# gameplaySP # # Copyright (C) 2006 Exophase # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA #include "../gpsp_config.h" // This is also defined in sys/asm.h but doesn't seem portable? #ifdef __mips64 .set mips64 #define SZREG 8 #define REG_L ld #define REG_S sd #else .set mips32r2 #define SZREG 4 #define REG_L lw #define REG_S sw #endif #define defsymbl(symbol) \ .type symbol, %function ;\ .global symbol ; \ symbol: #define defobj(symbol) \ .type symbol, %object ;\ .global symbol ; \ symbol: .align 4 # MIPS register layout: # $0 - constant zero # $1 - temporary # $2 - temporary / return value # $3 - ARM r0 (not saved) # $4 - temporary / function argument 0 # $5 - temporary / function argument 1 # $6 - temporary / function argument 2 # $7 - ARM r1 (not saved) # $8 - ARM r2 (not saved) # $9 - ARM r3 (not saved) # $10 - ARM r4 (not saved) # $11 - ARM r5 (not saved) # $12 - ARM r6 (not saved) # $13 - ARM r7 (not saved) # $14 - ARM r8 (not saved) # $15 - ARM r9 (not saved) # $16 - ARM machine state pointer (saved) # $17 - cycle counter (saved) # $18 - ARM r10 (saved) # $19 - block start address (roughly r15) (saved) # $20 - ARM negative register (saved) # $21 - ARM zero register (saved) # $22 - ARM carry register (saved) # $23 - ARM overflow register (saved) # $24 - ARM r11 (not saved) # $25 - ARM r12 (not saved) # $26 - kernel temporary 0 # $27 - kernel temporary 1 # $28 - ARM r13 (saved) # $29 - stack pointer # $30 - ARM r14 (saved) # $31 - return address .equ REG_R0, (0 * 4) .equ REG_R1, (1 * 4) .equ REG_R2, (2 * 4) .equ REG_R3, (3 * 4) .equ REG_R4, (4 * 4) .equ REG_R5, (5 * 4) .equ REG_R6, (6 * 4) .equ REG_R7, (7 * 4) .equ REG_R8, (8 * 4) .equ REG_R9, (9 * 4) .equ REG_R10, (10 * 4) .equ REG_R11, (11 * 4) .equ REG_R12, (12 * 4) .equ REG_R13, (13 * 4) .equ REG_R14, (14 * 4) .equ REG_PC, (15 * 4) .equ REG_CPSR, (16 * 4) .equ CPU_MODE, (17 * 4) .equ CPU_HALT_STATE, (18 * 4) .equ REG_N_FLAG, (20 * 4) .equ REG_Z_FLAG, (21 * 4) .equ REG_C_FLAG, (22 * 4) .equ REG_V_FLAG, (23 * 4) .equ CHANGED_PC_STATUS, (24 * 4) .equ COMPLETED_FRAME, (25 * 4) .equ OAM_UPDATED, (26 * 4) .equ REG_SAVE, (27 * 4) .equ REG_SAVE2, (28 * 4) .equ REG_SAVE3, (29 * 4) .equ GP_SAVE, (30 * 4) .equ GP_SAVE_HI, (31 * 4) .equ SPSR_BASE, (0x100 + 0x400 * 3) .equ REGMODE_BASE, (SPSR_BASE + 24) .equ SUPERVISOR_SPSR, (3 * 4 + SPSR_BASE) .equ SUPERVISOR_LR, ((3 * (7 * 4)) + (6 * 4) + REGMODE_BASE) .equ FNPTRS_MEMOPS, (REGMODE_BASE + 196) .equ FNPTRS_BASE, (FNPTRS_MEMOPS + 960*2) #define reg_cycles $17 .set noat .set noreorder # make sure $16 has the register base for these macros #ifdef MIPS_HAS_R2_INSTS .macro collapse_flag flag_reg, shift ins $2, $\flag_reg, \shift, 1 # insert flag into CPSR .endm .macro extract_flag shift, flag_reg ext $\flag_reg, $1, \shift, 1 # extract flag from CPSR .endm #else .macro collapse_flag flag_reg, shift sll $1, $\flag_reg, \shift or $2, $2, $1 .endm .macro extract_flag shift, flag_reg srl $\flag_reg, $1, \shift andi $\flag_reg, $\flag_reg, 1 .endm #endif .macro collapse_flags lw $2, REG_CPSR($16) # load CPSR andi $2, $2, 0xFF # isolate lower 8bits collapse_flag 20, 31 # store flags collapse_flag 21, 30 collapse_flag 22, 29 collapse_flag 23, 28 sw $2, REG_CPSR($16) # store CPSR .endm .macro extract_flags_body # extract flags from $1 extract_flag 31, 20 # load flags extract_flag 30, 21 extract_flag 29, 22 extract_flag 28, 23 .endm .macro extract_flags lw $1, REG_CPSR($16) # load CPSR extract_flags_body .endm .macro save_registers sw $3, REG_R0($16) sw $7, REG_R1($16) sw $8, REG_R2($16) sw $9, REG_R3($16) sw $10, REG_R4($16) sw $11, REG_R5($16) sw $12, REG_R6($16) sw $13, REG_R7($16) sw $14, REG_R8($16) sw $15, REG_R9($16) sw $24, REG_R11($16) sw $25, REG_R12($16) sw $18, REG_R10($16) sw $28, REG_R13($16) sw $30, REG_R14($16) REG_L $28, GP_SAVE($16) .endm .macro restore_registers lw $3, REG_R0($16) lw $7, REG_R1($16) lw $8, REG_R2($16) lw $9, REG_R3($16) lw $10, REG_R4($16) lw $11, REG_R5($16) lw $12, REG_R6($16) lw $13, REG_R7($16) lw $14, REG_R8($16) lw $15, REG_R9($16) lw $24, REG_R11($16) lw $25, REG_R12($16) lw $18, REG_R10($16) lw $28, REG_R13($16) lw $30, REG_R14($16) .endm # PIC ABI mandates to jump to target via $t9 #ifdef PIC .macro cfncall target, targetid lw $t9, (FNPTRS_BASE + \targetid * 4)($16) jalr $t9 nop .endm #else .macro cfncall target, targetid jal \target nop .endm #endif # Process a hardware event. Since an interrupt might be # raised we have to check if the PC has changed. # $4: next address # $16: register base # $17: cycle counter .balign 64 # This gets called every time the cycle counter runs out # (checked at every branch/jump) defsymbl(mips_update_gba) sw $4, REG_PC($16) # current PC = $4 sw $ra, REG_SAVE2($16) # save return addr collapse_flags # update cpsr save_registers # save registers sw $0, CHANGED_PC_STATUS($16) move $4, reg_cycles # Remaining cycles as asg0 cfncall update_gba, 0 # process the next event lw $1, COMPLETED_FRAME($16) # Check whether we completed a frame bne $1, $0, return_to_main # Return to main thread now move reg_cycles, $2 # update new cycle count (ret value) lw $ra, REG_SAVE2($16) # restore return address lw $1, CHANGED_PC_STATUS($16) bne $1, $0, lookup_pc nop restore_registers jr $ra # if not, go back to caller nop # Processes cheats whenever we hit the master PC defsymbl(mips_cheat_hook) sw $ra, REG_SAVE2($16) save_registers cfncall process_cheats, 8 lw $ra, REG_SAVE2($16) restore_registers jr $ra nop # Loads the main context and returns to it. # ARM regs must be saved before branching here return_to_main: REG_L $28, GP_SAVE($16) # Restore previous state REG_L $s0, 4*SZREG($sp) REG_L $s1, 5*SZREG($sp) REG_L $s2, 6*SZREG($sp) REG_L $s3, 7*SZREG($sp) REG_L $s4, 8*SZREG($sp) REG_L $s5, 9*SZREG($sp) REG_L $s6, 10*SZREG($sp) REG_L $s7, 11*SZREG($sp) REG_L $fp, 12*SZREG($sp) REG_L $ra, 13*SZREG($sp) jr $ra # Return to main addiu $sp, $sp, 112 # Restore stack pointer (delay slot) # Perform an indirect branch. # $4: GBA address to branch to defsymbl(mips_indirect_branch_arm) save_registers cfncall block_lookup_address_arm, 1 restore_registers jr $2 # $2 = value returned nop defsymbl(mips_indirect_branch_thumb) save_registers cfncall block_lookup_address_thumb, 2 restore_registers jr $2 # $2 = value returned nop defsymbl(mips_indirect_branch_dual) save_registers cfncall block_lookup_address_dual, 3 nop restore_registers jr $2 # $2 = value returned nop defsymbl(write_io_epilogue) beq $2, $0, no_alert # 0 means nothing happened addiu $4, $2, -2 # see if return value is 2 (delay slot) beq $4, $0, smc_dma # is it an SMC alert? (return value = 2) nop addiu $4, $2, -3 # see if return value is 3 beq $4, $0, irq_alert # is it an IRQ alert? (return value = 3) nop collapse_flags # make sure flags are good for update_gba alert_loop: move $4, reg_cycles # Remaining cycles as asg0 cfncall update_gba, 0 # process the next event move reg_cycles, $2 # update new cycle count (ret value) lw $1, COMPLETED_FRAME($16) # Check whether we completed a frame bne $1, $0, return_to_main # Return to main thread now lw $1, CPU_HALT_STATE($16) # check if CPU is sleeping bne $1, $0, alert_loop # see if it hasn't changed nop lw $4, REG_PC($16) # $4 = new PC j lookup_pc nop irq_alert: restore_registers j lookup_pc # PC has changed, get a new one nop no_alert: restore_registers lw $ra, REG_SAVE3($16) # restore return jr $ra # we can return nop smc_dma: cfncall flush_translation_cache_ram, 4 j lookup_pc nop defsymbl(smc_write) save_registers sw $6, REG_PC($16) # save PC cfncall flush_translation_cache_ram, 4 lookup_pc: lw $2, REG_CPSR($16) # $2 = cpsr andi $2, $2, 0x20 # isolate mode bit beq $2, $0, lookup_pc_arm # if T bit is zero use arm handler nop lookup_pc_thumb: lw $4, REG_PC($16) # load PC as arg 0 cfncall block_lookup_address_thumb, 2 # get Thumb address restore_registers jr $2 # jump to result nop lookup_pc_arm: lw $4, REG_PC($16) # load PC as arg 0 cfncall block_lookup_address_arm, 1 # get ARM address restore_registers jr $2 # jump to result nop # Return the current cpsr defsymbl(execute_read_cpsr) collapse_flags # fold flags into cpsr, put cpsr into $2 jr $ra # return nop # Return the current spsr defsymbl(execute_read_spsr) lw $1, CPU_MODE($16) # $1 = cpu_mode sll $1, $1, 2 # adjust to word offset size addu $2, $1, $16 jr $ra # return lw $2, SPSR_BASE($2) # $2 = spsr[cpu_mode] (delay slot) # Switch into SWI, has to collapse flags # $4: Current pc defsymbl(execute_swi) sw $ra, REG_SAVE3($16) sw $4, SUPERVISOR_LR($16) # store next PC in the supervisor's LR collapse_flags # get cpsr in $2 sw $2, SUPERVISOR_SPSR($16) # save cpsr in SUPERVISOR_CPSR srl $2, $2, 6 # zero out bottom 6 bits of CPSR sll $2, $2, 6 ori $2, (0x13 | 0x80) # mode supervisor + disable IRQs sw $2, REG_CPSR($16) # write back CPSR save_registers li $4, 3 # 3 is supervisor mode cfncall set_cpu_mode, 5 # set the CPU mode to supervisor lw $ra, REG_SAVE3($16) restore_registers jr $ra # return nop # $4: pc to restore to # returns in $4 defsymbl(execute_spsr_restore) lw $1, CPU_MODE($16) # $1 = cpu_mode beq $1, $0, no_spsr_restore # only restore if the cpu isn't usermode sll $2, $1, 2 # adjust to word offset size (delay) addu $2, $2, $16 lw $1, SPSR_BASE($2) # $1 = spsr[cpu_mode] sw $1, REG_CPSR($16) # cpsr = spsr[cpu_mode] extract_flags_body # extract flags from $1 sw $ra, REG_SAVE3($16) save_registers cfncall execute_spsr_restore_body, 6 # do the dirty work in this C function restore_registers lw $ra, REG_SAVE3($16) jr $ra addu $4, $2, $0 # move return value to $4 no_spsr_restore: jr $ra nop # $4: new cpsr # $5: current PC # $6: store mask defsymbl(execute_store_cpsr) and $1, $4, $6 # $1 = new_cpsr & store_mask lw $2, REG_CPSR($16) # $2 = current cpsr nor $4, $6, $0 # $4 = ~store_mask and $2, $2, $4 # $2 = (cpsr & (~store_mask)) or $1, $1, $2 # $1 = new cpsr combined with old extract_flags_body # extract flags from $1 andi $6, $6, 0xff # Check whether we overwrote mode bnez $6, 1f sw $1, REG_CPSR($16) # Store new CPSR (delay slot) jr $ra nop 1: sw $ra, REG_SAVE3($16) save_registers addu $4, $1, $0 # load the new CPSR cfncall execute_store_cpsr_body, 7 # do the dirty work in this C function bnez $2, 2f # this could have changed the pc nop restore_registers lw $ra, REG_SAVE3($16) jr $ra nop 2: addu $4, $2, $0 # load new address in $4 cfncall block_lookup_address_arm, 1 # GBA address is in $4 restore_registers # restore registers jr $2 # jump to the new address nop # $4: new spsr # $5: current PC (unused) # $6: store mask defsymbl(execute_store_spsr) lw $1, CPU_MODE($16) # $1 = cpu_mode sll $1, $1, 2 # adjust to word offset size addu $1, $1, $16 lw $2, SPSR_BASE($1) # $2 = spsr[cpu_mode] and $4, $4, $6 # $4 = new_spsr & store_mask nor $6, $6, $0 # $6 = ~store_mask and $2, $2, $6 # $2 = (spsr & (~store_mask)) or $4, $4, $2 # $4 = new spsr combined with old jr $ra # return sw $4, SPSR_BASE($1) # spsr[cpu_mode] = $4 (delay slot) # $4: cycle counter argument # $5: pointer to reg defsymbl(execute_arm_translate_internal) addiu $sp, $sp, -112 # Store the main thread context REG_S $s0, 4*SZREG($sp) REG_S $s1, 5*SZREG($sp) REG_S $s2, 6*SZREG($sp) REG_S $s3, 7*SZREG($sp) REG_S $s4, 8*SZREG($sp) REG_S $s5, 9*SZREG($sp) REG_S $s6, 10*SZREG($sp) REG_S $s7, 11*SZREG($sp) REG_S $fp, 12*SZREG($sp) REG_S $ra, 13*SZREG($sp) move $16, $5 REG_S $28, GP_SAVE($16) move reg_cycles, $4 # load cycle counter register extract_flags # load flag variables # CPU might be sleeping, do not wake ip up! lw $1, CPU_HALT_STATE($16) # check if CPU is sleeping bne $1, $0, alert_loop # see if it hasn't changed lw $1, REG_CPSR($16) and $1, $1, 0x20 # see if Thumb bit is set in flags bne $1, $0, 1f lw $4, REG_PC($16) # load PC into $4 (delay) cfncall block_lookup_address_arm, 1 restore_registers # load initial register values jr $2 # jump to return nop 1: cfncall block_lookup_address_thumb, 2 restore_registers # load initial register values jr $2 # jump to return nop .bss .align 6 defsymbl(iwram) .space 0x10000 defsymbl(vram) .space 0x18000 defsymbl(ewram) .space 0x80000 defsymbl(io_registers) .space 0x400 .data .align 6 defobj(memory_map_read) .space 0x8000 # memory_map_read is immediately before arm_reg on purpose (offset used # to access it, via lw op). We do not use write though. defobj(reg) .space 0x100 # Placed here for easy access defobj(palette_ram) .space 0x400 defobj(palette_ram_converted) .space 0x400 defobj(oam_ram) .space 0x400 defobj(spsr) .space 24 # u32[6] defobj(reg_mode) .space 196 # u32[7][7]; # Here we store: # void *tmemld[11][16]; # 10 types of loads # void *tmemst[ 4][16]; # 3 types of stores # Essentially a list of pointers to the different mem load handlers # Keep them close for a fast patcher. defobj(tmemld) .space 704 defobj(tmemst) .space 256 defobj(thnjal) .space 960 fnptrs: .long update_gba # 0 .long block_lookup_address_arm # 1 .long block_lookup_address_thumb # 2 .long block_lookup_address_dual # 3 .long flush_translation_cache_ram # 4 .long set_cpu_mode # 5 .long execute_spsr_restore_body # 6 .long execute_store_cpsr_body # 7 .long process_cheats # 8 #if !defined(MMAP_JIT_CACHE) # Make this section executable! .text #if defined(PSP) || defined(PS2) .section .bss #else # Need to mark the section as awx (for Linux) .section .jit,"awx",%nobits #endif .align 2 defsymbl(rom_translation_cache) .space ROM_TRANSLATION_CACHE_SIZE defsymbl(ram_translation_cache) .space RAM_TRANSLATION_CACHE_SIZE #endif