#include "../gpsp_config.h" #define defsymbl(symbol) \ .align 2; \ .type symbol, %function ;\ .global symbol ; \ .global _##symbol ; \ symbol: \ _##symbol: .text .align 2 #define REG_R0 (0 * 4) #define REG_R1 (1 * 4) #define REG_R2 (2 * 4) #define REG_R3 (3 * 4) #define REG_R4 (4 * 4) #define REG_R5 (5 * 4) #define REG_R6 (6 * 4) #define REG_R7 (7 * 4) #define REG_R8 (8 * 4) #define REG_R9 (9 * 4) #define REG_R10 (10 * 4) #define REG_R11 (11 * 4) #define REG_R12 (12 * 4) #define REG_R13 (13 * 4) #define REG_R14 (14 * 4) #define REG_SP (13 * 4) #define REG_LR (14 * 4) #define REG_PC (15 * 4) #define REG_CPSR (16 * 4) #define CPU_MODE (17 * 4) #define CPU_HALT_STATE (18 * 4) #define REG_N_FLAG (20 * 4) #define REG_Z_FLAG (21 * 4) #define REG_C_FLAG (22 * 4) #define REG_V_FLAG (23 * 4) #define CHANGED_PC_STATUS (24 * 4) #define COMPLETED_FRAME (25 * 4) #define OAM_UPDATED (26 * 4) #define REG_SAVE (27 * 4) #define REG_SAVE2 (28 * 4) #define REG_SAVE3 (29 * 4) #define REG_SAVE4 (30 * 4) #define REG_SAVE5 (31 * 4) #define reg_a0 r0 #define reg_a1 r1 #define reg_a2 r2 #define reg_base r11 #define reg_flags r9 #define reg_cycles r12 #define reg_x0 r3 #define reg_x1 r4 #define reg_x2 r5 #define reg_x3 r6 #define reg_x4 r7 #define reg_x5 r8 #define MODE_SUPERVISOR 3 @ Memory offsets from reg_base to the different buffers #define IWRAM_OFF -0xA8000 #define VRAM_OFF -0x98000 #define EWRAM_OFF -0x80000 #define SPSR_RAM_OFF 0x100 #define STORE_TBL_OFF 0x118 #define REGMODE_RAM_OFF 0x400 #define OAM_RAM_OFF 0x500 #define PAL_RAM_OFF 0x900 #define RDMAP_OFF 0xD00 #define IOREG_OFF 0x8D00 #if __ARM_ARCH >= 6 #define extract_u16(rd, rs) \ uxth rd, rs #else #define extract_u16(rd, rs) \ bic rd, rs, #0xff000000; \ bic rd, rd, #0x00ff0000 #endif @ Will load the register set from memory into the appropriate cached registers. @ See arm_emit.h for listing explanation. #define load_registers_arm() ;\ ldr reg_x0, [reg_base, #REG_R0] ;\ ldr reg_x1, [reg_base, #REG_R1] ;\ ldr reg_x2, [reg_base, #REG_R6] ;\ ldr reg_x3, [reg_base, #REG_R9] ;\ ldr reg_x4, [reg_base, #REG_R12] ;\ ldr reg_x5, [reg_base, #REG_R14] ;\ #define load_registers_thumb() ;\ ldm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5} @ Will store the register set from cached registers back to memory. #define store_registers_arm() ;\ str reg_x0, [reg_base, #REG_R0] ;\ str reg_x1, [reg_base, #REG_R1] ;\ str reg_x2, [reg_base, #REG_R6] ;\ str reg_x3, [reg_base, #REG_R9] ;\ str reg_x4, [reg_base, #REG_R12] ;\ str reg_x5, [reg_base, #REG_R14] ;\ #define store_registers_thumb() ;\ stm reg_base, {reg_x0, reg_x1, reg_x2, reg_x3, reg_x4, reg_x5} @ Returns an updated persistent cpsr with the cached flags register. @ Uses reg as a temporary register and returns the CPSR here. #define collapse_flags_no_update(reg) ;\ ldr reg, [reg_base, #REG_CPSR] /* reg = cpsr */;\ bic reg, reg, #0xF0000000 /* clear ALU flags in cpsr */;\ and reg_flags, reg_flags, #0xF0000000 /* clear non-ALU flags */;\ orr reg, reg, reg_flags /* update cpsr with ALU flags */;\ @ Updates cpsr using the above macro. #define collapse_flags(reg) ;\ collapse_flags_no_update(reg) ;\ str reg, [reg_base, #REG_CPSR] ;\ @ Loads the saved flags register from the persistent cpsr. #define extract_flags() ;\ ldr reg_flags, [reg_base, #REG_CPSR] ;\ msr cpsr_f, reg_flags ;\ #define save_flags() ;\ mrs reg_flags, cpsr ;\ #define restore_flags() ;\ msr cpsr_f, reg_flags ;\ @ Align the stack to 64 bits (ABIs that don't require it, still recommend so) #define call_c_saved_regs r2, r3, r12, lr @ Calls a C function - reloads the stack pointer and saves all caller save @ registers which are important to the dynarec. #define call_c_function(function) ;\ stmdb sp!, { call_c_saved_regs } ;\ bl function ;\ ldmia sp!, { call_c_saved_regs } ;\ @ Update the GBA hardware (video, sound, input, etc) @ Input: @ r0: current PC #define return_straight() ;\ bx lr ;\ #define return_add() ;\ add pc, lr, #4 ;\ #define load_pc_straight() ;\ ldr r0, [lr, #-12] ;\ #define load_pc_add() ;\ ldr r0, [lr] ;\ #define arm_update_gba_builder(name, mode, return_op) ;\ ;\ defsymbl(arm_update_gba_##name) ;\ load_pc_##return_op() ;\ str r0, [reg_base, #REG_PC] /* write out the PC */;\ ;\ save_flags() ;\ collapse_flags(r0) /* update the flags */;\ ;\ store_registers_##mode() /* save out registers */;\ call_c_function(update_gba) /* update GBA state */;\ ;\ ldr r1, [reg_base, #COMPLETED_FRAME] /* return if new frame */;\ cmp r1, #0 ;\ bne return_to_main ;\ ;\ mvn reg_cycles, r0 /* load new cycle count */;\ ;\ ldr r0, [reg_base, #CHANGED_PC_STATUS] /* load PC changed status */;\ cmp r0, #0 /* see if PC has changed */;\ bne 1f /* go jump/translate */;\ ;\ load_registers_##mode() /* reload registers */;\ restore_flags() ;\ return_##return_op() /* continue, no PC change */;\ ;\ 1: ;\ ldr r1, [reg_base, #REG_CPSR] /* r1 = flags */;\ ldr r0, [reg_base, #REG_PC] /* load new PC */;\ tst r1, #0x20 /* see if Thumb bit is set */;\ bne 2f /* if so load Thumb PC */;\ ;\ load_registers_arm() /* load ARM regs */;\ call_c_function(block_lookup_address_arm) ;\ restore_flags() ;\ bx r0 /* jump to new ARM block */;\ 2: ;\ load_registers_thumb() /* load Thumb regs */;\ call_c_function(block_lookup_address_thumb) ;\ restore_flags() ;\ bx r0 /* jump to new ARM block */;\ .size arm_update_gba_##name, .-arm_update_gba_##name arm_update_gba_builder(arm, arm, straight) arm_update_gba_builder(thumb, thumb, straight) arm_update_gba_builder(idle_arm, arm, add) arm_update_gba_builder(idle_thumb, thumb, add) @ Cheat hooks for master function @ This is called whenever PC == cheats-master-function @ Just calls the C function to process cheats #define cheat_hook_builder(mode) ;\ defsymbl(mode##_cheat_hook) ;\ save_flags() ;\ store_registers_##mode() ;\ call_c_function(process_cheats) ;\ load_registers_##mode() ;\ restore_flags() ;\ bx lr ;\ cheat_hook_builder(arm) cheat_hook_builder(thumb) @ These are b stubs for performing indirect branches. They are not @ linked to and don't return, instead they link elsewhere. @ Input: @ r0: PC to branch to defsymbl(arm_indirect_branch_arm) save_flags() call_c_function(block_lookup_address_arm) restore_flags() bx r0 defsymbl(arm_indirect_branch_thumb) save_flags() call_c_function(block_lookup_address_thumb) restore_flags() bx r0 defsymbl(arm_indirect_branch_dual_arm) save_flags() tst r0, #0x01 @ check lower bit bne 1f @ if set going to Thumb mode add r0, #2 @ two LSB are cleared after call_c_function(block_lookup_address_arm) restore_flags() bx r0 @ keep executing arm code 1: store_registers_arm() @ save out ARM registers ldr r1, [reg_base, #REG_CPSR] @ load cpsr load_registers_thumb() @ load in Thumb registers orr r1, r1, #0x20 @ set Thumb mode str r1, [reg_base, #REG_CPSR] @ store flags call_c_function(block_lookup_address_thumb) restore_flags() bx r0 .size arm_indirect_branch_dual_arm, .-arm_indirect_branch_dual_arm defsymbl(arm_indirect_branch_dual_thumb) save_flags() tst r0, #0x01 @ check lower bit beq 1f @ if set going to ARM mode call_c_function(block_lookup_address_thumb) restore_flags() bx r0 @ keep executing thumb code 1: store_registers_thumb() @ save out Thumb registers ldr r1, [reg_base, #REG_CPSR] @ load cpsr load_registers_arm() @ load in ARM registers bic r1, r1, #0x20 @ clear Thumb mode str r1, [reg_base, #REG_CPSR] @ store flags add r0, #2 @ two LSB are cleared after call_c_function(block_lookup_address_arm) restore_flags() bx r0 .size arm_indirect_branch_dual_thumb, .-arm_indirect_branch_dual_thumb @ Update the cpsr. @ Input: @ r0: new cpsr value @ r1: bitmask of which bits in cpsr to update @ r2: current PC defsymbl(execute_store_cpsr) save_flags() and reg_flags, r0, r1 @ reg_flags = new_cpsr & store_mask ldr r0, [reg_base, #REG_CPSR] @ r0 = cpsr bic r0, r0, r1 @ r0 = cpsr & ~store_mask orr reg_flags, reg_flags, r0 @ reg_flags = new_cpsr | cpsr mov r0, reg_flags @ also put new cpsr in r0 store_registers_arm() @ save ARM registers ldr r2, [lr] @ r2 = pc call_c_function(execute_store_cpsr_body) load_registers_arm() @ restore ARM registers cmp r0, #0 @ check new PC bne 1f @ if it's zero, resume restore_flags() add pc, lr, #4 @ return 1: call_c_function(block_lookup_address_arm) restore_flags() bx r0 @ return to PC ARM address .size execute_store_cpsr, .-execute_store_cpsr @ Restore the cpsr from the mode spsr and mode shift. @ Input: @ r0: current pc defsymbl(execute_spsr_restore) save_flags() add r1, reg_base, #SPSR_RAM_OFF @ r1 = spsr ldr r2, [reg_base, #CPU_MODE] @ r2 = cpu_mode ldr r1, [r1, r2, lsl #2] @ r1 = spsr[cpu_mode] (new cpsr) str r1, [reg_base, #REG_CPSR] @ update cpsr mov reg_flags, r1 @ also, update shadow flags @ This function call will pass r0 (address) and return it. store_registers_arm() @ save ARM registers call_c_function(execute_spsr_restore_body) ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr tst r1, #0x20 @ see if Thumb mode is set bne 2f @ if so handle it load_registers_arm() @ restore ARM registers call_c_function(block_lookup_address_arm) restore_flags() bx r0 2: load_registers_thumb() @ load Thumb registers call_c_function(block_lookup_address_thumb) restore_flags() bx r0 @ Setup the mode transition work for calling an SWI. @ Input: @ r0: current pc #define execute_swi_builder(mode) ;\ ;\ defsymbl(execute_swi_##mode) ;\ save_flags() ;\ add r1, reg_base, #REGMODE_RAM_OFF /* r1 = reg_mode */;\ /* reg_mode[MODE_SUPERVISOR][6] = pc */;\ ldr r0, [lr] /* load PC */;\ str r0, [r1, #((MODE_SUPERVISOR * (7 * 4)) + (6 * 4))] ;\ collapse_flags_no_update(r0) /* r0 = cpsr */;\ add r1, reg_base, #SPSR_RAM_OFF /* r1 = spsr */;\ str r0, [r1, #(MODE_SUPERVISOR * 4)] /* spsr[MODE_SUPERVISOR] = cpsr */;\ bic r0, r0, #0x3F /* clear mode flag in r0 */;\ orr r0, r0, #(0x13 | 0x80) /* supervisor mode + disable IRQ */;\ str r0, [reg_base, #REG_CPSR] /* update cpsr */;\ ;\ mov r0, #MODE_SUPERVISOR ;\ ;\ store_registers_##mode() /* store regs for mode */;\ call_c_function(set_cpu_mode) /* set the CPU mode to svsr */;\ load_registers_arm() /* load ARM regs */;\ ;\ restore_flags() ;\ add pc, lr, #4 /* return */;\ execute_swi_builder(arm) execute_swi_builder(thumb) @ Start program execution. Normally the mode should be Thumb and the @ PC should be 0x8000000, however if a save state is preloaded this @ will be different. @ Input: @ r0: initial value for cycle counter @ Uses sp as reg_base; must hold consistently true. defsymbl(execute_arm_translate_internal) @ save the registers to be able to return later stmdb sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr } mov reg_base, r1 @ init base_reg mvn reg_cycles, r0 @ load cycle counter @ Check whether the CPU is sleeping already, we should just wait for IRQs ldr r1, [reg_base, #CPU_HALT_STATE] cmp r1, #0 bne alert_loop ldr r0, [reg_base, #REG_PC] @ r0 = current pc ldr r1, [reg_base, #REG_CPSR] @ r1 = flags tst r1, #0x20 @ see if Thumb bit is set bne 1f @ if so lookup thumb load_registers_arm() @ load ARM registers call_c_function(block_lookup_address_arm) extract_flags() @ load flags bx r0 @ jump to first ARM block 1: load_registers_thumb() @ load Thumb registers call_c_function(block_lookup_address_thumb) extract_flags() @ load flags bx r0 @ jump to first Thumb block @ Epilogue to return to the main thread (whatever called execute_arm_translate) return_to_main: @ restore the saved regs and return ldmia sp!, { r4, r5, r6, r7, r8, r9, r10, r11, r12, lr } bx lr #define store_align_8() ;\ and r1, r1, #0xff ;\ #define store_align_16() ;\ bic r0, r0, #0x01 ;\ extract_u16(r1, r1) ;\ #define store_align_32() ;\ bic r0, r0, #0x03 ;\ #define mask_addr_8(nbits) ;\ mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\ mov r0, r0, lsr #(32 - nbits) /* high bits are now clear */;\ #define mask_addr_16(nbits) ;\ mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\ mov r0, r0, lsr #(32 - nbits + 1) /* high bits are now clear */;\ mov r0, r0, lsl #1 /* LSB is also zero */;\ #define mask_addr_32(nbits) ;\ mov r0, r0, lsl #(32 - nbits) /* isolate bottom n bits in top */;\ mov r0, r0, lsr #(32 - nbits + 2) /* high bits are now clear */;\ mov r0, r0, lsl #2 /* 2 LSB are also zero */;\ @ Vram, OAM and palette memories can only be accessed at a 16 bit boundary #define mask_addr_bus16_32(nbits) mask_addr_32(nbits) #define mask_addr_bus16_16(nbits) mask_addr_16(nbits) #define mask_addr_bus16_8(nbits) \ mask_addr_16(nbits) \ extract_u16(r1, r1) @ Write out to memory. @ Input: @ r0: address @ r1: value @ @ The instruction at LR is not an inst but a u32 data that contains the PC @ Used for SMC. That's why return is essentially `pc = lr + 4` #define execute_store_builder(store_type, str_op, str_op16, load_op, tnum) ;\ ;\ ext_store_u##store_type: ;\ save_flags() ;\ ldr r2, [lr] /* load PC */;\ str r2, [reg_base, #REG_PC] /* write out PC */;\ store_align_##store_type() ;\ call_c_function(write_memory##store_type) ;\ b write_epilogue /* handle additional write stuff */;\ ;\ ext_store_iwram_u##store_type: ;\ save_flags() ;\ mask_addr_##store_type(15) /* Mask to mirror memory (+align)*/;\ add r2, reg_base, #(IWRAM_OFF+0x8000) /* r2 = iwram base */;\ str_op r1, [r0, r2] /* store data */;\ sub r2, r2, #0x8000 /* r2 = iwram smc base */;\ load_op r1, [r0, r2] /* r1 = SMC sentinel */;\ cmp r1, #0 /* Check value, should be zero */;\ bne 3f /* if so perform smc write */;\ restore_flags() ;\ add pc, lr, #4 /* return */;\ ;\ ext_store_ewram_u##store_type: ;\ save_flags() ;\ mask_addr_##store_type(18) /* Mask to mirror memory (+align)*/;\ add r2, reg_base, #EWRAM_OFF /* r2 = ewram base */;\ str_op r1, [r0, r2] /* store data */;\ add r2, r2, #0x40000 /* r2 = ewram smc base */;\ load_op r1, [r0, r2] /* r1 = SMC sentinel */;\ cmp r1, #0 /* Check value, should be zero */;\ bne 3f /* if so perform smc write */;\ restore_flags() ;\ add pc, lr, #4 /* return */;\ ;\ ext_store_vram_u##store_type: ;\ save_flags() ;\ mask_addr_bus16_##store_type(17) /* Mask to mirror memory (+align)*/;\ cmp r0, #0x18000 /* Check if exceeds 96KB */;\ subcs r0, r0, #0x8000 /* Mirror to the last bank */;\ add r2, reg_base, #VRAM_OFF /* r2 = vram base */;\ restore_flags() ;\ str_op16 r1, [r0, r2] /* store data */;\ add pc, lr, #4 /* return */;\ ;\ ext_store_oam_ram_u##store_type: ;\ mask_addr_bus16_##store_type(10) /* Mask to mirror memory (+align)*/;\ add r2, reg_base, #OAM_RAM_OFF /* r2 = oam ram base */;\ str_op16 r1, [r0, r2] /* store data */;\ str r2, [reg_base, #OAM_UPDATED] /* write non zero to signal */;\ add pc, lr, #4 /* return */;\ ;\ 3: ;\ ldr r0, [lr] /* load PC */;\ str r0, [reg_base, #REG_PC] /* write out PC */;\ b smc_write /* perform smc write */;\ @ for ignored areas, just return ext_store_ignore: add pc, lr, #4 @ return #define store_lookup_table(store_type) ;\ .word ext_store_u##store_type /* -1: ignore, for > 0x0F */;\ .word ext_store_ignore /* 0x00: BIOS, ignore */;\ .word ext_store_ignore /* 0x01: ignore */;\ .word ext_store_ewram_u##store_type /* 0x02: ewram */;\ .word ext_store_iwram_u##store_type /* 0x03: iwram */;\ .word ext_store_u##store_type /* 0x04: I/O regs */;\ .word ext_store_u##store_type /* 0x05: palette RAM */;\ .word ext_store_vram_u##store_type /* 0x06: vram */;\ .word ext_store_oam_ram_u##store_type /* 0x07: oam ram */;\ .word ext_store_u##store_type /* 0x08: gamepak: ignore */;\ .word ext_store_u##store_type /* 0x09: gamepak: ignore */;\ .word ext_store_u##store_type /* 0x0A: gamepak: ignore */;\ .word ext_store_u##store_type /* 0x0B: gamepak: ignore */;\ .word ext_store_u##store_type /* 0x0C: gamepak: ignore */;\ .word ext_store_u##store_type /* 0x0D: EEPROM */;\ .word ext_store_u##store_type /* 0x0E: backup */;\ .word ext_store_ignore /* 0x0F: ignore */;\ execute_store_builder(8, strb, strh, ldrb, 0) execute_store_builder(16, strh, strh, ldrh, 1) execute_store_builder(32, str, str, ldr, 2) @ This is a store that is executed in a strm case (so no SMC checks in-between) ext_store_u32_safe: str lr, [reg_base, #REG_SAVE3] @ Restore lr save_flags() call_c_function(write_memory32) @ Perform 32bit store restore_flags() ldr pc, [reg_base, #REG_SAVE3] @ return ext_store_iwram_u32_safe: mask_addr_8(15) @ Mask to mirror memory (no need to align!) add r2, reg_base, #(IWRAM_OFF+0x8000) @ r2 = iwram base str r1, [r0, r2] @ store data bx lr @ Return ext_store_ewram_u32_safe: mask_addr_8(18) @ Mask to mirror memory (no need to align!) add r2, reg_base, #EWRAM_OFF @ r2 = ewram base str r1, [r0, r2] @ store data bx lr @ Return ext_store_vram_u32_safe: mask_addr_8(17) @ Mask to mirror memory (no need to align!) save_flags() add r2, reg_base, #VRAM_OFF @ r2 = vram base cmp r0, #0x18000 @ Check if exceeds 96KB subcs r0, r0, #0x8000 @ Mirror to the last bank str r1, [r0, r2] @ store data restore_flags() bx lr @ Return ext_store_oam_ram_u32_safe: mask_addr_8(10) @ Mask to mirror memory (no need to align!) add r2, reg_base, #OAM_RAM_OFF @ r2 = oam ram base str r1, [r0, r2] @ store data str r2, [reg_base, #OAM_UPDATED] @ store anything non zero here bx lr @ Return write_epilogue: cmp r0, #0 @ check if the write rose an alert beq 4f @ if not we can exit collapse_flags(r1) @ interrupt needs current flags cmp r0, #2 @ see if the alert is due to SMC beq smc_write @ if so, goto SMC handler ldr r1, [reg_base, #REG_CPSR] @ r1 = cpsr tst r1, #0x20 @ see if Thumb bit is set bne 1f @ if so do Thumb update store_registers_arm() @ save ARM registers b alert_loop 1: store_registers_thumb() @ save Thumb registers alert_loop: call_c_function(update_gba) @ update GBA until CPU isn't halted ldr r1, [reg_base, #COMPLETED_FRAME] @ Check whether a frame was completed cmp r1, #0 bne return_to_main ldr r1, [reg_base, #CPU_HALT_STATE] @ Check whether the CPU is halted cmp r1, #0 bne alert_loop @ Keep looping until it is mvn reg_cycles, r0 @ load new cycle count ldr r0, [reg_base, #REG_PC] @ load new PC ldr r1, [reg_base, #REG_CPSR] @ r1 = flags tst r1, #0x20 @ see if Thumb bit is set bne 2f load_registers_arm() call_c_function(block_lookup_address_arm) restore_flags() bx r0 @ jump to new ARM block 2: load_registers_thumb() call_c_function(block_lookup_address_thumb) restore_flags() bx r0 @ jump to new Thumb block 4: restore_flags() add pc, lr, #4 @ return smc_write: call_c_function(flush_translation_cache_ram) lookup_pc: ldr r0, [reg_base, #REG_PC] @ r0 = new pc ldr r1, [reg_base, #REG_CPSR] @ r1 = flags tst r1, #0x20 @ see if Thumb bit is set beq lookup_pc_arm @ if not lookup ARM lookup_pc_thumb: call_c_function(block_lookup_address_thumb) restore_flags() bx r0 @ jump to new Thumb block lookup_pc_arm: call_c_function(block_lookup_address_arm) restore_flags() bx r0 @ jump to new ARM block #define exec_ld_op_s8(mirrorbits) ;\ mov r0, r0, lsl #(32 - mirrorbits) ;\ mov r0, r0, lsr #(32 - mirrorbits) ;\ ldrsb r0, [r2, r0] #define exec_ld_op_u8(mirrorbits) ;\ mov r0, r0, lsl #(32 - mirrorbits) ;\ mov r0, r0, lsr #(32 - mirrorbits) ;\ ldrb r0, [r2, r0] #define exec_ld_op_s16(mirrorbits) ;\ mov r0, r0, lsl #(32 - mirrorbits) ;\ mov r0, r0, lsr #(32 - mirrorbits) ;\ ldrsh r0, [r2, r0] #define exec_ld_op_u16(mirrorbits) ;\ mov r0, r0, lsl #(32 - mirrorbits) ;\ mov r0, r0, lsr #(32 - mirrorbits) ;\ ldrh r0, [r2, r0] #define exec_ld_op_u32(mirrorbits) ;\ mov r0, r0, lsl #(32 - mirrorbits) ;\ ldr r0, [r2, r0, lsr #(32 - mirrorbits)] ;\ #define execute_load_builder(load_type, albits, load_function, tnum) ;\ ;\ ld_bios_##load_type: /* BIOS area, need to verify PC */;\ save_flags() ;\ ldr r1, [lr] /* r1 = PC */;\ mov r2, r1, lsr #15 /* r2 = High addr bits from PC */;\ cmp r2, #0 ;\ bne 10f /* Jump to slow handler */;\ ldr r2, [reg_base, #RDMAP_OFF] /* r2 = read_mem[0] */;\ exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\ restore_flags() ;\ add pc, lr, #4 ;\ ;\ ld_ewram_##load_type: /* EWRAM area */;\ add r2, reg_base, #EWRAM_OFF ;\ exec_ld_op_##load_type(18) /* Clear upper bits (18 LSB) */;\ add pc, lr, #4 ;\ ;\ ld_iwram_##load_type: /* IWRAM area */;\ add r2, reg_base, #(IWRAM_OFF+0x8000) ;\ exec_ld_op_##load_type(15) /* Clear upper bits (15 LSB) */;\ add pc, lr, #4 ;\ ;\ ld_ioram_##load_type: /* I/O RAM area */;\ add r2, reg_base, #IOREG_OFF ;\ exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\ add pc, lr, #4 ;\ ;\ ld_palram_##load_type: /* Palette RAM area */;\ add r2, reg_base, #PAL_RAM_OFF ;\ exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\ add pc, lr, #4 ;\ ;\ ld_oamram_##load_type: /* OAM RAM area */;\ add r2, reg_base, #OAM_RAM_OFF ;\ exec_ld_op_##load_type(10) /* Clear upper bits (10 LSB) */;\ add pc, lr, #4 ;\ ;\ /* ROM area (or VRAM): uses generic memory handlers */ ;\ ld_rdmap_##load_type: ;\ add r2, reg_base, #RDMAP_OFF /* r2 = memory_map_read */;\ mov r1, r0, lsr #15 /* r1 = page index of address */;\ ldr r2, [r2, r1, lsl #2] /* r2 = base addr */;\ ;\ exec_ld_op_##load_type(15) /* Pages are 32KB big */;\ add pc, lr, #4 ;\ ;\ /* Slow load path, for open/unmapped loads */;\ ld_slow_##load_type: ;\ save_flags() ;\ ldr r1, [lr] /* r1 = PC */;\ 10: ;\ str r1, [reg_base, #REG_PC] /* update PC */;\ call_c_function(load_function) ;\ restore_flags() ;\ add pc, lr, #4 /* return */;\ #define load_table_gen(load_type) ;\ .long ld_slow_##load_type /* -1 (for regions above F) */;\ .long ld_bios_##load_type /* 0 BIOS */;\ .long ld_slow_##load_type /* 1 Bad region */;\ .long ld_ewram_##load_type /* 2 EWRAM */;\ .long ld_iwram_##load_type /* 3 IWRAM */;\ .long ld_ioram_##load_type /* 4 I/O */;\ .long ld_palram_##load_type /* 5 Palette RAM, via map */;\ .long ld_rdmap_##load_type /* 6 VRAM area */;\ .long ld_oamram_##load_type /* 7 OAM RAM */;\ .long ld_rdmap_##load_type /* 8 ROM, via map */;\ .long ld_rdmap_##load_type /* 9 ROM, via map */;\ .long ld_rdmap_##load_type /* A ROM, via map */;\ .long ld_rdmap_##load_type /* B ROM, via map */;\ .long ld_rdmap_##load_type /* C ROM, via map */;\ .long ld_slow_##load_type /* D ROM or EEPROM/FLASH */;\ .long ld_slow_##load_type /* E EEPROM/FLASH */;\ .long ld_slow_##load_type /* F Bad region */;\ .pool execute_load_builder(u8, 0, read_memory8, 4) execute_load_builder(s8, 0, read_memory8s, 5) execute_load_builder(u16, 1, read_memory16, 6) execute_load_builder(s16, 1, read_memory16s, 7) execute_load_builder(u32, 2, read_memory32, 8) .data .align 4 defsymbl(ldst_handler_functions) store_lookup_table(8) store_lookup_table(16) store_lookup_table(32) store_lookup_table(32_safe) load_table_gen(u8) load_table_gen(s8) load_table_gen(u16) load_table_gen(s16) load_table_gen(u32) .bss .align 4 defsymbl(iwram) .space 0x10000 defsymbl(vram) .space 0x18000 defsymbl(ewram) .space 0x80000 defsymbl(reg) .space 0x100 defsymbl(spsr) .space 24 @ Place lookup tables here for easy access via base_reg too defsymbl(ldst_lookup_tables) .space 4*17*4 @ store .space 5*17*4 @ loads .space 132 @ Padding for alignment defsymbl(reg_mode) .space 196 .space 60 @ More padding! defsymbl(oam_ram) .space 0x400 defsymbl(palette_ram) .space 0x400 defsymbl(memory_map_read) .space 0x8000 defsymbl(io_registers) .space 0x400 defsymbl(palette_ram_converted) .space 0x400 @ Vita and 3DS (and of course mmap) map their own cache sections through some @ platform-speficic mechanisms. #if !defined(HAVE_MMAP) && !defined(VITA) && !defined(_3DS) @ Make this section executable! .text .section .jit,"awx",%nobits .align 4 defsymbl(rom_translation_cache) .space ROM_TRANSLATION_CACHE_SIZE .size rom_translation_cache, .-rom_translation_cache defsymbl(ram_translation_cache) .space RAM_TRANSLATION_CACHE_SIZE .size ram_translation_cache, .-ram_translation_cache #endif