cycles as arg0 CALL_FUNC(update_gba) # process the next event mov %eax, REG_CYCLES # load new cycle count # did we just complete a frame? go back to main then cmpl $0, COMPLETED_FRAME(REG_BASE) jne return_to_main # see if the halt status has changed mov CPU_HALT_STATE(REG_BASE), %edx cmp $0, %edx # 0 means it has jnz alert_loop # if not go again jmp lookup_pc # pc has definitely changed no_alert: ret ext_store_eeprom: CALL_FUNC(write_eeprom) # perform eeprom write ret # Register wrapping for various sizes #define reg32(n) %e##n##x #define reg16(n) %##n##x #define reg8(n) %##n##l # 16 bit bus results in duplicated 8bit accesses #define dup8() mov %dl, %dh #define noop() # Writes to EWRAM and IWRAM must check for SMC #define smc_check_store_aligned(opsuf, addrexp) #define smc_check_store(opsuf, addrexp) ;\ cmp##opsuf $0, addrexp /* Check SMC mirror */ ;\ jne smc_write # Memory write routines #define write_stubs(fname, wsize, opsuf, regfn, regfn16, addrm, dup8fn) ;\ ;\ /* eax: address to write to */ ;\ /* edx: value to write */ ;\ ;\ defsymbl(execute_##fname##_u##wsize) ;\ mov %eax, %ecx /* ecx = address */ ;\ shr $24, %ecx /* ecx = address >> 24 */ ;\ cmp $15, %ecx ;\ ja ext_store_ignore ;\ /* ecx = ext_store_u*_jtable[address >> 24] */ ;\ jmp *fname##_u##wsize##_tbl(REG_BASE, FULLREG(cx), ADDR_SIZE_BYTES) ;\ ;\ ext_##fname##_iwram##wsize: ;\ and $(0x7FFF & addrm), %eax /* Addr wrap */ ;\ mov regfn(d), (IWRAM_OFF+0x8000)(REG_BASE, FULLREG(ax)) /* Actual write */ ;\ smc_check_##fname(opsuf, IWRAM_OFF(REG_BASE, FULLREG(ax))) ;\ ret ;\ ;\ ext_##fname##_ewram##wsize: ;\ and $(0x3FFFF & addrm), %eax /* Addr wrap */ ;\ mov regfn(d), EWRAM_OFF(REG_BASE, FULLREG(ax)) /* Actual write */ ;\ smc_check_##fname(opsuf, (EWRAM_OFF+0x40000)(REG_BASE, FULLREG(ax))) ;\ ret ;\ ;\ ext_##fname##_vram##wsize: ;\ and $(0x1FFFE & addrm), %eax /* Addr wrap */ ;\ dup8fn() /* Double byte for 8b access */ ;\ cmp $0x18000, %eax /* Weird 96KB mirror */ ;\ jb 1f ;\ sub $0x8000, %eax /* Mirror last bank */ ;\ 1: ;\ mov regfn16(d), VRAM_OFF(REG_BASE, FULLREG(ax)) /* Actual write */ ;\ ret ;\ ;\ ext_##fname##_oam##wsize: ;\ and $(0x3FE & addrm), %eax /* Addr wrap */ ;\ movl $1, OAM_UPDATED(REG_BASE) /* flag OAM update */ ;\ dup8fn() /* Double byte for 8b access */ ;\ mov regfn16(d), OAM_RAM_OFF(REG_BASE, FULLREG(ax)) /* Actual write */ ;\ ret ;\ ;\ ext_##fname##_io##wsize: ;\ and $(0x3FF & addrm), %eax /* Addr wrap */ ;\ SETUP_ARGS ;\ CALL_FUNC(write_io_register##wsize) /* Call C code */ ;\ jmp write_epilogue /* Might need an update */ ;\ write_stubs(store, 32, l, reg32, reg32, ~3, noop) write_stubs(store, 16, w, reg16, reg16, ~1, noop) write_stubs(store, 8, b, reg8, reg16, ~0, dup8) write_stubs(store_aligned, 32, l, reg32, reg32, ~3, noop) # Palette routines are a bit special, due to 16bit bus + decoded palette ext_store_palette8: and $0x3FE, %eax # wrap around address and align to 16bits mov %dl, %dh # duplicate the byte to be written jmp ext_store_palette16b # perform 16bit palette write ext_store_palette16: and $0x3FF, %eax # wrap around address ext_store_palette16b: # entry point for 8bit write mov %dx, PALETTE_RAM_OFF(REG_BASE, FULLREG(ax)) # write out palette value mov %edx, %ecx # cx = dx shl $11, %ecx # cx <<= 11 (red component is in high bits) mov %dh, %cl # bottom bits of cx = top bits of dx shr $2, %cl # move the blue component to the bottom of cl and $0x03E0, %dx # isolate green component of dx shl $1, %dx # make green component 6bits or %edx, %ecx # combine green component into ecx # write out the freshly converted palette value mov %cx, PALETTE_RAM_CNV_OFF(REG_BASE, FULLREG(ax)) ret # done ext_store_palette32: and $0x3FF, %eax # wrap around address call ext_store_palette16b # write first 16bits add $2, %eax # go to next address shr $16, %edx # go to next 16bits jmp ext_store_palette16b # write next 16bits # Memory load routines #define load_stubs(rtype, movop, addrm, albits, slowfn) ;\ ;\ /* eax: address to read */ ;\ /* edx: current PC address */ ;\ ;\ defsymbl(execute_load_##rtype) ;\ mov %eax, %ecx /* ecx = address */ ;\ rol $8, %ecx /* ecx = ror(address, 24) */ ;\ and $((1<<(8+albits))-1), %ecx /* preserve align+msb */ ;\ cmp $15, %ecx ;\ ja ext_load_slow##rtype ;\ jmp *load_##rtype##_tbl(REG_BASE, FULLREG(cx), ADDR_SIZE_BYTES) ;\ ;\ ext_load_iwram##rtype: ;\ and $(0x7FFF & addrm), %eax /* Addr wrap */ ;\ movop (IWRAM_OFF+0x8000)(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_ewram##rtype: ;\ and $(0x3FFFF & addrm), %eax /* Addr wrap */ ;\ movop EWRAM_OFF(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_vram##rtype: ;\ and $(0x1FFFF & addrm), %eax /* Addr wrap */ ;\ cmp $0x18000, %eax /* Weird 96KB mirror */ ;\ jb 1f ;\ sub $0x8000, %eax /* Mirror last bank */ ;\ 1: ;\ movop VRAM_OFF(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_oam##rtype: ;\ and $(0x3FF & addrm), %eax /* Addr wrap */ ;\ movop OAM_RAM_OFF(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_palette##rtype: ;\ and $(0x3FF & addrm), %eax /* Addr wrap */ ;\ movop PALETTE_RAM_OFF(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_io##rtype: ;\ and $(0x3FF & addrm), %eax /* Addr wrap */ ;\ movop IORAM_OFF(REG_BASE, FULLREG(ax)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_rom##rtype: ;\ mov %eax, %edx /* edx = address */ ;\ shr $15, %edx /* edx = address >> 15 */ ;\ /* Read rdmap pointer */ ;\ mov RDMAP_OFF(REG_BASE, FULLREG(dx), ADDR_SIZE_BYTES), FULLREG(cx) ;\ JUMP_CX_ZERO ext_load_slow##rtype /* page not loaded, slow */ ;\ mov %eax, %edx /* edx = address */ ;\ and $0x7FFF, %edx /* edx = address LSB */ ;\ movop (FULLREG(cx), FULLREG(dx)), %eax /* Read mem */ ;\ ret ;\ ;\ ext_load_slow##rtype: ;\ mov %edx, REG_PC(REG_BASE) /* Store current PC */ ;\ SETUP_ARGS ;\ CALL_FUNC(slowfn) ;\ ret ;\ load_stubs(u32, mov, ~3, 2, read_memory32) load_stubs(u16, movzwl, ~1, 1, read_memory16) load_stubs(s16, movswl, ~1, 1, read_memory16s) load_stubs( u8, movzbl, ~0, 0, read_memory8) load_stubs( s8, movsbl, ~0, 0, read_memory8s) # arg0 (%eax) = new_cpsr # arg1 (%edx) = store_mask (user mode) # arg2 (%ecx) = store_mask (system mode) defsymbl(execute_store_cpsr) testl $0x10, CPU_MODE(REG_BASE) # check privileged mode bit cmovne %ecx, %edx # use system mode mask if set mov %edx, %esi # save store_mask for later mov %eax, %ecx # ecx = new_cpsr and %edx, %ecx # ecx = new_cpsr & store_mask mov REG_CPSR(REG_BASE), %eax # eax = cpsr not %edx # edx = ~store_mask and %edx, %eax # eax = cpsr & ~store_mask or %ecx, %eax # eax = new cpsr combined with old mov %eax, REG_CPSR(REG_BASE) # save new cpsr to register # Check whether any side effects (IRQ) could have happened test $0xff, %esi jnz 1f extract_flags # pull out flag vars from new CPSR ret 1: CALL_FUNC(execute_store_cpsr_body) # do the dirty work in this C function extract_flags # pull out flag vars from new CPSR cmp $0, %eax # see if return value is 0 jnz 2f # might have changed the PC ret # return 2: # PC has changed, due to IRQ triggered mov %eax, CARG1_REG # Returned addr from C function CALL_FUNC(block_lookup_address_arm) # lookup new PC add $ADDR_SIZE_BYTES, STACK_REG # get rid of current return address jmp *FULLREG(ax) # On writes that overwrite code, cache is flushed and execution re-started smc_write: CALL_FUNC(flush_translation_cache_ram) lookup_pc: movl $0, CHANGED_PC_STATUS(REG_BASE) # Lookup new block and jump to it mov REG_PC(REG_BASE), CARG1_REG # Load PC as argument0 testl $0x20, REG_CPSR(REG_BASE) jz 1f ### Thumb mode CALL_FUNC(block_lookup_address_thumb) add $ADDR_SIZE_BYTES, STACK_REG # Can't return, discard addr jmp *FULLREG(ax) 1:# ARM mode CALL_FUNC(block_lookup_address_arm) add $ADDR_SIZE_BYTES, STACK_REG # Can't return, discard addr jmp *FULLREG(ax) # Called from C, args are platform dependant :/ # arg0 (eax/edi/ecx): cycle counter # arg1 (edx/rsi/rdx): reg base pointer defsymbl(execute_arm_translate_internal) # Save main context, since we need to return gracefully SAVE_REGISTERS # Pushes 16 or 32 bytes # The stack here is aligned to 16 bytes minus 4 or 8 bytes. mov CARG1_REG, REG_CYCLES # load cycle counter (arg0) mov CARG2_REGPTR, REG_BASE # load base register (arg1) extract_flags # load flag variables # (if the CPU is halted, do not start executing but # loop in the alert loop until it wakes up) cmpl $0, CPU_HALT_STATE(REG_BASE) je 1f call alert_loop # Need to push something to the stack 1: call lookup_pc # Go fetch and execute PC return_to_main: add $ADDR_SIZE_BYTES, STACK_REG # remove current return addr REST_REGISTERS # Restore saved registers ret #define load_table(atype) ;\ ADDR_TYPE ext_load_slow##atype /* 0x00 BIOS */;\ ADDR_TYPE ext_load_slow##atype /* 0x01 open read */;\ ADDR_TYPE ext_load_ewram##atype /* 0x02 EWRAM */;\ ADDR_TYPE ext_load_iwram##atype /* 0x03 IWRAM */;\ ADDR_TYPE ext_load_io##atype /* 0x04 I/O registers */;\ ADDR_TYPE ext_load_palette##atype /* 0x05 Palette RAM */;\ ADDR_TYPE ext_load_vram##atype /* 0x06 VRAM */;\ ADDR_TYPE ext_load_oam##atype /* 0x07 OAM RAM */;\ ADDR_TYPE ext_load_rom##atype /* 0x08 gamepak (or RTC) */;\ ADDR_TYPE ext_load_rom##atype /* 0x09 gamepak */;\ ADDR_TYPE ext_load_rom##atype /* 0x0A gamepak */;\ ADDR_TYPE ext_load_rom##atype /* 0x0B gamepak */;\ ADDR_TYPE ext_load_rom##atype /* 0x0C gamepak */;\ ADDR_TYPE ext_load_slow##atype /* 0x0D EEPROM (possibly) */;\ ADDR_TYPE ext_load_slow##atype /* 0x0E Flash ROM/SRAM */;\ ADDR_TYPE ext_load_slow##atype /* 0x0F open read */;\ #define store_table(asize) ;\ ADDR_TYPE ext_store_ignore /* 0x00 BIOS, ignore */;\ ADDR_TYPE ext_store_ignore /* 0x01 invalid, ignore */;\ ADDR_TYPE ext_store_ewram##asize /* 0x02 EWRAM */;\ ADDR_TYPE ext_store_iwram##asize /* 0x03 IWRAM */;\ ADDR_TYPE ext_store_io##asize /* 0x04 I/O registers */;\ ADDR_TYPE ext_store_palette##asize /* 0x05 Palette RAM */;\ ADDR_TYPE ext_store_vram##asize /* 0x06 VRAM */;\ ADDR_TYPE ext_store_oam##asize /* 0x07 OAM RAM */;\ ADDR_TYPE ext_store_rtc##asize /* 0x08 gamepak (RTC or ignore) */;\ ADDR_TYPE ext_store_ignore /* 0x09 gamepak, ignore */;\ ADDR_TYPE ext_store_ignore /* 0x0A gamepak, ignore */;\ ADDR_TYPE ext_store_ignore /* 0x0B gamepak, ignore */;\ ADDR_TYPE ext_store_ignore /* 0x0C gamepak, ignore */;\ ADDR_TYPE ext_store_eeprom /* 0x0D EEPROM (possibly) */;\ ADDR_TYPE ext_store_backup##asize /* 0x0E Flash ROM/SRAM */;\ ADDR_TYPE ext_store_ignore /* 0x0F ignore */;\ .data .align 16 defsymbl(x86_table_data) load_table(u8) load_table(s8) load_table(u16) load_table(s16) load_table(u32) store_table(8) store_table(16) store_table(32) # aligned word writes (non SMC signaling) ADDR_TYPE ext_store_ignore # 0x00 BIOS, ignore ADDR_TYPE ext_store_ignore # 0x01 invalid, ignore ADDR_TYPE ext_store_aligned_ewram32 # 0x02 EWRAM ADDR_TYPE ext_store_aligned_iwram32 # 0x03 IWRAM ADDR_TYPE ext_store_io32 # 0x04 I/O registers ADDR_TYPE ext_store_palette32 # 0x05 Palette RAM ADDR_TYPE ext_store_vram32 # 0x06 VRAM ADDR_TYPE ext_store_oam32 # 0x07 OAM RAM ADDR_TYPE ext_store_ignore # 0x08 gamepak, ignore (no RTC in 32bit) ADDR_TYPE ext_store_ignore # 0x09 gamepak, ignore ADDR_TYPE ext_store_ignore # 0x0A gamepak, ignore ADDR_TYPE ext_store_ignore # 0x0B gamepak, ignore ADDR_TYPE ext_store_ignore # 0x0C gamepak, ignore ADDR_TYPE ext_store_eeprom # 0x0D EEPROM (possibly) ADDR_TYPE ext_store_ignore # 0x0E Flash ROM/SRAM must be 8bit ADDR_TYPE ext_store_ignore # 0x0F ignore .bss .align 64 defsymbl(x86_table_info) .space 9*16*ADDR_SIZE_BYTES defsymbl(reg) .space 0x100 defsymbl(palette_ram) .space 0x400 defsymbl(palette_ram_converted) .space 0x400 defsymbl(oam_ram) .space 0x400 defsymbl(iwram) .space 0x10000 defsymbl(vram) .space 0x18000 defsymbl(ewram) .space 0x80000 defsymbl(io_registers) .space 0x400 defsymbl(spsr) .space 24 .space 8 # padding defsymbl(reg_mode) .space 196 .space 28 # padding defsymbl(memory_map_read) .space 8*1024*ADDR_SIZE_BYTES #ifndef MMAP_JIT_CACHE #error "x86 dynarec builds *require* MMAP_JIT_CACHE" #endif